2011 1100 cc Arctic Cat that stalls when coming to a stop. Doesn't do it all the times. Then starts right back up. Also backfires once in a while when you let the gas off.
Re: 2011 1100 cc Arctic Cat that stalls when coming to a...
The back fireing is common,but check the bushings in your drive clutch,when the inner goes bad,the clutch will not totally disingauge causing the sled to stall.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
sounds like it has been sitting, if you have never rebuilt a carb, best to bring it in,, the main jet is probably all gummed up,, you can try draining all your tank gas,, spraying carb cleaner into the carb after removing air cleaner but that really wont help out the main jet.. Stabil is a good product for gas if you are going to store your ride for awhile, it also acts to clean carbs while using a small amount when you fill up.
The mixture is too rich; too much unburned fuel vapor. This is what causes backfiring. Try using a slightly hotter spark plug first! If that doesn;t work, then Make sure the engine is fully warmed up and then lean the mixture an 1/8" of turn on the mixture screw... not more, and it should stop. If it still occurs, you will need to rebuild the carburetor. Get a welding tip cleaning wire tool from NAPA to help clean out the passages and ensure you check the float distance to assure it's within tolerance.
if this has been sitting,,even if it hasn't, #1clean or replace the air filter, #2have the carb professionally cleaned and set, and #3 replace the spark plug.
there is a piece of debris floating around in the sediment bowl of your carburetor, its lodged in the high speed jet causing it to stumble and backfire......it will most likely need a carb rebuild average repair cost on this machine is around 150 dollars at a reputable polaris dealer
seems like the carb wants to be primed, its fuel thirsty, so after sitting around for a while, turn the fuel valve on and full twist the throttle a bunch of times before you try to start it
×