Question about 2011 Xingyue Xy260T4

Open Question

Headlight bulb Hi, anybody can tell me if I need to dismantle all front part to replace a right headlight bulb? Thanks

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Replace bulb headlight


Most of the headlights do not unbolt to change bulbs. If it's a blown bulb you're trying to replace, look on the back side of the headlight housing. There should be a plug with wires attached going into the back. This plug should twist either to the right,left or up or down. Once you've twisted this plug out of the headlight housing you'll see the bulb you need to replace. Unplug the wire harness from the blown bulb and place it into the new bulb, being careful not to touch the new bulb with your bare hands as any oil or other contamination will cause these bulbs to blow as soon as they are turned on. Place the new bulb with harness back into the socket in headlight housing and twist into position.

Oct 19, 2013 | 2001 Hyundai Accent

1 Answer

How to remove,replace,front right headlight, 200' rav-4 ?


Headlight bulbs are easily replaced. At the back of the headlight assembly, under the hood, find the electrical connector and turn it counterclockwise a quarter turn, then pull out the connector and attached bulb. Remove the old bulb, and replace with your new bulb. Do not touch the glass part of bulb with your hands or fingertips- it will shorten bulb life. Put the new bulb back into place and turn it clockwise to secure it..

Nov 14, 2012 | 2000 Toyota RAV4

1 Answer

How do you change the headlight


On a Newer Vehicle you'll replace the Headlight Bulb
Open the engine compartment hood.

Locate the back of the headlight to determine the lamp and bulb type.
Decide which bulb you need to replace.
Purchase the correct bulb for your headlamp.
Behind the headlight the lamp the socket is removable.
Remove Socket then replace lamp (bulb).
Carefully re-install the socket


On Older vehicles:


Remove the screws that connect the headlamp frame to the
bracket holding the headlamp. Make certain you turn only
the screws that hold the lamp frame, not the adjusting screws.
Disconnect the electrical connector in the back of the lamp
by pulling the socket away from the headlamp with your hand.
Remove the headlight from the bracelet area and discard it.
Replace with the new headlight, making sure that it is positioned
right side up.
Plug the wire socket into the new headlight, which holding the
headlight securely.
Replace the headlight into the frame.
Place the frame onto the headlight bracket.
Reattach the screws to hold the frame and bracket in place.
Do not adjust the setting screws for the direction the headlight
shines.


At night partk in front of a wall and shine your lights on the wall
so see if the headlight shifted during installation.

Jul 14, 2012 | Cars & Trucks

1 Answer

How to remove front headlight assembly


Hi,

1 Open the RAV4's hood. Locate the back of the headlight assembly, just behind the headlight. You should see a ring-shaped plastic cover.

  • 2 Turn the locking plastic ring clockwise about 1/2 inch and it should pop off.
  • 3 Remove the rubber grommet covering back of the headlight. Simply pull it out of the headlight assembly.
  • 4 Depress the spring latch holding the bulb in place behind the headlight. This is a wire latch that looks somewhat like a bent paper clip. Press it down and move it to the side, away from the light bulb. It should come free and flip open, freeing the bulb.
  • 5 Disconnect the light bulb from the plug. Replace it with the new light bulb, and replace the latch and rubber grommet. Replace the plastic ring cover and turn your headlights on to ensure proper installation.

  • Thanks

    Aug 07, 2011 | 2003 Toyota RAV4

    1 Answer

    Do I need to remove my fairing to replace the headling bulbs?


    Hi there,

    well you can please follow the below steps -

    Remove the Fairing - 1. Unscrew all seven outer fairing fasteners using a Torx driver. These screws are located on the inner fairing near the windshield, the speakers, and the handlebar clamps.
    2. Stand in front of the motorcycle. Tilt the outer fairing toward you and hold it firmly. Reach in and disconnect the wire connectors for the headlight assembly by hand.
    3. Move the fairing to a work bench to continue the procedure.

    Change the Headlights - 1. Remove the wire harness connectors from the back of each headlight that need replacement. Turn the plastic retainer counterclockwise by hand to remove each bulb from its housing.
    2. Install the new headlight bulb or bulbs, with each bulb's wider ears on the bulb back plates oriented toward the top. Screw in the plastic retainer rings by hand.
    3. Connect the headlight wire harness connectors to the back of each headlight.
    4. Move the fairing back to the motorcycle. Reinstall the fairing, battery and seat in reverse order.
    Please post comments if you need more help or information.........

    Good Luck!!

    Thanks

    Mar 17, 2010 | 2004 Harley Davidson FLTRI Road Glide

    2 Answers

    Headlight repair on 2003 Mercedes Benz E320


    how do you change left low beam bulb on 2003 mercedes e320

    Mar 15, 2009 | 2003 Mercedes-Benz E-Class

    1 Answer

    Headlight bulb replacement


    It's easy to change the bulbs. You don't have to remove the bumper.

    To start at the left front, jack up the left front of the car, turn the wheel to the right, remove the plastic plugs and two screws holding the plastic fender liner in place (there are two pieces - loosen the front most piece) and pull it down. You will see the back of the headlight housing. Unscrew the caps and install the new bulbs. Reassemble and repeat on the other side.

    Oct 24, 2008 | Street Glow Streetglow Streetglow H894...

    1 Answer

    Burnout headlamp


    There are 2 slide type levers you can pull up on. They are on top of he headlight assembly. Pull the 2 levers and the assembly will fall out in your hands. Be sure and not touch the new bulb as it will burn out right away from the oil on your fingers.

    Aug 03, 2008 | 2001 Honda Odyssey

    1 Answer

    97 Integra headlight replacement


    no the fender stay on .just the front bumper come off

    Jul 03, 2008 | 1997 Acura Integra Type R

    2 Answers

    Replace front driver signal light bulb


    Depending on whether it is the front or the back turn indicator light will determine on what needs to be done. If it is the front turn indicator light open the hood of the car you may need to take the entire headlight out. The headlight may have screws, take the screws out then the front light will come out from the outside of the vehicle replace the burned out bulb. The bulb should snap right in and then put the headlight back in make sure you put all screws back in from the inside of the hood. Step2 If it is the back turn indicator light, go through the trunk of the vehicle. If there is a panel covering the lights you must unscrew the panel and then replace the burned out light bulb. Some panels can be folded down without removing all of the screws to access the lights. This light may not require for you to pop the entire light out you maybe able to just replace the bulb. After you have replaced it screw the panel back into place. The back light should not require the entire light to be lifted out just a simple bulb replacement. Step3 In replacing either the front or the back indicator light you must gain access to the turn signal housing which is usually in the same case as the headlight or your rear lights. It is very helpful to also get the owners manual out this will tell you exactly what type of bulbs you will need to get to replace the indicator bulb.

    May 29, 2008 | 2005 Cadillac SRX

    Not finding what you are looking for?
    2011 Xingyue Xy260T4 Logo

    Related Topics:

    18 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Xingyue Experts

    bobwin

    Level 2 Expert

    58 Answers

    Arnie Burke
    Arnie Burke

    Level 3 Expert

    4514 Answers

    Gregg Mahin
    Gregg Mahin

    Level 3 Expert

    40655 Answers

    Are you a Xingyue Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...