Question about 2005 kawasaki ZX-12R

1 Answer

2006 Kawasaki ZX-12R lost key

Lost my key to my zx12r 2006 model requires coded key What can I do to get a coded key for my zx12R 2006 model. I have phoned a couple of Kawasaki dealers and I struggle to get an answer. @

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • kawasaki Master
  • 47,780 Answers

Hi, Jj for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
lost key Kawasaki ZX 10R net
http://www.zxforums.com/forums/zx-14-forum/54258-lost-key.html
Kawasaki NINJA ZX 12R Service Manual
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

Posted on May 02, 2018

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
wd4ity
  • 4565 Answers

SOURCE: where is the live feed from ignition on Kawasaki zx12r 2006?

Get the power for you heated grips directly from the ignition switch. Use a test light to determine which wire to use. You're looking for a "switched" wire, one that goes on and off with the switch.

Posted on Oct 30, 2009

Testimonial: "Great to have someone to pick their brains cos' manuals don't always explain accurately. Keep up the good work! Maxx"

ckoira57
  • 267 Answers

SOURCE: Kawasaki ZX12R engine code?

http://www.motoverse.com/tools/vin/kawasaki.asp

Go to the above lnk and type in your entire VIN. You have only displayed 13 digits only of 17.

Posted on Apr 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 Kawasaki ZX-12R clutch will not disengage


Hi, Darnell for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
zx 12 clutch wont disengage
Clutch puller rod issues with zx12 2000 2004 FIXED
Kawasaki NINJA ZX 12R Service Manual
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Jun 01, 2017 | 2000 kawasaki ZX-12R

1 Answer

How to get to the battery


Hi, Dave sorry you can't find the first and best tool you ever bought for your Kawasaki despair not for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Taking out the battery
Kawasaki may ask What were you thinking
Trying to Swap out batteries on my zx12R 2K
Kawasaki NINJA ZX 12R Service Manual

May 04, 2016 | 2000 kawasaki ZX-12R

1 Answer

2002 Kawasaki ZX-12R how to reset the computer


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day
ecu reset KawiForums Kawasaki Motorcycle Forums
Resetting ECU Kawasaki ZX 10R net
Kawasaki NINJA ZX 12R Service Manual
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

Mar 20, 2014 | 2002 kawasaki ZX-12R

1 Answer

Will a 2005 zx12r engine fit on a 1999 zx12r frame


The engine will fit in the frame but the head support will not bolt up. The timing is also very different on these two years. The heads would have to be switched, including the cams, so unless you are a seasoned mechanic I think you should avoid this one.

Jan 24, 2014 | 2005 kawasaki ZX-12R

1 Answer

2003 Kawasaki ZX-12R paint codes


Hi, Anonymous for more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Kawasaki ZX12R Motorcycle Paint ColorRite
http://kawasakiworld.com/zx-12r/3970-paint-code-red-2000-zx12r.html
Kawasaki NINJA ZX 12R Service Manual
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

Apr 04, 2012 | 2003 kawasaki ZX-12R

1 Answer

2002 Kawasaki ZX-12R speedometer not working


Hi, Anonymous and the usual suspects are:
1. Contaminated or faulty speed sensor.
2. Faulty turn signal module.
3.. Corroded, broken or loose connector pins/sockets in the wire harness between the speedometer and the ECM or TSSM and the sensor.
4. The speedometer unit has failed.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
My Speedometer does not work Kawasaki Forum KawasakiWorld com
Speedometer not working KawiForums Kawasaki Motorcycle Forums
Kawasaki NINJA ZX 12R Service Manual
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

Mar 31, 2012 | 2002 kawasaki ZX-12R

1 Answer

2001 Kawasaki ZX-12R will not turn over


Hi, Gsf1200s before testing any electrical component in the Starting Circuit it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead-acid batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Engine Run Switch is "FAULTY" or corroded.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
5. Bank angle sensor needs a reset or is faulty.
6. FOB battery low or dead.
7. Faulty ignition switch.
8. Faulty starter button.
9. Faulty kickstand, clutch, neutral safety switch.
10. Security alarm needs a reset.
11. Starter relay, solenoid, starter motor or circuit wiring faulty.
12. Starter armature or field coils have failed.
13. Main fuse or circuit breaker may be blown or faulty.
14. Faulty ignition relay.
15. The electric starter is working but starter clutch has failed.
16. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
ZX12R wont turn over Kawasaki Forum KawasakiWorld com 2003 ZX6R Won Start 1 Engine Won Turn Over
Kawasaki Ninja ZX 12R Service Manual
OEM Parts for Kawasaki
2001 Kawasaki Ninja ZX 12R Owner Manual

Jun 12, 2011 | 2001 kawasaki ZX-12R

1 Answer

2001 Kawasaki ZX-12R misfires


Hi, Mag_andrews and the usual suspects are:
1. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a cursory reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
2. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
3. Spark plugs in bad condition or partially fouled.
4. Spark plug cables in bad condition and leaking check for spark leakage in the dark
5. Spark plug gap too close or too wide.
6. Faulty ignition coil, module, and or sensor.
7. Loose, dirty, or corroded ignition module connector at crankcase.
8. Faulty CKP or CMP, MAP, ETS, ATS, TPS, O2 sensor.
9. Dirty air filter.
10. Intake air leak.
11. Water, dirt, or rust in the fuel system.
12. Carburetor contaminated, sticky float, plugged jets.
13. Carburetor has oil in the bowl due to excessive oil in pre-mix.
14. Carburetor vacuum diaphragm torn, cracked, not seated or installed improperly.
15. Multiple carburetors out of sync.
16. Fuel filter clogged.
17. Old or contaminated fuel.
18. Fuel tank vent system plugged or carb vent line closed off.
19. Gas cap diaphragm valve faulty.
20. Vacuum line from intake manifold to fuel valve is broken, cracked, pinched, or missing.
21. Carburetor controls misadjusted.
22. Incorrect valve timing.
23. Valve springs floating, weak, or broken.
24. Damaged intake or exhaust valve.
25. Incompatible performance parts.
26. The control module may be in "LIMP" mode
27. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
2001 8k Misfire Stumble Not Fuel Pump Help Kawasaki Forum KawasakiWorld com
Strange Misfiring Fault ZX12R Two Coils Don Fire ZX12R ZONE com
Kawasaki Ninja ZX 12R Service Manual
OEM Parts for Kawasaki
2001 Kawasaki Ninja ZX 12R Owner Manual

Nov 28, 2010 | 2001 kawasaki ZX-12R

1 Answer

Oil Change


To change oil remove drain plug under bike, while oil is draining into pan remove left lower fairing and remove oil filter from front of engine. Replace plug and filter and refill, replace fairing.

Apr 27, 2010 | 2003 kawasaki ZX-12R

1 Answer

2004 Kawasaki ZX-12R IAT sensor location


Hi, Dmaher1100 for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
2004 Kawasaki ZX 12R IAT sensor location Google Search
Inlet air temp sensor code 13 fault Kawasaki ZX 10R net
Kawasaki NINJA ZX 12R Service Manual
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

Mar 19, 2010 | 2004 kawasaki ZX-12R

Not finding what you are looking for?
2005 kawasaki ZX-12R Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4821 Answers

yadayada
yadayada

Level 3 Expert

78936 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...