Question about Suzuki Motorcycles

1 Answer

Easiest way to deep clean carbs - Suzuki Motorcycles

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    Visited the website for 3 consecutive days.


    An expert who has answered 20 questions.

  • Expert
  • 117 Answers

Obviously pull them. Take them apart. would be easier to know what carb you are talking about. I will use a Keihin PWK for example. Use Berrymans carb cleaner. Some cleaners are like water. Remove all jets and air/ fuel screw. spray everything and look through every hole of every jet. Blow it out with compressed air. Be sure to not lose the parts. Stay organized. Use a Q-tip with very small amount of Mother's aluminum polish and stick it in the needle seat and spin it. It will clean and shine that puppy big time. Clean the area with carb cleaner to get polish out. Make sure when you disassembled that you counted your turns on all of your idle, air screw adjustments. Reassemble when all is clean. Obviously I am hitting very basics here. Be sure to not over tighten the bowl screws. Good luck.

Posted on Apr 21, 2014

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to clean deep fryer

Hi There Best way To Clean Bella Deep Fryers Is To Use A Cleaning Product Called (Fry Clean) Its a Non Toxic Washing Liquid You Heat Up And Pour Out, Easiest And Safest Way Avaliable

Aug 01, 2014 | Bella Kitchen Appliances - Others

1 Answer

Im looking to buy a 1980 suzuki cavalcade bike runs but it sat for 4 months the salesman says he thinks it doesnt get up to speed as quick it should is it the carbs

that is a partial clean for the carb. the best way is to get a carb rebuild kit and "deep clean" and replace all the gaskets. when doing this, you may find other problems such as broken parts inside the carb.

Dec 17, 2012 | Suzuki Motorcycles

1 Answer

Craftman blower/ changed the fuel lines/ cleaned the filters/ still no fuel in to the primer

Clean your carb and make sure your needle and seat are also clean and the screen inside carb at inlet of fuel, also the primer has a check valve inside it that gums up, try to spray carb clean or sea foams deep creep I like it seems to loosen up the check valve and remember normally fuel line with filter goes on nipple at pump side of carb and other nipple goes to suction side of primer and other nipple goes to tank as a return line as you prime it, this causes fuel to be sucked thru carb and back to tank 2StrokeJim

May 18, 2011 | Craftsman 25cc Gas Line Trimmer

1 Answer

My Honda EX 650 portable generator had brown colored fuel in it and a lot of rusty stuff in the tank. I plan to recoat the tank with something like POR 15. So far I took the tank out, hooked up a platic...

Do a deep clean of the fuel ;lines,carb,filter and tank.donot coat the tank inside,if is too rusty try find a used one and also change the spark plug and do ahead clean.

Nov 02, 2010 | Honda 3000 Watt Portable Generator

1 Answer

Rear cylinder carb on 85 xv700 virago wont accept gas. was fine when put up last fall.can blow in supply line of front carb but not back carb.

The float needle valve has probably stuck in the closed position, probably caused by fuel gum. Worst case scenario is to take the carb off and clean it. Easiest scenario is to remove the fuel line and squirt carb cleaner into the valve area. Leave it overnight. Sometimes carb cleaner and tapping the carb will move it. Low pressure air can help. Once it's clear add some injector / carb cleaner to a tank of fresh fuel ( double or tripple the normal doseage won't hurt.)

Mar 23, 2010 | 1985 Yamaha XJ 700 X Maxim

2 Answers

Have an 86 yamaha maxim 700 dont think the carbs are original and need parts carbs are off and have carb no.

Well, easiest is go to wrecker get the orig carb and installed it. Can also Google the part and see who has it else go to eBay and scour, perhaps somebody somewhere has them.

Feb 04, 2010 | 1985 Yamaha XJ 700 S Maxim

1 Answer

My 1974 2.5 briggs&stratton edger will not start It has a new plug oil change is done new belt and blade I cleaned the gas tank and carb

Check to see if you have a spark, coils do not last forever. If you just cleaned the bowl of the carb and it has spark you need to deep clean the carb something is clogged in the fuel system. There is not much to these small engines spark and fuel if your missing one, no start. Yours is pretty old but I bet it is something simple, if I had it in my garage it would be running, as long as the compression is good and it is not burned up.

Nov 24, 2009 | Home

1 Answer

Clean Carbs

Internally or externally? If you mean inside then you can use lucas, shevron techron, or deep creep (from sea foam). It is slow working but it will clean the inside of your fuel system. If you have some type of blockage then you may need to pull the carbuator off.

May 13, 2009 | 2000 Yamaha YZF-R6

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts


Level 3 Expert

75822 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides