chk mesh of ring and starter bendix. If teeth don't mesh right, the start will put pressure on the ring teeth improperly stressing . Teeth should pattern like a ring and pinion . Wear in center of each tooth, not on yje ends of the teeth.
i was on my kymco scooter the other day and it suddenly made a loud rattling noise and their was no...
(More)
i was on my kymco scooter the other day and it suddenly made a loud rattling noise and their was no power going to the revs. engine starts but makes a bad noise especially when i rev it please help
followed instructions per manual but coolant will not drain. end of drain plug not even wet when...
(More)
followed instructions per manual but coolant will not drain. end of drain plug not even wet when removed. suspect air lock because reserve reservoir was empty. is it possible to resolve this without stripping down to engine and frame to remove thermostat.