Question about kawasaki Zephyr 750 Motorcycles

1 Answer

Gas in oil

Gas is mixing with oil

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

There is no overflow for the carbs and are vacuum fed, it could possibly be the fuel tap is letting fuel thru to the carbs when the bike is not running and going into the cylinders. good idea to take the fuel line off the tap and see if it is letting petrol thru. if so, a new gasket and seal set should cure the problem. otherwise a float in one of the carbs is maybe stuck open.

Posted on May 17, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a poulan wild thing and the oil bar compartment has gas in it


I would drain the oil and gas or whatever is in it. I would also drain the 2 cycle mix from the gas tank and start with a fresh gas and oil mix and fresh bar oil. The mix for the Poulan Wildthing is a 40:1 mix.

You are definitely going to smell gas when using any chain saw.

Oct 28, 2014 | Poulan 18" Wild Thing Chainsaw

1 Answer

Do I mix the oil and gas together and pour it in the gas tank or do I pour the gas in the tank and the waverunner mix's the oil and gas together?


Mix the oil and gas together first.
Or you can add some gas into tank, then add some oil, then add more gas, then bit more oil ... so oil-gas mixture is uniform.

Jun 24, 2012 | Boating

2 Answers

What kind of gas


Regular unleaded gas mixed with 2 cycle oil. (You need to check your model for mixture ratio but 30:1 (thirty parts gas to one part oil mix) is usually a good place to start) You can find mixing instructions on the back of the 2 cycle oil container

Dec 08, 2010 | Garden

2 Answers

I have a techumseh snow blower 5.5 engine. I need to know what type of fuel it needs. It says on the outside something about a 50:1 oil gas mix and lists some types of oils. Where can I get these oils,...


go to your hardware store and ask for some 2 cycle 50:1 oil, mix that with a gallon of gas and you're good to go. Before you mix, make sure that you read the oil container for it's recommendations! You can purchase a small container of oil that is all measured for 1 gallon of gas

Feb 10, 2010 | Garden

2 Answers

Need to know oil to gas mix ratio for Craftsman 32cc, 360 cfm, 170 mph blower vac? Can someone provide ratio?


40:1 is the standard mix. Go buy one of the little containers ( 3.2 ounces) of 2-cycle oil and mix it with a gallon of gas in an approved container (like a gas can). How you mix it is, pour some gas in the container...about 1/4 of the gallon, then pour in the oil, mix well, by shaking the can then add the remaining gasoline and PRESTO, you have a 40:1 mix!

Nov 08, 2009 | Garden

1 Answer

My B&S Yard Machine shoots out white smoke it also leaks out oil and gas mixed


If this is a 4 cycle mower (seperate places for gas and oil) and you are using a oil and gas mix as I am reading from your post that is your problem. When you use a gas&oil mix in a 4 cycle you get smoke and if fouls your spark plug. Also be more specific where the oil and gas mixed is leaking from. I SUGGEST THAT YOU DRAIN OUT THE GAS&OIL MIX AND CLEAN THE SPARK PLUG OR REPLACE AND FILL WITH STRAIGHT GAS AND SEE HOW IT RUNS.

Good luck
roundo4

Sep 03, 2009 | Mtd 22" Yard Machine Push Mower

4 Answers

I guess he needs to know what kind of oil he needs also


you shouldn't need to mix oil with gas on a four cycle engine. this is for two strokes.

Aug 23, 2009 | Garden

1 Answer

11A-418A729 - straight gasoline or gas/oil mix


If it has an oil stick, it is sraight gas. No oil stick to check oil then, gas/oil mix needed.

Mike

Jul 10, 2009 | Mtd 22" Yard Machine Push Mower

2 Answers

I dont have the manual and Im not sure what ype of oil I should put on this chain saw. On the left The nob sais oil (which kind?) and on the right side it sais oil/gas mix (which kind?) what do i put on...


The Left knob needs chain oil. Available in most hardware stores. The right is gas mixed with 2 stroke motor oil. Usually a 50:1 mix. Ie. 50 parts gas to 1 part oil. 2 stroke oil comes with a built in measuring tool and directions printed on the bottle.

Jun 03, 2009 | Garden

1 Answer

Does this model take a gas oil mix?


yes it does require a mix. go to any lawn and garden store and get the small bottle of oil that u mix with one gallon of gasoline.

Apr 15, 2009 | Garden

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...