Question about Motorcycles

Open Question

My piaggio x8 125 will not start nothing from the starter button and indicators won't work but all other electrics do, any ideas on the problem?

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
riverotter
  • 58 Answers

SOURCE: No Horn

sounds like you have a dirty or missing ground connection or a fuse that's bad. the ground problem is usually best left to a technician (it can get pretty involved, but the fuse is a quick check and fix you can look at it and see if it is blown and get a new one at any auto parts store.

Posted on Feb 21, 2009

Ad
  • 2 Answers

SOURCE: Bike won't start. Battery is good. Lights

Is your kill switch on it is located on right side of handbar small red off-on switch

Posted on Jun 05, 2011

landstar377
  • 66 Answers

SOURCE: my bike won't start(lights light ,horn works

Hey, When that happened to me I took the bike half apart and it ended up being the Kill switch. Try rocking it back and forth also if you have contact cleaner flood the switch and let it dry then give it a light spray of wd-40. also check the start switch to be sure it is making contact,bike is in Neutral and the kick stand switch is also working.

Posted on Jul 08, 2011

czaa
  • 4536 Answers

SOURCE: piaggio mp3 125cc motorcycle, won't start and emits high-pitched "whining" noise, last garage-serviced October 2012

chec alternator for health--sounds like bearings are bad--du u gut a repair book for that model--git one online or checout library sec 629--its a basic component so othr manual can help u

Posted on Feb 25, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 Piaggio Fly 125 will not turn over


Hi, Gary before testing any electrical component in the Starting Circuit it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead-acid batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Engine Run Switch is "FAULTY" or corroded.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
5. Bank angle sensor needs a reset or is faulty.
6. FOB battery low or dead.
7. Faulty ignition switch.
8. Faulty starter button.
9. Faulty kickstand, clutch, neutral safety switch.
10. Security alarm needs a reset.
11. Starter relay, solenoid, starter motor or circuit wiring faulty.
12. Starter armature or field coils have failed.
13. Main fuse or circuit breaker may be blown or faulty.
14. Faulty ignition relay.
15. The electric starter is working but starter clutch has failed.
16. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
ScooterCommunity
http://modernvespa.com/forum/wiki--won-t-start-diagnosis-for-beginners
Piaggio Fly 150 4T Workshop Manual
Piaggio FLY 125 2005 Parts
PIAGGIO X9 Evolution 125 Owner Manual

Dec 10, 2017 | 2008 Piaggio Fly 125

1 Answer

2009 Piaggio Zip 50 will not turn over


Hi, Anonymous before testing any electrical component in the Starting Circuit it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead-acid batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
4. Bank angle sensor needs a reset or is faulty.
5. FOB battery low or dead.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand, clutch, neutral safety switch.
9. Security alarm needs a reset.
10. Starter relay, solenoid, starter motor or circuit wiring faulty.
11. Starter armature or field coils have failed.
12. Main fuse or circuit breaker may be blown or faulty.
13. Faulty ignition relay.
14. The electric starter is working but starter clutch has failed.
15. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
My Piaggio 50 Won start
Scooter Troubleshooting Scooter won start All about Scooters
PIAGGIO TYPHOON 50 2T 4T BIKE WORKSHOP SERVICE REPAIR MANUAL Download... $15
https://www.motorcyclespareparts.eu/piaggio-parts/scooters/zip-50-2t-2009.aspx
PIAGGIO ZIP 50 2T User Manual

Nov 07, 2017 | 2009 Piaggio Fly 50

1 Answer

Not starting


You need to give us more information. Are you Kick Starting or using an Electric Starter? Is the Electric Starter engaging and turning over? Is there smoke burping out of the tail pipe when trying to start it?

From your info you might want to check all your fuses. There might be a critical fuse burned out.

Jul 26, 2016 | 2011 Piaggio Fly 50

1 Answer

Press starter button and nothing happens


How familiar are you with the Piaggio MP3 ?

For the electric starter to operate, not only does the ignition key have to be turned to the on position AND the ENGINE STOP SWITCH
4c5a26a4-8f3e-4f2a-92bc-1dd0107fdb36.jpg

be in the RUN position .....

BUT you must also APPLY REASONABLE PRESSURE to either of the BRAKE LEVERS.

On another note, the MP3 has an IMMOBILISER
There is a TRANSPONDER CHIP in the IGNITION KEY that is detected by the bike's "security system" and the CODE in it is read and compared to the one stored on-board.

I've never tried to start a MP3 with a key that has the wrong code or the transponder chip missing, BUT, if it is the same as my car (Ford Mondeo) the STARTER MOTOR DOES NOT TURN - NOT EVEN A CLICK

Mar 27, 2014 | 2010 Piaggio MP3 125ie

1 Answer

Piaggio X8 No longer starting.


hi david.
If there is a clicking sound when pressing the starter button that is indicative of a bad starter relay, a fairly common problem problem with Aprilia scooters.
sounds like the starter to me, if you pull off your belt case you should be able to turn the engine from there to make sure its not siezed, if its pulling more than 5amps then the starter motor is likely siezed, dont keep trying it as this could result in the wiring overheating, 0.6 ohms is a decent reading for a ground connection, if you connect your volt meter + from the battery + connection to the starter + connection with volts selected try to start it, the reading you will get will be the voltage being lost between the battery and the starter it should be low, eg less than 1 volt dropped, if not look for poor connections.
or try this link.


How to Troubleshoot Your Piaggio
or this one.
piaggio x8 starting problems Google Search

Dec 10, 2017 | Motorcycles

1 Answer

Piaggio zip 125 electrical


Hi, Bilywalker before testing any electrical component in the Starting System it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead acid batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
4. Bank angle sensor needs a reset or is faulty.
5. FOB battery low or dead.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand or clutch pull in switch/sensor.
9. Security alarm needs a reset.
10. Starter relay, solenoid, starter have failed or circuit wiring faulty.
11. Starter armature or field coils have failed.
12. Main fuse or circuit breaker may be blown or faulty.
13. The electric starter is working but starter clutch has failed.
14. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Troubleshooting
Scooter Troubleshooting Scooter won start All about Scooters
Piaggio Fly 150 4T Workshop Manual
https://www.oemmotorparts.com/oem2.asp?M=piaggio
PIAGGIO MP3 125 User Manual

May 28, 2017 | Piaggio Motorcycles

1 Answer

I have a 09 Piaggio Fly 50. When I bought it, the battery was run down from lack of use and extreme cold (I used to live in the Rockies). I could never start it from the starter button, but always with a...


Hi, Jkranowitz before testing any electrical component in the Starter Circuit it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test because your battery may have 12.5 volts or more but little or zero amps causing the battery to be faulty and must be replaced, especially "AGM" batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
4. Bank angle sensor needs a reset or is faulty.
5. FOB battery low or dead.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand or clutch pull in switch/sensor.
9. Security alarm needs a reset.
10. Starter relay, solenoid or starter circuit wiring faulty.
11. Starter armature or field coils have failed.
12. Main fuse or circuit breaker may be blown or faulty.
13. The electric starter is working but starter clutch has failed.
14. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
My Piaggio 50 Won start
How to Troubleshoot Your Piaggio
PIAGGIO MSS Fly 50 4T Workshop Manual
2009 Piaggio Fly 50
http://motorscooterguide.net/Piaggio/Fly_Series/Fly-50-and-150.html

Apr 12, 2017 | 2011 Piaggio Fly 50

2 Answers

1982 Suzuki GS 650GL won't start. I've purchased a


Well the good news is the click indicates the switch is working, when you press the switch the 2poles on the solenoide are joined together alowing the current to the starter,bridge the wires at the solenoide this should put power directly to the starter you wont need to press the start switch, if the engine does not turn over check the connections to both the battery and starter motor,

Jul 25, 2011 | 1982 Suzuki Gs 550 L

1 Answer

I have a piaggio typhoon 50 cc (1999) it starts on the kickstart and ticks over but dies when you try and rev it,It wont fire on the electric start but turns over fine.The carb is clean and the fuel...


Hi, Steviethemas before testing any electrical component in the Starter Circuit it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test because your battery may have 12.5 volts or more but little or zero amps causing the battery to be faulty and must be replaced, especially "AGM" batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
4. Bank angle sensor needs a reset or is faulty.
5. FOB battery low or dead.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand or clutch pull in switch/sensor.
9. Security alarm needs a reset.
10. Starter relay, solenoid, starter have failed or circuit wiring faulty.
11. Starter armature or field coils have failed.
12. Main fuse or circuit breaker may be blown or faulty.
13. The electric starter is working but starter clutch has failed.
14. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
https://www.reddit.com/r/scooters/comments/3d1r2j/help_please_piaggio_typhoon_wont_start
Scooter Troubleshooting Scooter won start All about Scooters
http://www.49ccscoot.com/manuals/Piaggio_Tech_Manual.pdf
https://www.oemmotorparts.com/oem2.asp?M=piaggio
PIAGGIO ZIP 50 2T User Manual

May 16, 2017 | 2005 Piaggio Typhoon 50

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

77499 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...