Question about Yamaha WR 426 F Motorcycles

1 Answer

Wiring diagram My head light doesn't work my indercators don't work I'm not sure where the wires go for them thing and I need a wiring diagram to help me out for a road worthy

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Yamaha Master
  • 41,663 Answers

Hi, Anonymous if your headlight is not working, only one beam works, keeps burning out, blinking, or is dim the first thing you need to check is the headlight bulb for damaged filaments then check your light circuit fuse, then check your head light bulb socket ground wire for a clean tight connection, that being said the usual suspects are:
1. Faulty ground or power supply wire to headlight bulb socket.
2. Worn down solder contacts or loose fit of the bulb base in the socket due to vibration.
3. Worn, chaffed, or broken wires in the light circuit.
4. Corroded, broken, or loose pins/sockets in wire connectors.
5. Faulty hi/lo beam switch.
6. Faulty ignition switch.
7. Fuse is good but no continuity on both sides.
8. Faulty wiring between battery positive and headlight bulb socket.
9. Weak charging alternator/generator.
10. Faulty voltage regulator/rectifier ground or overcharging.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
wr426 Wiring diagram Google Search
Wiring Diagram
YAMAHA WR426F Owner Service Manual
OEM parts for Yamaha
YAMAHA WR450F Owner Manual

Posted on Dec 06, 2016

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
tellme2
  • 137 Answers

SOURCE: Wiring Diagram

hi there ,,havent tried these guys yet m8 ,but try the downloadable wiring diagrams ,,if they do them 4 your bike,, try this www.repairmanual.com this is a downloadable manual site,, cheers

Posted on Feb 27, 2009

  • 112 Answers

SOURCE: wiring diagram for bike

You can go to your local dealer and they usally will copy it out of ther service manuel for you.When you say passing lights do you mean highway lights?

Posted on Mar 29, 2009

  • 10 Answers

SOURCE: NEED A WIRING DIAGRAM FOR 2008 KLR 650

http://www.bigcee.com/faq/KLR650-color-wiring-diagram.jpg

Posted on Jun 14, 2009

CUTTER4LIFE
  • 15 Answers

SOURCE: Wiring diagram for a chopped '82 Yamaha

CHECK THIS SITE OUT ITS RIGHT UP YOUR ALLEY
http://viragotechforum.com/phpBB/viewtopic.php?t=6563&highlight=geo+wiring+cycom

Posted on Jun 19, 2009

  • 302 Answers

SOURCE: I need a wiring diagram for my 175 cc Kawasaki KE

A service manual is a very valuable tool, esp. with a bike of that age. Dealer, mfr. and clymer books are sources for that. Meantime, the public library may have your info in the 646 stacks of reference section.

Not sure about 2nd plug. If its wired, then its to insure you get ignition in the cylinder. Some mfr's did that for a while.

Posted on Oct 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

500 Suzuki Vinson 2007 Need to know how to find power source to dash indercator n for neutral. And to send power to coil to start motor. Please help stuck.


You will need a wiring diagram to correctly locate and determine which wire. Generally, the neutral switch is mounted on the top or front of the gear case. When in neutral, the switch is closed to send power to the dash indicator to let you know its in neutral. When in gear, the switch is "open" so the light will be off. If you find the switch, you can join the 2 wires together and that should light the neutral indicator and provide power to the starter. disconnect the join when the engine starts. It should be OK for an emergency to get home.

Jun 21, 2015 | Suzuki Motorcycles

1 Answer

2001 Kawasaki VN 800 Vulcan Drifter wiring diagram


Hi, Anonymous if your headlight is not working, only one beam works, keeps burning out, blinking, dim or surges from bright to dim to bright the first thing you need to check is the headlight bulb for damaged filaments then check your light circuit fuse, then check your head light bulb socket ground wire for a clean tight connection, that being said the usual suspects are:
1. Faulty ground or power supply wire to headlight bulb socket.
2. Worn down solder contacts or loose fit of the bulb base in the socket due to vibration.
3. Worn, chaffed, or broken wires in the light circuit.
4. Corroded, broken, or loose pins/sockets in wire connectors.
5. Faulty hi/lo beam switch.
6. Faulty ignition switch.
7. Fuse is good but no continuity on both sides.
8. Faulty headlight relay.
9. Faulty wiring between battery positive and headlight bulb socket.
10. Weak charging alternator/generator/lighting coil.
11. Faulty voltage regulator/rectifier ground or overcharging.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
2001 Kawasaki VN 800 Vulcan Drifter wiring diagram Google Search
Kawasaki Motorcycle Wiring Diagrams
KAWASAKI VN800 Service Manual
OEM Parts for Kawasaki
Kawasaki VN800 Owner Manual

Jul 08, 2017 | 2001 kawasaki VN 800 Vulcan Drifter

1 Answer

1993 isuzu NPR no start


It sure would help. In fact, it may be necessary: check for a repair manual for your car at local libraries, or buy one, or register for free at autozone.com, listing make, model, year, and engine size. Their site has repair guides and wiring diagrams-although maybe not complete.
One thing I can help you with: the key switch would turn on the warning lights, and would make the wipers have power to the fuse panel. Check for an ignition relay right around the fuse panel. Some models have the ignition on-wire turn on the ignition relay to send power to some fuses of the fuse panel.
Now the headlights and tail lights do not go through the ignition switch. The headlight switch gets power from either a maxi-fuse or a fuse link just off the battery, and is or should be hot at all times, unlike the accessories which only have power when the key is on.
Like you, I don\'t know how your Isuzu is wired, just kind of stabbing in the dark. You really do need a wiring diagram. Sorry, can\'t help you, so I\'ll just shut up, but good luck with it.

Jul 02, 2013 | Cars & Trucks

1 Answer

The bike start switch doesnt work how do i fix it


Without a proper electrical diagram of your bike in front of me, it is impossible to help you on this one. However, I did a search online and found one that I will refer to and hope it is accurate:

http://www.sohc4.net/index.php?title=CB500#Wiring_Diagrams

According to the diagram, the red/yellow wire should attach to a terminal on the switch itself. However, the diagram doesn't tell me HOW it attaches. Your best bet is to go to your local bike junkyard and look at another CB500 to see how the wires attach to the button.

When you touch the red/yellow to the handlebar you are bypassing the starter switch, which is why the starter will crank over. Don't do that. :-)

The piece of metal that fell out of the switch is probably a wire clip to hold the wiring in place so it doesn't get pinched when the switch housing is clamped together. There should be a very small post with a threaded hole in it that the screw, which is probably lost now, threads into through the hole in the plate

Parts For Porsche Panamera

Jun 15, 2012 | Honda Motorcycles

1 Answer

Why doesn't the head lights work?


look at your fuses one may have popped. the little wire in the fuse will be broken. Check the diagram in the fuse box to figure out which one to check.

Mar 29, 2012 | 2002 Oldsmobile Bravada

1 Answer

Hello, I have a 85' buick regal and I'm having


This is a tough one with out being able to see the wiring. i will enclose a wiring diagram for the complete lighting system.
You will need to locate the correct wirng and make sure its going to the correct light. Most times a bad ground wire will make the light do funny things like your car is doing. With the diagram i enclose locate the ground wire to the rear lights and make sure ground is good, even if you must cut old ground out and run a new ground to a good metal ground.
3_18_2012_3_37_44_pm.gif

Mar 18, 2012 | 1985 Buick Regal

1 Answer

Brake lights don't work on my 2010 FXDWG and my right turn signal doesn't work either. There is a key icon on my speedo that is on in red.


Hi Ed, always check fuses and bulbs first for broken filaments. Then check the connection at the rear fender wiring harness, inspect for corroded, broken or loose pins. Use a dab of dielectric grease and repair as necessary. Check your brake relay if you have one , check your brake light switches for continuity, some models rear turn signals were single filament bulbs only, no running light. If all else fails get out your test light and start tracking the power wire from the harness connection. You could have a faulty turn signal module or a bad turn signal button/switch, remove it from the switch housing and check for continuity, check your wiring and connections from the turn signal switch to the turn signal module with a testlite. Make sure all wires are not worn or pinched and connector pins are not corroded, broken, or loose. For a free wiring diagram please visit the website below. You may also need an alarm reset. Harley Davidson Wiring Diagrams and Schematics
Set Change Override Transport Harley Security Alarm PIN Code No Key Fob...

Oct 07, 2011 | Harley Davidson FXDWG - FXDWGI Dyna Wide...

1 Answer

I need the wiring diagram for lights in the living space. the lights in the living room don't work. the bulbs are new


Are you talking about a camper that is mounted in the truck bed? A truck doesn't have a living room. If your talking about the interior light check you dash board light dimmer control to make sure it hasn't been turned off.

May 15, 2011 | 1984 Ford F 350

2 Answers

Rear defogger doesn't work even though dash lite works


Couple of things to check - first look for any scratches through lines, a couple of scratches will not let power run from side to side. The other is -> with a test light or voltage meter -> put (+)cable of meter/light to small electrical connector that attached to your window and (-) cable to a good ground (metal) light will come on/meter should read voltage there.

Mar 02, 2011 | 1998 Chevrolet Cavalier

1 Answer

No parking lights.. Head lights and brake lights work. No power getting to parking light bulbs. All fuses in panel test good. Need good wiring diagram to chase wires. Any suggestions on problem or where...


You can try an internet search for the wiring diagram. No power to all the parking lights? Then probably the light switch. Make sure you have power to both sides of the fuse. If not the either wiring from the switch or the switch itself. Good luck.

Aug 16, 2010 | 1982 Chevrolet El Camino

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...