Check the brake caliper pistons are free ! push pads back and press lever to see they move back against the pads , also are the pads worn out as they will over heat , check this and are you using 60 % front and 40 % brake pressure when riding ?
SOURCE: location of wiring harness for lights on a Yamaha Venture motorcy
best place to start is behind your back light then follow wires to a place where you want to splice in your trailer socket
SOURCE: when i pull on my front brake lever it comes all
you will need to check the pads are not worn out then bleed the brake lines, by pumping the lever then opening the bleed valves on the calipers, keep doing this until pressure come back, and keep topping up the master cylnder reserve so it doesnt **** more air in.
101 views
Usually answered in minutes!
×