Question about 2004 Yamaha YZF-R1

1 Answer

Shift light I want to set the shift light,tell me how pls

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Yamaha Master
  • 40,752 Answers

Hi, Anonymous for more information about your question and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
How to Adjust the Display settings brightness and shift indicator light on...
2005 Yamaha R1 Shift Light Adjustment
2004 2005 Yamaha YZF R1 Service Manual R1 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Posted on Aug 18, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1992 Subaru legacy wagon will not shift up from first gear. it is an AT.


run the fault but all you describe is operated from the VSS sensor ( vehicle speed sensor)
it tells the cruise control the vehicle speed , tells the TCM the vehicle speed so that ratios can be changed, activates the speedo,and will report with a check engine light to report a transmission problem
run the fault codes first

Mar 05, 2017 | Subaru Cars & Trucks

1 Answer

Why does my Chevy s-10 shift so quickly through gears?


Most of the shift lights are set to shift for optimal gas mileage.

May 17, 2014 | 1993 Chevrolet S-10

2 Answers

How i can unlock shift


If you are printing all CAPS then it is the Caps Locks key. It is located just above the shift key on the left side of the keyboard. There should also be a light on the laptop indicating the Caps lock is on.

Hope this helps

Jun 11, 2012 | HP Computers & Internet

2 Answers

My 1993 Gmc Sierra 2500 automatic first gear shifts hard also from park to drive others gears are smooth i have overdrive


The gear shift lever indicators tell you what gear you have an automatic transmission in on your vehicle. The shift solenoid tells the transmission when to shift gears and what gear to shift into. Newer model automatic transmissions have electronic shift solenoids that are activated and change gears based on the speed the vehicle is traveling. Troubleshooting either one of these transmission components is relatively easy if you know a little about automobile mechanics. With the right tools, you can determine whether the transmission shift solenoid is having a problem. Gear shift indicator problems can be determined simply by moving the gears into their designated position.
Transmission Shift Solenoid
  • 1 Raise each corner of the vehicle up with the car jack and place jack stands under the frame. Make sure the car is raised high enough so you can work under the car freely.
  • 2 Slide the drain pan under the transmission fluid drain plug. Remove the drain plug with a ratchet and socket, and let all the fluid drain out of the transmission. Remove the transmission pan bolts with a ratchet and socket. Pull the pan away from the bottom of the transmission, revealing the transmission shift solenoid.
  • 3 Wipe off the shift solenoid with a shop towel. Disconnect one of the two plugs that attaches to the shift solenoid. Turn the knob on the volt meter to the ohms setting, so resistance can be measured. Set the volt meter on 200.
  • 4 Take the black lead of the volt meter and touch the negative battery terminal wire. Take the red lead of volt meter and slide the tip into the terminal plug you just disconnected from the shift solenoid. Look at the reading you get on the digital display of your volt meter. Determine if the reading is between 12 and 25. Readings below 12 or above 25 tell you that the shift solenoid is not working. Reattach the plug to the shift solenoid and pull the second plug attached to the solenoid. Perform the same procedures on this plug wire. Replace the transmission shift solenoid after determining it is bad.
Gear Shift Indicator
  • 1 Move the gear shift into the desired gear. Look at the gear labels and the arrow, or other indicator, to see if the gear shift indicator lines up with the selected gear.
  • 2 Move the gear lever to another gear and look to see if the indicator lines up with the selected gear. Misalignment of the arrow will tell you if there is a problem. Moving the gear shift to "neutral" but having the indicator show the transmission is in "drive" tells you the gear shift indicator is not working properly.
  • 3 Try each gear position to determine how much misalignment is in the indicator. Slide under the car and check for a loose gear shift cable. Check all the gear shift cable connections to ensure they are all tight and are not missing. Tighten any loose gear shift cable clamps or bolts. Replace the gear shift cable if you find that this is causing the misalignment with the gear shift indicator.

Feb 02, 2012 | 1993 GMC Sierra

3 Answers

TRANSMISSION WILL NOT SHIFT OUT OF PARK


replace the shift lock solenoid next to the shift cable inside the vehicle
A GM dealer item only I am afraid to tell you

Jun 26, 2011 | Chevrolet 2500 Cars & Trucks

1 Answer

1991 Camry won't shift out of P, brake lights out


that fact that the brake light's don't work is why it won't shift out of park, there is a sensior on the brake pedal, it could be faulty or the fuse the owners manual should tell u where the fuse box is, or if u don't have it call a deller and thay can tell u!

Jun 04, 2010 | 1991 Toyota Camry

1 Answer

Hello pls tell me how to refresh my fx-115es?


To clear the display screen press the [Shift] (AC) key sequence buttons
If you want the results to be displayed as fractions, set the MODE to MthIO
Press [SHIFT][MODE][1:MthIO]

May 05, 2010 | Casio FX-115ES Scientific Calculator

3 Answers

96 ford tuarus that has AX4N transmission wont shift out of first gear, how many shift solenoids are in this transmission and how hard are they to change


You may want to change the vehicle speed sensor first. Is your speedometer working? The shift solenoids are inside the side cover of the transmission and it's quite a job to get that cover off, you practically have to take the trans out of the car. Are you getting a "check engine" light there may be a code in the computer that will tell you what is going on. If one of those solenoids fail it should trigger a "check engine" light, the solenoids are usually pretty trouble free as a rule. I'm not sure on that transmission, but I think there are two shift solenoids, but there is also a "torque converter clutch solenoid". Also, if you can get it to a trany shop they can put a scan tool on your car and tell you exactly what's happening. Have you tried manually shifting the car? Pull it down into 1 then manually shift it up, see if it will shift that way.

Mar 20, 2010 | 1996 Ford Taurus

1 Answer

Arrow light flashing while in drive. this light comes on when shifted into L4 what is this telling me?


I'd guess you have the computer telling when to shift for best fuel economy, right? Then I'd guess an up arrow would be telling you you are going to fast for that low of a gear and to shift.

Dec 07, 2009 | 2001 Volvo S40

1 Answer

Shift lever light?


Hi,

I am assuming that you are referring to the PRNDL / gear shift indicator for Automatic Column Shifts, if so, then yes. Lights to provide back illumination for the PRNDL are normally wired together with the other dashboard/parklights. They are smaller than the standard dashboard bulbs.

BTW, I was made to understand that TJs with column shift automatic are very rare, my compliments.

Hope this be of initial help/idea. Pls post back if I have not addressed your concern, how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Jul 13, 2008 | 1997 Jeep Wrangler

Not finding what you are looking for?
2004 Yamaha YZF-R1 Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...