Question about Suzuki Motorcycles

Open Question

What is the spark plug gap specs for a 1995 suzuki intruder 1400

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
polarcycle
  • 1392 Answers

SOURCE: plugs are black aft.mrkt pipes bike runs good

Factory recommended plugs are the best. Ask your local dealer, and he will give you the correct plugs. If you are fouling plugs, look for a too rich mixture, or carbs flooding.

Posted on Jun 06, 2009

Ad
emissionwiz
  • 80637 Answers

SOURCE: how many spark plugs does a suzuki intruder 1400

under the gas tank, remove the gas tank to replace them, it has 2 plugs

Posted on Sep 28, 2009

  • 17 Answers

SOURCE: My suzuki intruder is missing backfiring on the

Did you sync the two carbs? If not the rear may be getting all the gas from the rear carb and none to the front. Twist throttle engine off and see if front carb cable is pulling the carb open.
Also unscrew the spark plug boot from the front spark plug wire and trim 1/8th inch off the wire and screw the boot back in. The plug wire end may be corroded on that wire.

Posted on Feb 08, 2010

  • 185 Answers

SOURCE: What is the spark plug gap for my 1987 suzuki 700

Spark plug gap is something that people will have different opinions, set them as per the manual. If you are buying new ones, they should be set as per the manufacturers specification and should not need adjustment. Never bang the plug against something to change the gap, adjust with some sort of lever. Plugs tend to fracture when hit hard enough and you might never know until it doesn't work.

Posted on Mar 23, 2010

  • 21 Answers

SOURCE: I have a 1995 suzuki intruder 1400, I'm looking

behind the cover on top of the cylinder, Right side for the front, Left for the rear

Posted on Aug 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1995 Suzuki VS 1400 Intruder fuel pump and relay location


Hi, Danny for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
1995 Suzuki VS 1400 Intruder fuel pump location Google Search 1995 Suzuki VS 1400 Intruder fuel pump relay location Google Search
Suzuki Intruder VS1400 Service Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
Suzuki VS1400 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Feb 21, 2018 | 1995 Suzuki VS 1400 Intruder

1 Answer

1995 Suzuki VS 1400 Intruder clutch spring bolt torque spec


Hi, Daniel for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
http://www.venold.com/tl1000s/specs/torque_specs.html
Thread clutch spring bolt torque specs
Suzuki Intruder VS1400 Service Manual
OEM parts for Suzuki
Suzuki VS1400 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Jun 23, 2017 | 1995 Suzuki VS 1400 Intruder

1 Answer

1996 suzuki intruder 1400 hard to start and keep running with new spark plugs


Hi, Chad and the usual suspects are:
1. Spark plugs in bad condition or have an improper gap or are partially fouled.
2. Spark plug cables in bad condition.
3. Battery nearly discharged, should have 12.5 volts.
4. Discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Throttle controls not adjusted correctly.
6. Water or dirt in the fuel system.
7. Water or dirt in the carburetor.*
8. Intake air leak.
9. Fuel tank vent hose and vapor valve plugged, or fuel line closed off, restricting fuel flow.*
10. Enricher valve inoperative.*
11. Engine lubricant to heavy (winter operation).
12. Ignition is not functioning properly (possible sensor failure).
13. Faulty ignition coil.
14. Valves sticking.
* Carbureted models.
For more information about your issue, please visit the websites below. Good luck and have a nice day.
http://fullmanuals.com/search/?q=1996+Suzuki+VS+1400+Intruder

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Sep 02, 2015 | 1996 Suzuki VS 1400 Intruder

1 Answer

91 intruder not run on mid and high.Only idile work


Hi, Adam and the usual suspects are:
1. Spark plugs in bad condition or partially fouled.
2. Spark plug cables in bad condition or leaking.
3. Spark plug gap too close or too wide.
4. Faulty ignition coil, module and or sensor.
5. Battery nearly discharged.
6. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
7. Intermittent short circuit due to damaged wire insulation.
8. Water or dirt in the fuel system, carburetor or filter.
9. Fuel tank vent system plugged or carburetor vent line closed off.
10. Carburetor controls misadjusted.
11. Damaged carburetor or intake seals.
12. Loose or dirty ignition module connector at crankcase.
13. Faulty MAP, CKP, O2, and or CMP sensors.
14. Incorrect valve timing.
15. Weak or broken valve springs.
16. Damage intake or exhaust valve.
For more information about your issue, please visit the websites below. Good luck and have a nice day.
https://www.tradebit.com/filesharing.php/search/0/1991+suzuki+vs+1400+intruder

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Aug 23, 2015 | 1991 Suzuki VS 1400 Intruder

1 Answer

How many spark plugs does a suzuki intruder 1400 have and where are they?


under the gas tank, remove the gas tank to replace them, it has 2 plugs

Sep 28, 2009 | 2000 Suzuki VS 1400 Intruder

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

80637 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4995 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...