Question about kawasaki KX 125 Motorcycles

Open Question

Clutch hard to disingage 1991 kx 125

Not clear on function of 91 kx 125

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

goofduck
  • 490 Answers

SOURCE: my 1986 kx 125 clutch does not engage worked prior

possible the cable is needing to be adjusted make sure it is pulling on the pivot

Posted on Apr 15, 2009

  • 3567 Answers

SOURCE: 1991 rm 125 clutch springs torque

The clutch springs are not the problem. Check to see if all parts were installed as shown below. The clutch plates alternate Fiber/steel/fiber/steel, starting and ending with a fiber. Be sure the teeth on the clutch rack are pointing to the rear.

A “very helpful” rating for this answer? Thanks!

2043956.gif

Posted on Jun 27, 2009

carlsbiz
  • 1124 Answers

SOURCE: cylinder 1991 kx 125

If your going to the trouble of replacing the cylinder - wouldn it make sense to replace it with a quality part ? You really should do new piston & rings while your at it..
If not - you might be doing it again allot sooner than you would like..

Your local bike shop should be able to get one for you..

Hope this helps !!
rate me good ;o)

Posted on Jul 14, 2009

  • 440 Answers

SOURCE: 91 SUZUKI RM 125 CLUTCH PROBLEM

First, try the cable adjustment at the lever end, if no more movement re-adjust inwards, then adjust at the clutch end.
If no joy, then it is either the lifter mechanism or the clutch its self.
Ride Safe
Bike-Doc

Please mark this as useful (if it has been!!)

Posted on Aug 03, 2009

  • 1 Answer

SOURCE: clutch slipping

i have a honda cr 125 i put a new clutch , springs and 1st 2nd 5th are good but 3rd 4th are slipping. can some give me some help ! thank you

Posted on Oct 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to attach the clutch cable to the engine i have a 00 kx 125 cant figure out the clip on the clutch to cable mechanism


I am not familiar with a 00 kx 125.

Typically, a clutch cable has a barrel (or other special shaped piece) on the end which clips into a holder on the lever OR there is a threaded rod with two nuts on it to allow for adjustment.

I hope this helps.

Thanks for your interest in FixYa.com

Mar 23, 2011 | 2003 kawasaki KX 125

1 Answer

Cr125 99 my clutch keeps sticking when i change gear


Your clutch is not disingaging all the way so if you can't adjust it far enough at one end or the other than you could have a worn clutch push rod. First adjust it at the lever. Hopefully you'll be good to go.

Sep 18, 2009 | 2002 Honda CR 125 R

2 Answers

Clutch slipping


Clutch plates are probably toasted. Drain the oil, remove the cover where the clutch cable goes into and check them out. Not hard to replace but you do need a special tool to get the plates off/on.

Aug 20, 2009 | 2003 kawasaki KX 125

1 Answer

The clutch on my 1999 kx 125 does not engauge. How do i fix it?


check your clutch assemly in side your engine (right side) maybe you forgot to put back or not in place, its look like a small solid barrels. connected to your clutch arm.

Jul 28, 2009 | 2003 kawasaki KX 125

1 Answer

Kx 125 2003


im pretty sure that the bike is a all in one menin that oil in tranny is same that flows in motor

Jul 22, 2009 | 2003 kawasaki KX 125

1 Answer

Wher can i get a cylinder and piston kit to suit my 1991 kx 125 cheap as pos


Hi
Just to confirm with you... looking for a piston kit, barrel, and topend gasket kit for your 1991 kx125?
Where in the world are you?
regards
robotek

Jul 14, 2009 | 2003 kawasaki KX 125

1 Answer

Cylinder 1991 kx 125


If your going to the trouble of replacing the cylinder - wouldn it make sense to replace it with a quality part ? You really should do new piston & rings while your at it..
If not - you might be doing it again allot sooner than you would like..

Your local bike shop should be able to get one for you..

Hope this helps !!
rate me good ;o)

Jul 14, 2009 | 2003 kawasaki KX 125

1 Answer

My 1986 kx 125 clutch does not engage worked prior


possible the cable is needing to be adjusted make sure it is pulling on the pivot

Apr 15, 2009 | 2003 kawasaki KX 125

1 Answer

91 kx 250 tight clutch


are you shure you have ALL the clutch plates?? the cable is well lubed? the pushrodbearing/adjuster may be in the middle of the clutch basket cover plate. OR you have the wrong springs installed!

Jan 23, 2009 | kawasaki KX 250 Motorcycles

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...