Question about Harley Davidson Motorcycles

1 Answer

How do you remove the quick connecter from gas tank

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Harley Davidson Master
  • 1,554 Answers

If you mean how to remove fuel line from the quick disconnect, pull up and hold the chrome collar while you twist and wiggle the fuel line off:

http://www.hdforums.com/forum/attachments/engine-fuel-intake-exhaust/106463d1269992211-how-to-remove-2010-harley-davidson-fat-bob-fuel-tank-1269983804678.jpg

If you mean how to remove the fitting from the gas tank, it unscrews:

http://i74.photobucket.com/albums/i274/uplandhunter/DSCN0057.jpg

Posted on Feb 12, 2014

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 3 Answers

SOURCE: gas line plastic piece that screws into the bottom of the tank broke, need a new one

I'm not sure about the size of your fitting, but I found the same kind of plastic quick connect fittings at Lowes hardware store. most Hardware stores will have them if its the type I'm thinking of. There in the irrigation Department and most are compatible with fuels.See if they will work. Doug

Posted on Apr 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I remove the gas tank out of a 2006 Ford 500 no one knows


SECTION 310-01: Fuel Tank and Lines 2006 Freestyle/Five Hundred/Montego Workshop Manual REMOVAL AND INSTALLATION

All vehicles
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02 .
  1. Release the fuel system pressure. For additional information, refer to Section 310-00 .
  1. Drain the fuel tank. For additional information, refer to Section 310-00 .
All wheel drive vehicles
  1. Remove the rear driveshaft. For additional information, refer to Section 205-00 .
All vehicles
  1. Remove the muffler. For additional information, refer to Section 309-00 .
  1. Disconnect the fuel vapor control tube assembly valve-to-fuel vapor tube quick connect coupling. For additional information, refer to Section 310-00 .
  1. Disconnect the fuel supply tube-to-fuel filter quick connect coupling. For additional information, refer to Section 310-00 .
  1. Disconnect the fuel vapor tube-to-fuel vapor control tube assembly valve quick connect coupling. For additional information, refer to Section 310-00 .
  1. Disconnect the fuel tank wiring harness electrical connector at the rear of the fuel tank.
  1. Release the clamp and remove the fuel tank filler hose from the fuel tank.
  1. Place a suitable lifting device under the fuel tank.
  1. Remove the 2 front fuel tank strap bolts.
    • To install, tighten to 35 Nm (26 lb-ft).
  1. NOTE: Do not bend the fuel tank straps.
    Loosen the 2 rear fuel tank strap bolts and position the 2 fuel tank straps aside.
  1. Lower the fuel tank enough to move forward, clear of the fuel straps then complete the lowering procedure.
  1. To install, reverse the removal procedure.

Procedure revision date: 08/19/2009


May 03, 2016 | Ford Cars & Trucks

1 Answer

How to pull a gas tank from a 1997 grand am


first check fuel pump relay to make sure that its good by swapping in like relay over, if that doesn't work disconnect negative battery cable, u need a floor jack with block of wood supporting gas tank, remove gas tank straps slowly lower tank , and unhook electric connectors and fuel quick connects ( they usually require u push into the fuel line then pull out) then remove lock ring with flat screw driver and hammer unless u can buy fuel tank lock ring tool

Aug 10, 2014 | 1997 Pontiac Grand Am

1 Answer

How do i remove the propoane gas tank safely...i lost my instruction manual. need to replace the tank.


Turn the gas tank valve OFF by turning the tank valve clockwise. Then disconnect the hose from the tank valve and remove the tank from the grill. When reinstalling a full tank, do everything in reverse of removing it. In addition, once the hose is connected to the tank, open the tank valve VERY, VERY SLOWLY (Slow motion, slow). Opening it quickly, can cause the grill's regulator to lockup and provide little or no gas to the burners.

Hope this helped you and Happy Grilling. Thanks for choosing FixYa.

Aug 26, 2011 | Weber Genesis Silver B Grill

3 Answers

Where is the fuel pump located on the 2006 Ford Five Hundred? Is it located inside the fuel cell?


Yep!


c17hydro_94.gif
Removal & Installation
  1. Disconnect the negative battery cable.
  2. Drain the fuel tank.
  3. Remove the rear lower seat cushion.
  4. Remove the fuel pump module cover.
  5. Remove any dirt that has accumulated around the fuel pump module attaching flange to prevent it from entering the tank during service.
  6. Disconnect the fuel pump electrical connectors.
  7. Disconnect the fuel pump quick connect coupling from the fuel pump module.
  8. Disconnect the fuel vapor tube quick connect coupling from the fuel pump module.
  9. Turn the fuel pump module locking ring using a locking ring removal tool, and remove the locking ring.
  10. Remove the fuel pump module and disconnect the quick connect fittings from the bottom of the fuel pump.

Jan 17, 2011 | Ford Five Hundred Cars & Trucks

1 Answer

How do I replace the battery?


Battery is located under rear of gas tank. You have to remove gas tank completely or at least unbolt the tank and prop it up to gain access to the battery.

If you remove the tank completely, you need to disconnect the fuel lines (quick connectors) and also disconnect the crossover pipe at the lower front of the gas tank. This line also has a quick connect fitting on it and has to be pulled out to the left side once disconnected. Pay close attention to the vent hoses and where they connect to the vapor recovery canister. If you reverse the hoses, you can ruin the recovery canister.
Hope this helps a bit. Good Luck!

Aug 23, 2010 | 2002 BMW R 1150 GS Adventure

1 Answer

Name & source for quick-connect LP gas tank adapter piece?


Did you find what you needed? I have the same problem.

Jul 22, 2010 | Thermos Stainless Steel Gas Grill

1 Answer

How do i remove gas tank


NOTE Always maintain cleanliness when servicing fuel system components.
  1. Relieve the fuel system fuel pressure.
  2. Drain the fuel tank.
  3. Raise the vehicle.
  4. Disconnect the fuel tank wiring harness connector at the body pass through.
  5. For 3.4L engines, disconnect the quick-connect fitting at the inlet side of the in-pipe fuel filter.
  6. For 3.4L engines, disconnect the quick-connect fitting on the fuel return pipe, near the fuel filter.
  7. Disconnect the fuel tank evaporative emission (EVAP) pipe quick-connect fitting near the fuel filter.
  8. Remove the fuel feed, the fuel return, and the EVAP lines from the fuel pipe retainer.
  9. Remove the retaining nut for the EVAP canister bracket.
  10. Loosen the fuel tank filler pipe hose clamp.
  11. Disconnect the fuel tank filler pipe from the fuel tank.
  12. For 3.5L engines, disconnect the EVAP vent pipe near the fill pipe hose.
    NOTE Do not bend the fuel tank straps. Bending the fuel tank straps may damage the straps.
  13. With the aid of an assistant, support the fuel tank and remove the fuel tank strap attaching bolts.
  14. Remove the fuel tank from the vehicle and place the fuel tank in a suitable work area.
  15. If the fuel tank is not being replaced, go to the Installation Procedure.
  16. Disconnect the fuel tank wiring harness from the fuel sender assembly.
  17. Remove the fuel sender shield from the fuel tank.
  18. Disconnect the fuel feed and return pipe quick-connect fittings at the fuel sender.
  19. Disconnect the EVAP vapor pipe assembly from the fuel sender.
  20. Remove the fuel and/or EVAP pipe assembly from the fuel tank.
  21. Remove the fuel sender assembly.
  22. Remove the EVAP vent solenoid valve.
  23. Remove the EVAP canister.

To install:
  1. Install the EVAP canister.
  2. Install the EVAP vent solenoid valve.
  3. Install the fuel sender assembly.
  4. Install the fuel and/or EVAP pipe assembly.
  5. Connect the EVAP vapor pipe to the fuel sender assembly.
  6. Connect the fuel feed and fuel return pipes at the fuel sender.
    NOTE Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
  7. Install the fuel sender shield to the fuel tank and tighten the shield nuts to 53 inch lbs. (6 Nm).
  8. Connect the fuel tank wiring harness to the fuel sender assembly.
  9. With the aid of an assistant, position and support the fuel tank.
    NOTE Do not bend the fuel tank straps. Bending the fuel tank straps may damage the straps.
  10. Install the fuel tank retaining strap attaching bolts and tighten the fuel tank retaining strap bolts to 35 ft. lbs. (47 Nm).
  11. Install the EVAP canister retaining nut and tighten the retaining nut to 53 inch lbs. (6 Nm).
  12. Connect the fuel tank filler pipe to the fuel tank and tighten the fuel tank filler pipe hose clamp to 22 inch lbs. (2.5 Nm).
  13. Connect the fuel feed pipe quick-connect fitting at the inlet side of the fuel filter.
  14. Connect the fuel return pipe quick-connect fitting near the fuel filter.
  15. Connect the fuel tank EVAP pipe quick-connect fitting near the fuel filter.
  16. Connect the fuel tank wiring harness connector at the body pass-through.
  17. Lower the vehicle.
  18. Add fuel and reinstall the fuel tank filler pipe cap.
  19. Connect the negative battery cable.
  20. Inspect for fuel leaks with the following procedure:
    1. Turn ON the ignition for 2 seconds.
    2. Turn OFF the ignition for 10 seconds.
    3. Turn ON the ignition.
    4. Inspect for fuel leaks.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Apr 15, 2010 | 2001 Pontiac Aztek

2 Answers

How do i rewmove a gas tank from a chevy cavalier


Go to autozone.com and register (its free) and then you can access their repair guide; it will show you how to remove the tank

Nov 10, 2009 | 2003 Chevrolet Cavalier

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

366 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Mike

Level 3 Expert

4340 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...