Question about TVS Motorcycles

Open Question

Valve problem for tvs jive

Valve clearance adjustment

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 41 Answers

SOURCE: want to know what is the valve clearance of bajaj ct-100 m/c?

get the engine on top dead center, take valve caps off turn over engine slowly until intake valve just closes u will be close to top dead center there. then i use a small long screwdriver i put in sparkplug hole and turn engine very slow when piston just startes to go back down i adj valves. intake valve 3 thousands and ex valve 5 thousands

Posted on Nov 25, 2008

Ad
  • 7 Answers

SOURCE: clearance for inlet and exhaust valve adjustment

Hi there,

Not sure about clearance levels, but can tell you there is no English manual for the XJR 400 - only Japanese. Try the XJR owners club. It's full of troubleshooting questions answered in the forums.

Hope this helped

Danger :)

Posted on Jul 27, 2009

  • 302 Answers

SOURCE: hi, i need to adjust the valve clearances on my DR 800

May I suggest a trip to your local library. Cycle repair books should be in 646 stacks of reference.

Posted on Oct 11, 2009

ckoira57
  • 267 Answers

SOURCE: how to valve clearance inspection

The site link below will give you the info you need from a free download.
Select your make, model and year and download a free manual...it's a big one, about 26Mb.
Then get yourself some metric feeler guages and go for it!
http://www.yamahaownershandbook.com.au/index.php

Cheers.

Posted on May 02, 2010

  • 6 Answers

SOURCE: noise like valve adjustment too

Valve adjustment is not a simple task, the valve clearances will need "shimming" these are thin pieces of metal to take up the gap or slack between valve and rocker arm. You will need service manual and some feeler gauges, and purchase a set of shims

Posted on Jul 07, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Valve clearance


Valve clearance Google search your year make and model valve clearance. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Checking and adjusting valves
Engine Valve Adjustment Procedure The Right Way
Valve Clearance Adjustment
Valve clearance Google Search

Aug 10, 2016 | Cars & Trucks

1 Answer

Tvs jive bike battery is not charge while bike is running


Hi, Shekhar you have may have a faulty charging system for more information about your question and valuable free downloads that you will need please visit the websites below. Good luck and have a nice day.
Stock motorcycle regulator rectifier check out
How to Test Motorcycle Charging System
TVS Jive 2011 service manual DOWNLOAD FREE FULLMANUALS COM

Feb 04, 2016 | TVS Motorcycles

1 Answer

Adjustment clearance valve rocker tappet


Pulsar 135 original tappet clearances
INTAKE VALVE 0.05 mm
EXHAUST Valve 0.10 mm
Get this valve adjustment done by the experienced mechanic with the help of Feeler Gauge

Aug 28, 2013 | 2010 Bajaj Pulsar 135 DTSi

1 Answer

Tvs jive wiring diagram


Hi, Yallappa for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Jive, despair not, for a mere zero $ you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Tvs jive wiring diagram Google Search
tvs metro wiring diagram Google Search
https://www.tvsmotor.com/pdf/Manuals-TVS-Sport.pdf
http://www.arbazdailynews.com/Id-7275167/tvs-jive-service-manual.pdf
TVS Jive spareparts The World Leading Motorcycle Spare Parts Supplier

Apr 20, 2013 | 2011 TVS Jive

1 Answer

How adjust valve clearance


guys mainly the valve gets heated and gets expand so the valve clearance is adjusted . according to my studied knowledge the inlet valve clearance should be perfectly 0.5 mm and the exhaust port must be 0.6 to 0.7 mm. this the perfect tuning for the 2 wheelers . [ remember guys before you set valve clearance make sure that engine is fully cooled condition.....
thankyou........................................................
ABHI ROCKRANGER

Aug 04, 2012 | Hero Honda Splendor Motorcycles

1 Answer

I need the required valve & inyector clearance on a M11 engine


Cummins M11

Intake valve clearance 0.010 inch
Exhaust valve clearance 0.024 inch

The firing order is 1-5-3-6-2-4 and that is the order the valves should be adjusted started with first timing mark on main pulley adjust cylinder number 1 The valves and injector should be adjusted at the same time The crankshaft is then rotated 120 degrees to next timing mark and cylinder 5 is adjusted, the crank is rotated again 120 degrees to next timing mark and cylinder 3 is adjusted.then back to the first timing mark, cylinder 6 is adjusted, etc/

Adjusting nut on plunger should be adjusted to the point where you feel the plunger just reaches the bottom.of travel/bottoms out.

Feb 15, 2012 | Cars & Trucks

1 Answer

Hi,im looking for valve clearance specs for the kawaski 23hp fh680v-8s10 motor ??


The adjustment is .003 - .005. You must hold the rocker arm by lifting up on the valve depressing side and pressing down on the push-rod side while making the adjustment. Any other means of adjustment and it will be incorrect.

Below is quoted from the service manual without pictures
(FixYa Note TORQUE on lock screws is 61 inch pounds)

Valve Clearance Inspection
NOTE
?? Valve clearance must be checked when the engine is cold (at room
temperature).
• Remove the rocker cover (see Cylinder Head Removal).
• Place the piston at top dead center (TDC) of the compression stroke
turning the crankshaft clockwise facing the flywheel.
No.1 Cylinder:
?? The left projection [A] on the flywheel is faced with the right leg [B]
on the #1 ignition coil [C] as shown.
?? Check the intake and exhaust valves are closed completely, if not turn
the flywheel one turn (360??) clockwise and face the left projection with
the right leg again.
No.2 Cylinder:
?? The left projection [A] on the flywheel is faced with the right leg [B]
on the #2 ignition coil [C] as shown. Follow No.1 Cylinder alignment.
• Then check the valve clearance.
?? Using a thickness gauge [A], measure the valve clearance between
the rocker arm [B] and the valve stem end.
If the valve clearance is incorrect, adjust it.
Valve Clearance (when cold)
Intake, Exhaust 0.075 0.125 mm (0.003 0.005 in.)

Thanks for using FixYa.

Kelly

May 18, 2010 | Garden

2 Answers

My TVS fiero f2 motor cycle is having heavy tapplet sound,as i approached a mechanic he told me to change camshaft, is it necessary?As is it is so expensive.My bike gives mileage of 40 kmpl.plz suggest me...


Have you first tried to adjust the valve clearance? It could be just the valve clearance are out of specs ...(lose) and thus the noise.
Check the valve clearance first.
Hope this helps!

Aug 09, 2009 | 2005 TVS Fiero F2

1 Answer

Want to know what the valve clearances are for my 1999 hyndai excel


Adjust the jet valve clearance before the adjustment of the
intake valve clearance.
Jet valve clearance (hot engine)
[Standard value]. . . . . . . . . . . . . . . . . . . 0.25 mm (0.010 in.)

now adjust valve clearance
Valve clearance (hot engine) [Standard value]
Intake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.15 mm (0.006 in.)
Exhaust. . . . . . . . . . . . . . . . . . . . . . . . . . 0.25 mm (0.010 in.)

Jul 30, 2009 | 1990 Hyundai Excel

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top TVS Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Milton Scott

Level 1 Expert

23 Answers

Are you a TVS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...