Question about 2001 Yamaha YZ 426 F
Posted by Anonymous on
Hi, Anonymous and the usual suspects are:
1. Fuel tank empty.
2. Fuel supply valve/petcock turned off.
3. Fouled spark plugs.
4. Engine flooded as a result of overuse of the enricher.
5. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
6. Fuel valve/petcock or filter clogged.
7. Fuel line to carburetor or throttle body pinched or kinked.
8. Carburetor float stuck.
9. Fuel injectors clogged.
10. Severely discharged or damaged battery, you need 12.5 volts or better and be able to pass a load test if necessary.
11. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
12. Loose or corroded wire connection at the coil, battery or plug between ignition sensor and module.
Spark plug cables in bad condition and shorting, cable connections loose, or connected to the wrong cylinders.
13. Ignition timing incorrect due to a faulty ignition coil, ignition module or sensors (MAP, CMP, CKP, O2, TPS, ETP, IAC,or BAS).
14. Faulty neutral, clutch lever, or kickstand safety switch.
15. Faulty fuel pump or fuse or relay.
16. Faulty CDI box if applicable.
17. Tilt sensor needs a reset.
18. Security system not disarming alarm needs a reset.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
YZ426f WON START YZ 400 426 450
Yz426f Some advice please Dirtbikes
Yamaha YZ426F Owner Service Manual
OEM parts for Yamaha
Yamaha YZ450F Owner Manual Page 3
Posted on Aug 02, 2016
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: getting my 2001 yz 426 started
hold the decompression lever in and kick it slow then let go of the decompression lever and give it a good kick without using the decompression lever.
Posted on Jan 30, 2009
SOURCE: TROUBLE STARTING BIKE HELP
1. Remove the plug from the cylinder.
2. Put the plug wire cap on the removed plug.
3. Have a buddy push down several times on the kick starter
while you look at the end of the plug for a spark.
This works best in a dim or dark garage.
Posted on Mar 20, 2009
You know aluminum can be welded very successfully now, so best bet is to remove that case and take it in to a good welder..You can ry the quick fix (JB Weld) is what i recommend, but success is rare !....good luck to you my friend...Tim
Posted on May 10, 2009
SOURCE: yz 250 4-stroke It's extremely hard to kick over, so it has a pressure release lever on the handle bar. Is there some "proper" way to kick it over, or do I just kick it while holding the "pressure rel
That lever is a compression release and pulling it will make kick stating an excersie routine. Kick start without the pulling the lever. See how that works. good luck.
Posted on May 29, 2009
Tips for a great answer:
Mar 10, 2013 | 2001 Yamaha YZ 426 F
Sep 09, 2012 | 2001 Yamaha YZ 426 F
Apr 18, 2012 | 2001 Yamaha YZ 426 F
Feb 11, 2011 | 2001 Yamaha YZ 426 F
May 18, 2010 | 2001 Yamaha YZ 426 F
Nov 13, 2009 | 2001 Yamaha YZ 426 F
Jan 19, 2018 | kawasaki Motorcycles
20 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: