Question about ATK 125 4-stroke Motorcycles

1 Answer

1994 quad runner doesnt want to stay running unless i flip the high low beam switch

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • ATK Master
  • 41,832 Answers

Hi, Anonymous for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix or parts inquiry. If necessary transport your vehicle to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.
http://www.atkusa.com/parts/parts

Posted on Oct 31, 2015

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: high beam shuts off when on for a long time ford ed falcon

try changing your high and low beam relays, and maybe install a relay for each light, all fords have the same problem

Posted on Dec 22, 2008

bunnydawg
  • 5158 Answers

SOURCE: High Beam Inoperative

test the bulb ... the hi beam portion of the headlight could be burnt out

Posted on Mar 10, 2009

  • 420 Answers

SOURCE: Won't start

If the engine will not even crank have the battery load tested, if the battery is fine it could be the ignition switch or the starter button. Also make sure all of your grounds are tight and clean.

Posted on Apr 19, 2009

  • 2 Answers

SOURCE: high beam blows fuse

If I recall, they have a problem with wires chaffing under the fairing. Good luck the fairing has to come off.

Posted on Apr 20, 2009

NeTTeKco
  • 72 Answers

SOURCE: engin wont stay running

check the spark plug sounds like you gotta fouled plug if that dont work get some carb cleaner and spray the carb out and check the air filter under the seat

Posted on Aug 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

06 Wrangler Tj. The High Beams stay on, and when I pull the switch, the high beams stay on. Low beams never come on. Could there be something wrong with the lights or the multifunctional switch


Its sounds more consistent w a switch problem but make sure u are getting voltage at the headlight connectors when they are not on before convicting the switch or lights. Both lights rarely go out at the same time unless an electrical short is the cause,

Jul 13, 2017 | Cars & Trucks

1 Answer

I have a 2001 dodge ram 1500. does anyone know anything about the headlight wiring?I would like to know how it works. Currently , i know the violet wire is 12v constant and the vt/wht wire is ground when...


Well, where to start...
First there are 4 different headlamp systems available for 2001 Dodge Ram 1500.

> WITH Daytime Running Lights and WITH Quad Headlamps

> WITH Daytime Running Lights and WITHOUT Quad Headlamps

> WITHOUT Daytime Running Lights and WITH Quad Headlamps

> WITHOUT Daytime Running Lights and WITHOUT Quad Headlamps

So providing you with an EXACT flow chart of what happens depends on which system your truck is equipped with.

However, the general jist of it goes like this:

The Violet wire you mention is your power feed to the bulbs (high beam and low beam elements) from the headlamp fuse (HOT AT ALL TIMES). The dimmer switch basically determines which of the two headlamp elements is going to get grounded to complete the circuit. When the Violet/White wire gets grounded, that is low beam. When the Red/Orange wire gets grounded, that is high beam.

Just a little "Automotive Electrical Systems 101":

Your Headlamps work just like ALL automotive electrical circuits. The power goes from battery POSITIVE to battery NEGATIVE in order to complete the circuit. PERIOD! Every circuit on your vehicle is as simple as that. If you take a closer look at the wiring diagrams, you will see this.

Apr 10, 2012 | 2001 Dodge Ram 1500 Truck 2WD

2 Answers

Ford 2003 Focus. Low beam headlights not working. Hi beam do. Can get low beam to come on if flip between hi and low but don't stay on.


That sounds like a problem with the high beam switch in the low beam position. The contact is bad or the detent retainer isn't keeping the contact engaged.

Jun 22, 2011 | 2003 Ford Focus

1 Answer

My low beams do not work. If I put on the high beams both the low and high beams are on.


Both highs and lows coming on when flipping to highs is normal. (You low beams are dual filament) Now low beam issue is either "lo beam fuse" in your fuse box or dimmer switch (switch used to flip between high/low beams. Check your fuses first, it their good then you need a new dimmer switch.

Feb 26, 2011 | Mercury Marquis Cars & Trucks

1 Answer

Went to warm up my car and switched my low beams off. when I got ready to drive off switched low beams back on and wouldn't come on. High beams work but no lows. already changed bulbs


Your dimmer switch is bad (lever used to flip between hi/low beams) they're only plastic and they go bad. Before you change check fuses, buy I highly suspect dimmer switch.

Feb 21, 2011 | Chevrolet TrailBlazer Cars & Trucks

1 Answer

How do i fix high beam switch? on my 94 deville when i pull back to turn on my high beam, it won't click and stays on low beam. how do i fix the dimmer switch?


On this vehicle you need to pull the steering wheel upper and lower cover apart, then you can have access to replace your switch, please get back to me with any questions, thanks!!!

Apr 10, 2010 | 1994 Cadillac DeVille

1 Answer

Day time running light and low beams stopped


I would say your light switch is either dirty or bad.
www.rockauto.com

Feb 04, 2010 | 2000 Chevrolet Impala

1 Answer

GMC truck light issue: My high beam / low beam switch is built into my blinker. To replace it costs hundreds. Currently, my lights are stuck on high beam. I would like to put them on low beam permanently...


well as a tech i dont recomend it but all you got to do is swap the wires on the headlamps at the bulb you will see 3 wires one is a ground the other feeds low beam the other high beam . take a test light and find the one thats hot and cut it and connect it to the other blade , leave only one wire on the low beam terminal so you dont short it out .

Aug 27, 2009 | GMC Sierra 1500 Cars & Trucks

1 Answer

1994 Jeep Cherokee 4 door, 4.0L straight 6


First check the low beam filaments of both front headlamps. Both can burn out. On the side of the steering column is usually where the dimmer switch is located. If you remove the covers you can expose it and tell if it needs adjustment or needs to be replaced.

Mar 20, 2009 | 1994 Jeep Cherokee Country

1 Answer

1994 ford f-150 with day time running lights headlightnot working


Daytime Running Lamps
The daytime running lamp (DRL) system is designed to turn the high beam headlamps on, with a reduced light output, and without illuminating the high beam indicator lamp in the instrument panel. You have a DRL Module.
The multifunction switch is the stalk on your column.

This is 96 F150 circuit. Don't have 94.

51f651c.gif
Symptom Chart, Headlamps HEADLAMPS Condition Possible Source Action
  • Headlamps Inoperative
  • Circuitry open/shorted.
  • Damaged headlamp switch.
  • Blown fuse.
  • GO to Pinpoint Test A .
  • Headlamps On Continuously
  • Circuitry open/shorted.
  • Damaged headlamp switch.
  • GO to Pinpoint Test B .
  • High Beams or Low Beams Inoperative
  • Circuitry open/shorted.
  • Damaged multi-function switch.
  • GO to Pinpoint Test C .
  • One High Beam or One Low Beam Headlamp Inoperative
  • Circuitry open/shorted.
  • Damaged connector.
  • Headlamp bulb damaged.
  • GO to Pinpoint Test D .
  • Flash-to-Pass Inoperative
  • Blown fuse.
  • Circuitry open/shorted.
  • Damaged multi-function switch.
  • GO to Pinpoint Test E .



73d6d64.gif

Feb 25, 2009 | 1994 Ford F150 Styleside Supercab

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top ATK Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Fabrice Wolters

Level 2 Expert

265 Answers

Gregg Mahin
Gregg Mahin

Level 3 Expert

41832 Answers

Are you an ATK Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...