Question about 1999 kawasaki ZX-9R Ninja

1 Answer

1999 Kawasaki ZX-9R Ninja clutch slipping

Zx9r clutch slipping/grinding in first gear @

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • kawasaki Master
  • 48,024 Answers

Hi, Anonymous and the usual suspects are:
1. Clutch controls improperly adjusted.
2. Insufficient clutch spring tension.
3. Friction discs or steel discs are worn or warped past specs.
4. New wet clutch not pre-soaked for 24 hours.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
zx 9r net View topic Clutch Slip
http://kawasakiworld.com/zx-12r/42540-clutch-slipping-what-needs-replaced.html
http://serwer.robert.webd.pl:30/manual/Kawasaki_ZX_9R_(ZX900_C1,D1)_98_Service_Manual_ENG.pdf
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Posted on Mar 26, 2018

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 5 Answers

SOURCE: I have a ZX9R C1, , clutch is slipping, but has dramatically got

clutch springs need upgrading?,this may cure problem without having to buy new plates,also hopefully you hav`n`t put any friction reducing oil in the engine,as these products can cause a wet clutch to slip,also an old trick is to add an extra metal plate into the pie,but sometimes there isnt enough room in the clutch basket,also check the clutch cable is releasing properly[2mm of free play at the lever],cheers

Posted on Nov 21, 2009

  • 232 Answers

SOURCE: not going into gear properly slipping then getting

Hi , Firstly make sure you are using the correct oil as some oils burn too easely and loose their properties and do not lubricate .
the syncro in the gearbox could be out and also causing the gear selection to be only made at low speed .

Posted on Jul 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996 Kawasaki ZX-9R Ninja clutch judders


Hi, Anonymous and the usual suspects are:
1. Improperly adjusted clutch.
2. Contaminated or broken driven fiber plates.
3. Warped drive steel plates.
4. Warped pressure plate.
5. Worn out pressure plate springs.
6. Incorrect clutch oil type.
7. Failed clutch basket bearing.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Clutch kit replacement Kawasaki Ninja ZX9R
Changing the clutch on my Kawasaki 2005 ZX10R Ninja
Kawasaki Ninja ZX 9R Service Manual
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Jul 07, 2014 | 1996 kawasaki ZX-9R Ninja

1 Answer

Will 1995 carburetors fit a 1997 Kawasaki ZX-9R Ninja


Hi, Anonymous ( probably ) parts swapping is common with most motorcycles when it comes to interchangeable or compatible parts from one model with another "EXCEPT" for the CDI's they are year-make-model "SPECIFIC" the best thing to do is call your local Dealership Parts Department or a reputable independent shop. If your location is not near a shop then go online and find a parts catalog or "FICHE" and match part numbers depending on your criteria.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Kawasaki Ninja ZX 9R Service Manual
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals
Kawasaki ZX9R
Kawasaki Ninja ZX 9R

Jun 14, 2014 | 1997 kawasaki ZX-9R Ninja

1 Answer

1999 Kawasaki ZX-9R Ninja valve adjustment


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
ZX 9R Valve check and Adjustment
ZX9r Valve check Part one
http://serwer.robert.webd.pl:30/manual/Kawasaki_ZX_9R_(ZX900_C1,D1)_98_Service_Manual_ENG.pdf
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Jul 16, 2012 | 1999 kawasaki ZX-9R Ninja

1 Answer

1996 Kawasaki ZX-9R Ninja how to repair the starter clutch


Hi, Chip for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.zxforums.com/forums/zx-9r-forum/18346-1996-zx9-starter-starter-clutch-problems.html
2005 ZX 6R starter starter clutch swap
KAWASAKI ZX900 C1 Service Manual
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Mar 22, 2012 | 1996 kawasaki ZX-9R Ninja

1 Answer

1999 Kawasaki ZX-9R Ninja how do I replace the clutch


Hi, Jgg91 for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
How To install Clutch Kit KawiForums Kawasaki Motorcycle Forums
Clutch kit replacement Kawasaki Ninja ZX9R
http://serwer.robert.webd.pl:30/manual/Kawasaki_ZX_9R_(ZX900_C1,D1)_98_Service_Manual_ENG.pdf
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Jun 29, 2011 | 1999 kawasaki ZX-9R Ninja

1 Answer

1999 Kawasaki ZX-9R Ninja thermostat location


Hi, Eshepp84 for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
1999 Kawasaki ZX 9R Ninja thermostat location Google Search
http://www.zxforums.com/forums/zx-9r-forum/123746-97-zx9r-overheating.html
http://serwer.robert.webd.pl:30/manual/Kawasaki_ZX_9R_(ZX900_C1,D1)_98_Service_Manual_ENG.pdf
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Apr 09, 2011 | 1999 kawasaki ZX-9R Ninja

1 Answer

1998 Kawasaki ZX-9R Ninja how do you change the thermostat


Hi, Danettvigil for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.zxforums.com/forums/zx-9r-forum/39408-1999-zx9r-overheating-issues.html
1998 Zx9 Kawasaki Tear Down Part 1
http://serwer.robert.webd.pl:30/manual/Kawasaki_ZX_9R_(ZX900_C1,D1)_98_Service_Manual_ENG.pdf
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Feb 24, 2011 | 1998 kawasaki ZX-9R Ninja

1 Answer

1997 Kawasaki ZX-9R Ninja race wiring diagram


Hi, Waltonsljcc the answer to this question is way above my pay grade for this situation, I would call or visit my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
1997 Kawasaki ZX 9R Ninja race wiring diagram Google Search
Ignition Switch Straight wire ZX Forums
Kawasaki Ninja ZX 9R Service Manual
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Feb 21, 2011 | 1997 kawasaki ZX-9R Ninja

1 Answer

1999 Kawasaki ZX-9R Ninja how to replace the clutch


Hi, Gummi1 for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
How To install Clutch Kit KawiForums Kawasaki Motorcycle Forums
Clutch kit replacement Kawasaki Ninja ZX9R
http://serwer.robert.webd.pl:30/manual/Kawasaki_ZX_9R_(ZX900_C1,D1)_98_Service_Manual_ENG.pdf
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Apr 03, 2010 | 1999 kawasaki ZX-9R Ninja

1 Answer

1997 Kawasaki ZX-9R Ninja turn signal relay location


Hi, Hodges85 for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
1997 Kawasaki ZX 9R Ninja turn signal relay location Google Search
http://kawasakiworld.com/zx-9r/7090-stock-flasher-relay.html
Kawasaki Ninja ZX 9R Service Manual
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Mar 27, 2010 | 1997 kawasaki ZX-9R Ninja

Not finding what you are looking for?
1999 kawasaki ZX-9R Ninja Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4903 Answers

yadayada
yadayada

Level 3 Expert

79865 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...