Question about 2007 Yamaha Ybr 125

1 Answer

SIDE PANEL REMOVAL

SEAT AND SIDE PANEL REMOVAL

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Yamaha Master
  • 40,026 Answers

Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Yamaha YBR125ED Owner Manual
OEM parts for Yamaha
Yamaha YBR125ED 2005 Service Manual
Taking the seat off YBR125

Posted on Dec 06, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the location of the fuel pump driver module on a 2001 mercury cougar


This module is located behind the interior side trim panel, LH side behind the front seat, below the rear LH side glass. AKA B Pillar trim panel. Access from inside, probably will require removal of the rear seat bottom and even top of seat to remove the panel. it will be the small box in the center of that area once the panel is removed. Good luck!

Sep 20, 2014 | 2001 Mercury Cougar

1 Answer

Battery removal


it might be under the seat or behind a side panel ! lift the seat first and you should see which !

Dec 19, 2013 | 1995 Yamaha XV 535 Virago DX

1 Answer

Rear seat removal


Not knowing if you car is a sedan, a van etc..... If it is a sedan, there are two different solutions. Solution #1: Look near the junction where the bottom of the seat meets the vehicle base and on each side, you will find a hex bolt. Remove these 2 bolts and setr aside. Grab the bottom of the seat and lift. It should come out easy.
Solution #2: If there are no hex bolts, crouch in front of back seat in the foot well, one side at a time. Use the side of your upper leg and push against the seat towards the back. It should unlatch one side. Repeat for the other side. The seat will lift easily for removal. Reverse the process for installation of seat.
Good luck. Sorry, you did not post what kind of vehicle you have!!!

Mar 24, 2013 | Cars & Trucks

1 Answer

Vespa px side panels


the newer PX have the side cover latch under the seat
- see picture
vespa-px-side-panels-wrvo0vnsxenp22qrsalmbzkb-3-2.jpg
the older ones have them at the lower front of the side covers
- see picture
vespa-px-side-panels-wrvo0vnsxenp22qrsalmbzkb-3-5.jpg

Jun 03, 2012 | 2008 Vespa PX125

2 Answers

My automatic seatbelt doesnt work anymore. i have a 1990 accord lx 5-speed and it used to get stuck have way and know it wont recline at all. is it a bad fuse or the computer? i disconnected the seatbelt...


If both passengers and drivers side retractable belts have stopped moving, then it's likely the controller that's located under the passengers seat has gone bad. If only one side has stopped retracting and moving then that side motor has probably gone bad.

Sep 15, 2011 | 1990 Honda Accord

1 Answer

Attempting to remove plastic molding around passenger rear vent motor, having difficulty. any help would be appreciated


This is more difficult than it looks because the rear trim panels must be removed in a certain order as they overlap at their edges.

First remove the rear seat.
Remove the step panel from the floor near the side door opening.
Unbolt the 2 seat belt anchors.
Remove the trim panel below the lift gate (rear hatch opening.) Pry the screw plugs out with a small screwdriver and remove the screws.
Pry out the rear speaker grill using a flat blade screwdiver that has been taped to prevent scratches.
Remove the rear speaker mounting screws. Pull the speaker out and unplug the connector.
Remove the passenger side trim panel mounting screws.
Use a panel clip removal tool and pry the clips that hold the trim panel then lift the panel away.

Installation is the reverse of removal.

Apr 07, 2011 | 2002 Honda Odyssey

1 Answer

Remove front seat


SECTION 501-10: Seating 1998 Escort/Tracer Workshop Manual REMOVAL AND INSTALLATION Seat —Front Removal
NOTE: Driver side seat shown, passenger side seat similar.
  1. Slide the seat to its rearward position.
  1. Remove the front seat track to floor front bolts.
  1. Slide the seat to the forward position.
  1. Remove the front seat track to floor rear bolts.
  1. Disconnect the safety belt warning indicator switch electrical connector.
  1. Remove the front seat.

Dec 06, 2009 | 1998 Ford Escort

1 Answer

I need to replace a rear seat belt in a 1997 Ford Tarsus. Does any know the best way to access the assembly? In addition, are there any diagrams available that show the connection points?


please don't forget to rate, thx.

Retractor and Tongue—Sedan
SPECIAL SERVICE TOOL(S) REQUIRED Description Tool Number Safety Belt Bolt Bit T77L-2100A
NOTE: Safety Belt Bolt Bit T77L-2100-A should be used for safety belt removal and installation.

Removal
  1. Remove rear seat cushion. Refer to Section 01-10 .
Seat Cushion, Rear Sedan
Removal
  1. Apply knee pressure to lower front portion of the rear seat cushion. Push rearward to disengage rear seat cushion pad and frame (600A88) from rear seat cushion front retainers (63370).
  1. Remove rear seat cushion from vehicle.
  1. Remove rear seat back. Refer to Section 01-10 .
Seat Back, Rear 60/40 Split Bench—Sedan
Removal
  1. NOTE: Safety belt bolts do not secure seat back to vehicle.

    Remove rear seat cushion as described.
  1. Fold down back seat and remove two bolts in the center of each seat back striker plates.
  1. Remove two bolts from outboard rear seat back frame retaining brackets.
  1. Lift seat back up and pull forward to remove from vehicle.
  1. Remove panel (52018) and quarter trim panel (31012). Refer to Section 01-05 .
Trim Panel, Quarter—Sedan Removal
  1. Remove rear seat. Refer to Section 01-10 .
  1. Pull up on rear section of rear door scuff plate that overlaps lower quarter trim panel.
  1. Pull lower quarter trim panel away from body.
  1. Remove safety belt retaining bolt.
  1. Feed safety belt through lower quarter trim panel.
  1. Remove safety belt anchor plate-to-sill bolt from quarter panel.
  1. Remove retractor anchor nut and retractor from rear quarter panel.
  1. Remove upper seat belt anchor bolt and anchor from upper rear quarter panel.
  1. Slide anchor plate end of safety belt through the openings in the quarter trim panel.
  1. Remove outboard front safety belt retractor and tongue (611B08) from the vehicle.


    2a6fac0.gif


    Item Part Number Description 1 386277-S190 Bolt (Part of 611B68) 2 31012 Upper Rear Quarter Trim Panel 3 611B60 Retractor and Tongue 4 N800937-S190 Nut 5 389370-S190 Bolt 6 — Rear Quarter Panel (Part of Body) 7 52018 Lower Rear Quarter Trim Panel 8 — Mounting Stud (Part of Body)
  1. Remove seat belt anchor bolt and retractor and tongue from rear deck panel.


    fff90b0.gif

Installation
  1. To install, reverse Removal procedure.
  1. Make sure the safety belt webbing is not twisted. If it is, remove the twist.
  1. Tighten retractor anchor bolt and safety belt anchor plate-to-sill bolt to 34-46 Nm (25-33 lb-ft).
  1. Check the restraint system for proper operation.

Jun 30, 2009 | 1997 Ford Taurus

1 Answer

Battery removal


Unlock the left hand seat lock, lift up the lock, inside is a small lever, depress this and seat will come off. To access the battery after seat removal there are three (3) pan head bolts holding on the side panel remove these carefully and this will allow full acces to the battery.

Jan 19, 2009 | 2004 Honda STX 1300 Pan European

1 Answer

'86 Prelude Si Interior Panel Removal


I did this the other day. I think there were 1 or 2 screws holding it in place that you have to remove the bottom part of the back seat to get at them.

Aug 21, 2008 | 1986 Honda Prelude

Not finding what you are looking for?
2007 Yamaha Ybr 125 Logo

Related Topics:

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...