Question about 2010 TGB Bullet 50

Open Question

Headlight bulb remove change - 2010 TGB Bullet 50

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I get to the front headlight to change it


Re: Replace headlight bulb

  1. INSTALLATION GUIDE:
  2. BMW E38 99-01 HID TYPE 7 Series 1PC Halo Amber Projector Headlights
  3. Parts Identification:
  4. Projector Headlight
  5. Halo & L.E.D.
  6. Bottom of the Headlight:
  7. Ballast Bracket, Halo Wires(red/black)
  8. Turn Signal Adaptor
  9. TOOLS REQUIRE
  10. 10mm - 8mm socket
  11. Philip Screwdriver
  12. Crimper/Pliers
  13. For more information about how to install your vehicle, come visit our youtube page on
  14. http://www.youtube.com/spyderauto
  15. Remove the facotry headlight from the BMW. First remove the front panel cover below the headlight to access the bottom screw of the headlight housing. There is also two screws on the top of the housing.
  16. Once you have remove the headlight, turn the headlight around and remove the bracket that holds the Ballast. Then remove the ballast using a philip screwdriver.
  17. Unplug the wire from the ballast, and then remove the Xenon Plug from the housing. Put the Ballast aside.
  18. Carefully remove the D2S Xenon Bulb from the factory housing. Once you have remove the bulb, transfer the bulb to the Spyder headlights.
  19. Remove the bracket from the Spyder Headlight, and then install the ballast on the housing like the original. Once you have put the ballast on, put the bracket back on.
  20. Remove the Panel Cover bracket from the original headlight to the new Spyder Headlights as shown here.
  21. STEP:
  22. Install the Spyder turn signal socket if the orignal does not fit, unplug the factory plug from the harness and plug the new one on.
  23. Install the Spyder Headlight back on to the vehicle. Plug the Harness back on, the halo/L.E.D. Wires is connect to the Parking lights. These wires are optional to your vehicle, you do not have to wire them together.
  24. Factory Xenon Headlight
  25. Spyder Projector Headlight using Factory Xenon Lights
  26. STEP:
BMW e46 HID Headlight Replace
get-front-headlight-change-afy5cnsznmokzumyhdcbeseq-5-0.jpg

get-front-headlight-change-afy5cnsznmokzumyhdcbeseq-5-2.jpg

Nov 22, 2012 | Cars & Trucks

1 Answer

My car 2003 altima I need change light bulb. need know how to remove head light to change the bulb.


You don't have to remove the headlight to change the bulb. The bulb can be removed from the back of the headlight, usually by turning the bezel ring that holds the bulb onto the headlight housing. Just make sure you do not touch the glass part of the bulb while replacing it or it will burn out again fast.

Jan 27, 2011 | 2003 Nissan Altima

1 Answer

Need to replace headlight lens on a 1996 dodge avenger


Usually, one has to get the entire headlight assembly to replace the lens.
Is it cracked?
If it is just faded, try some anti-haze polish for headlights. This can save you some money compared to restoring the headlamp by replacing the assembly (which may be available from a salvage yard).

---
REMOVAL & INSTALLATION

CAUTION
Halogen bulbs contain gas which is under
pressure. Handling the bulbs incorrectly could cause it to shatter into flying
glass fragments. Do NOT leave the light switch ON. Always allow the bulb to cool
before removal. Handle the bulb only by the base; avoid touching the glass
itself. Whenever handling a halogen bulb, ALWAYS follow these precautions:

  • Turn the headlight switch OFF and allow the bulb to cool before
    changing it. Leave the switch OFF until the change is complete.
  • ALWAYS wear eye protection when changing a halogen bulb.
  • Handle the bulb only by its base. Avoid touching the glass.
  • DO NOT drop or scratch the bulb.
  • Keep dirt and moisture away from the bulb.
  • Place the used bulb in the new bulb's package and dispose of it properly.


Cirrus, Stratus, Sebring Convertible and Breeze


  1. Open the vehicle's hood and secure it in an upright position.
  2. Disconnect the negative battery cable.
  3. Remove the 2 screws securing the headlight module to the radiator closure
    panel.
  4. Pull out the headlight module from the vehicle.





    Fig. 1: Using a Torxhead screwdriver, remove the 2 headlight
    module retaining screws
    90906p69.jpg






    Fig. 2: Pull the headlight module straight out of the front of
    the vehicle to remove the bulbs
    90906p70.jpg






    Fig. 3: Disconnect the wiring harness for the headlight bulb
    90906p74.jpg






    Fig. 4: Turn the light bulb retaining ring counterclockwise,
    and remove it from the back of the module
    90906p75.jpg






    Fig. 5: Pull the light bulb out from behind the module. Never
    touch the glass of the light bulb
    90906p76.jpg



  5. Detach the headlight electrical connector.
  6. Remove the retaining ring holding the bulb to the back of the headlight
    module.
  7. Pull the bulb from the back of the headlight module. Hold the bulb by its
    base only; try not to touch the glass itself.
    To install:

  8. Holding the bulb by the base, place it in the headlight module, then secure
    with the retaining ring.
  9. Attach the electrical connector to the bulb.
  10. Install the headlight module into the vehicle and tighten the 2 retaining
    screws.
  11. Connect the negative battery cable and check the headlight operation.


Sebring Coupe and Avenger


  1. Open the vehicle's hood and secure it in an upright position.
  2. Disconnect the negative battery cable.
  3. Remove the sealing cover by rotating it counterclockwise.
  4. Remove the bulb attaching spring and pull out the light bulb.





    Fig. 6: Remove the headlight sealing cover(s)
    90906g28.gif






    Fig. 7: Remove the attaching spring and pull out the bulb
    90906g29.gif

    To install:

  5. Install the bulb into the headlight module.
  6. Install the bulb attaching spring.
  7. Install the sealing cover.
  8. Connect the negative battery cable and check the headlight operation.


prev.gif next.gif

Oct 07, 2010 | 1996 Dodge Avenger

1 Answer

How do you remove the headlight bulb


1. Remove headlight unit
2. Disconnect headlight leads
3. Remove bulb cover
4. Remove headlight bulb holder
5. Remove headlight bulb
6. Install new headlight bulb - DO NOT TOUCH THE GLASS PART OF THE BULB!
7. Install headlight bulb holder
8. Install bulb cover
9. Connect headlight leads
10. Install headlight unit

I'm not aware of any shortcuts, nor do I believe that any steps could be changed or eliminated without re-engineering the headlight unit.

Jun 06, 2010 | 2008 Yamaha Royal Star Venture

1 Answer

Change the headlight bulb


Most head light buckets have a couple screws on both side and they need to be removed before you can pull the headlight ring and bulb.

Nov 28, 2009 | 2002 Honda VF 750 C Magna

1 Answer

I need to change the low beam headlight bulb


  1. Remove headlight mounting bolts and nut
  2. Remove assembly
  3. Install headlight assembly (with new bulb)
  4. Replace/tighten headlight mounting bolts and nut
e2ac826.gif


Oct 30, 2009 | Hyundai Motor 2003 Elantra

1 Answer

How do I change headlight bulb . Left side low beam headlight bulb is blowed . I have the new bulb and just need to know where the lever or turn object is to remove from the back side so I can change the...


Reach beind the headlight and just unscrew the cap that holds it in. However don't touch the new bulb with your bare fingers or you will drastically shorten the life of the bulb.

Oct 16, 2009 | 2003 Chevrolet TrailBlazer

1 Answer

Change headlight bulb


Removal & Installation Bulb Replacement To Remove:
  1. Release the spring clip and remove the protective cover from the rear of the bulb.
  2. Disconnect the electrical connector from the bulb.
  3. Remove the spring clip and remove the bulb from the headlight housing.
To Install:
CAUTION
Do not touch the glass portion of the new bulb with bare hands.
  1. Insert the bulb in the housing.
  2. Secure the bulb with spring clip.
  3. Connect the electrical connector to the bulb.
  4. Install the protective cover on the headlight assembly.
Headlight Assembly

Jul 16, 2009 | 2004 Volkswagen Jetta

2 Answers

How to change headlight bulb on ford mondeo


Very easy, 2 or 3 minutes.
Remove radiator grille. 2 plastic fittings on top, quarter turn and lift out grille.
Remove complete headlight. Simply lift out 2 L shape retaining pins. Disconnect lead. Ease out complete headlamp unit.
Remove back of headlamp unit to access bulbs. Disconnect lead from bulb while bulb still held by clip. Then release clip to remove bulb.
Reverse process to fit.

Jan 02, 2009 | 2001 Ford Focus

2 Answers

How do you change the right front headlight bulb on a kia sedona


Remove the headlight assembly. Just remove the 3 bolts with a 10 mm socket and pull it out so you can disconect the wire harness. After that pull the whole assembly out and unscrew the bulb cover. The bulb is held in with a spring clip.

Dec 25, 2008 | 2003 Kia Sedona

Not finding what you are looking for?

Open Questions:

2010 TGB Bullet 50 Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top TGB Experts

Nicola Conroy

Level 3 Expert

1381 Answers

adam bikedoc

Level 3 Expert

661 Answers

Ken Bangerter

Level 2 Expert

34 Answers

Are you a TGB Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...