Question about Yamaha YZF-R1 Motorcycles

1 Answer

Indicators not working fuses ok - YZF-R1 Yamaha Motorcycles

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Yamaha Master
  • 40,632 Answers

Hi, Anonymous before diagnosing any turn signal/running light/parking light issue make sure the bulb is good and the light fuse has continuity with a test light. If you have replaced you OEM lights with LED lights you are going to need a load equalizer. If no turn signals work the cause could be a faulty turn signal module or the connector going to it, look for corroded, loose, or broken pins/sockets. Contact spray cleaner is great for removing corrosion. If your speedometer does not function properly it will have to be fixed first because your turn signal module gets the data from the speedometer for normal turn signal function. If your front turn signals don't work use a test light to check for power and ground at the bulb socket, then start backtracking the wiring through every wire connector to the turn signal switch/button and check for continuity, go all the way back to the fuse if necessary to find the cause of the malfunction. If your rear turn signals don't work check your rear fender wiring harness connector first for corroded, broken, loose pins/sockets, power, and a good ground, (the harness connector is usually located under the seat on the front of the rear fender) then keep tracing the wiring look for obvious harness damage caused by the rear tire. If you still can't find the malfunction backtrack from the rear fender wiring harness connector. If one side does not work you could have a faulty turn signal switch or module check for continuity. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
2005 R1 indicators stop working
http://www.r6-forum.com/forums/73-south-west/154896-help-turn-signals-not-working.html
https://r1videos.files.wordpress.com/2011/04/2002-2003-yamaha-r1-service-manual.pdf
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Posted on Aug 18, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

DRL dashboard indicator and headlight indicator lamps not working


Probably the bulb for the indicator. There is no I separate fuse.

Oct 24, 2016 | Subaru Cars & Trucks

1 Answer

L/h/r indicator not working on 59 plate Peugeot partner van.


The rapid blink indicates the system has lowered resistance because a bulb circuit is open.

Jun 21, 2016 | Peugeot Cars & Trucks

1 Answer

2007 1.4. Why don't electric mirrors work?checked fuses none blown,indicators working ok


Check your fuse diagram in all your fuse boxes. Locate the one for the mirrors and verify if the fuse is blown or not. That's where I would begin.

Aug 30, 2015 | Volkswagen Golf Cars & Trucks

1 Answer

Opel Corsa Utitilty 1.4i right indicators don't work even after I changed the globes


If the lamps and bulbs are ok I would initially suspect the hazard warning light switch, then the indicator switch, the multiway connectors and then the wiring.
There is generally only one fuse for the indicators and as one side is working it can be assumed power is reaching the indicator circuit.

Feb 01, 2012 | Cars & Trucks

1 Answer

Turn signal not working


Press the Hazard switch on and check the turn indicator lamps. Replace the faulty lamps.
If the hazard lights do not work then the trafficator flash can is faulty provided the trafficator fuse is OK.
Check the fuse for the turn indicators, if it is blown the replace the fuse.

Dec 11, 2011 | 2002 Kia Rio

1 Answer

Front drivers indicator not working front drivers


The front bulb is blown and needs replacement.

Jun 29, 2011 | 1996 Audi A4

1 Answer

No power .....was watching a movie n it just cut off and want come back on ...


No indicator light of any sorts? If you do get some indicator light then you only have the 5v standby circuit working, power supply will be the first place to look, see if the fuse is OK (fuse will be OK if you get any indicator lights)

Nov 01, 2009 | Televison & Video

1 Answer

No turn single, all fuses check ok


hi, if all the fuses are ok and you have no indicator lights at all then the problem is going to be the indicator relay this is either located in the fuse box or under the dashboard it is what you hear clicking when the indicators are working ok now they put them in different places on all cars some makes its in the fuse others it under neath the dashboard usually behind the cowling covering steering coloumn if you purchase one first you will then know what you are looking for they just push in and pull out so are easy to replace.
If you ask them at the place you buy it from they should be able to give you a good idea where this is located.
It looks like a square box about the size of a match box they are different colors once you have replaced this you should have all the lights working.
Hope this is some help tp you let me know if you need further assistance ok

Aug 05, 2009 | 1995 Mercedes-Benz E-Class

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...