Question about kawasaki ER-6f Motorcycles

Open Question

Drives fine in high revs low revs very jumpy lacking power

Feel like not getting enough fuelin low revs

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3567 Answers

SOURCE: Lack of power and low revs

Remove and clean the carbs. Remove and clean the fuel petcock water trap then put everything back together. Try the bike now.
If still bad then take it to the shop and ask for a compression check. You may have some burned valves.

Posted on Mar 19, 2009

asemechanic
  • 85 Answers

SOURCE: bike has a flat spot runs fine on low revs and

needs carbs synced possibly jetted you have a fuel issue

Posted on Feb 27, 2011

Testimonial: "its what i thought it was but was,nt 100per cent certain thanks alot"

emissionwiz
  • 75822 Answers

SOURCE: no power at full throttle, have done carb,power

How do you know this is not a mechanical problem with the engine, the car is pretty simple, I assume you have verified the carb slider valve is free moving?

Posted on Feb 10, 2012

  • 1 Answer

SOURCE: dt 230 low on power.bike gets half revs then runs

Hi there, you likely still have the restrictor in the exhaust header. Mine was the same, they are shipped like that as standard. Take the exhaust off the engine and remove the the concentric tube that's in there (you need to cut it out). Instant +100% power, if that is your problem.

Posted on Mar 05, 2012

clarkie_2k6
  • 1 Answer

SOURCE: why does my DT125 splutter at hight revs

had the same problem, all i needed to do was change the sperk plug! nearly stripped the bike right down aswel!

Posted on Oct 27, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 F550 V10 lacks power


Sounds like a problem with the transmission. Your problem could be caused by a number of things related to the tranny but I would try change the Trans fluid and filters first. Costs around 100 at your local transmission repair shop.

Nov 30, 2016 | Cars & Trucks

1 Answer

My ed falcon 5.0l runs but won't rev & lacks power Have replaced air flow meter as it runs better with it did connected Checked computer for damage & condensation & foreign debree But can't find the...


have the fault codes read as it may be a combination of faulty sensors causing the problem. The ECM fault reporrting process is there for a purpose and that is to pinpoint the fault and to save money.

Jan 24, 2015 | Cars & Trucks

2 Answers

Lack of power with high rpm


Transmission is slipping. Check fluids and filter and service.

Nov 08, 2013 | 2002 Chevrolet S-10

2 Answers

The car lacks power when driving it idles fine and revs up but as soon as you put it into gear it lacks power and holds back have replaced plugs, leads, coil pack, checked cat converter not blocked


it may not be getting enough fuel,injectors might need cleaning or could be a problem with fuel pump or filters.....hope this helps.....cheers.

Jun 28, 2011 | 1999 Daewoo Lanos

1 Answer

Lack of kick down and sluggish


clean out the tank when on high revs it collects all the rubbish from the bottom

Dec 28, 2009 | 2000 Jaguar S-Type

1 Answer

Car was sittin for a while. With new battery all charged and electrical good. My car has no power. especially after a complete stop. I drove it the required time after the recharge. I was going to take it...


There are many reasons for a lack of power. If there's a lack of power only when the engine is warm, I'd lead toward the catalytic converter which would impact power if clogged. It gives a sulphur-like smell in the exhaust as well as it would get extremely hot. If this is not the case, the fuel injectors or fuel filter could be clogged. Dirty spark plugs could lead to a lack of power as well. Another cause would be transmission problems. If you notice high RPMS and little power, the transmission could be slipping due to low fluid (if automatic). If it's a manual transmission, there might be a clutch issue which also would allow the car to rev really high with little acceleration. Lastly, check under the hood for any possible vacuum leaks. Sorry for the long answer but based on your question, until you can rule a few things out, there remains a lot of possibilities.

Aug 13, 2009 | 2000 Toyota Corolla

1 Answer

Engine revs high then low then stops


check the governor lever. it prob sticking or gone.

Aug 04, 2009 | Toro Lawn Mower With Toro Power Tools

1 Answer

Lack of power and low revs


Remove and clean the carbs. Remove and clean the fuel petcock water trap then put everything back together. Try the bike now.
If still bad then take it to the shop and ask for a compression check. You may have some burned valves.

Mar 16, 2009 | 2004 Suzuki VL 125 Intruder LC

1 Answer

High engine rev low


I would suggest an automatic transmission flush before I did anything else.

Dec 26, 2008 | 1998 Toyota Camry

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...