Question about 2000 Aprilia RSV Mille SP

1 Answer

Wont start maybe the timing or the shims

Can you download the manuel

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,567 Answers

Go to this site and you can download a free PDF service manual.
http://www.carlsalter.com/motorcycle-manuals.asp Most of the manuals are in English but some are not. There is no way to be sure without doing the download. You can always delete it if in a foreign language. There is also a parts manual I suggest that you download.

I checked and there are several manuals there. One shows to be a 2002 manual. That should be 95% the same as the 2000 manual. The major mechanics don't change as a rule, just the trim and a sensor or two.

Could I get a top rating on this answer? Thanks!

Posted on Jun 04, 2009

  • 1 more comment 
  • tombones Jun 11, 2009

    Could you take just a moment and rate my answer on your manual download question? I answer questions for free and really like the feedback. A "very helpful" rating would be great. Thanks!

  • bmwK
    bmwK Oct 20, 2013

    Server Error 500 - Internal server error. There is a problem with the resource you are looking for, and it cannot be displayed. 1e 10 Server.MapPath() 8 21 error ' 13 ASP 0173 : 80004005 8 ' 1f 16 Invalid Path Character 7 1f b /verify.asp 7 21 , line 2 29 7 1f 50 An invalid character was When I go for downloading the manual something wrong happends; this is the information that apears:pecified in the Path parameter for the MapPath method. 8 1 0

  • bmwK
    bmwK Oct 20, 2013

    Thanks a lot for your help, do you have any suggestion?

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why won't it start?


did you replace it with a new starter or a wrecker starter, maybe a bad starter. check the teeth on the flywheel they maybe damaged causing the starter not to engage. you may have to shim the starter. were there any shims when you pulled the original starter off.

Jul 27, 2015 | 1988 Chevrolet Cavalier Z24

1 Answer

I put a brand new starter in 93 f150 but when i start it sounds like its not fully releasing,do i need shims?did i get one for a manuel trans by mistake?


Sounds like u got the wrong starter remove it and measure against the old 1 , bench test the new 1 make sure the cog returns etc

Jan 24, 2015 | Cars & Trucks

1 Answer

How do you install camshafts on a 2014 Harley davidson vrscdx


To be honest with you , if your gonna attempt to change your cams , your gonna have to replace the shims and measure each one correctly and there not as easy as a normal twin cam. Its alot of work that needs to be done right the first time .Do not buy knock off manuel , but the actually harley manuel for your bike. the clymer manuels are garbage, yeah there cheap but thats what you get for cheap. Im not sure what your mechanical ability is but if its your first time on a vrod and have replaced overhead cams and shimming the valves and measuring the correct clearences and have the special tools for doing it. i would recommend someone that has actually done them to be with you. Just being honest with you .

Oct 04, 2014 | Harley Davidson Motorcycles

2 Answers

Smoking starter


when mounting a chevy starter you must shim it down so it wont lock up when the bendix hits the flywheel..if it binds up it will burn up..there are different thicknesses of shims that fit between the block and the starter nose cone..use one or a combination of these to shim down enough that it wont drag..shim too far and it will spin out..I have owned chevys for years and have yet to see one that did not need shimmed down..these shims fit over the mounting bolts on the starter..

Dec 27, 2013 | 2004 Chevrolet Malibu

1 Answer

2003 yamaha 250yfm valves are noisey and started


Valves are adjusted by changing the the shims to thicker or thiner ones.
measure all the clearances and write them down, remove the cams and remove the cam buckets of the ones that need adjustment. Note the sizes of the shims removed( it is etched onto them) and replace with different thickness shims to bring them back into tollerence.

Make some marks and notes on the cam timing before removing cams,even take a photo(or that will be your next question) .
valve clearances usually close up( dont get noisy) and valve clearances wont make it smoke, so there may be more maintenance to do, like a cam chain and rings. Im not certain about a yfm, but you posted with a picture of a 2 stroke which doesnt have valves to adjust

Jun 20, 2010 | 2003 Yamaha YZ 250

1 Answer

It died yesterday, I then had a new alternator install. Worked great for the 1hr dr home. Then started it up this morning and took off and about 2 miles away it just stopped at the stop light. When I go to...


MOST OF THE TIME WHEN YOU HEAR STARTING GRINDING NOISE CHECK MAKE SURE STARTER BOLTS IS TIGHT NOT LOOSEN OR MISSING ONE.CHECK STARTER DRIVE GEAR AND FLY WHEEL FOR BROKE OR DAMAGED TEETH.IF ALL LOOKS GOOD STARTER NEED SHIMMING.YOU CAN BUY STARTER SHIMS AT AUTO ZONE OR ADVANCE AUTO PARTS.

Feb 07, 2010 | 2001 Ford Focus

1 Answer

I have an 04 RMZ 250 I just re-shimmed the valves and put a new piston in and bike was running great started first kick road it all over the street and golf course. went on ONE ride in the heat and...


sounds like maybe valves were shimmed too tight,check service manual for clearances...better a little loose than too tight,can cause alot of damage to cam & head,be careful!!

Sep 29, 2009 | 2004 Suzuki RM-Z 250

1 Answer

How to re-shim zxr750 j1


take the valve cover off make sure the the cylinder that you are workin on is at top dead center compressionor the nose of the cam facing up.. you will have to get the shim specs from the manuel... make sure when you shim, that you shim it to the middle of the spec range

Aug 18, 2009 | 1990 kawasaki ZXR 750

Not finding what you are looking for?
2000 Aprilia RSV Mille SP Logo

Related Topics:

235 people viewed this question

Ask a Question

Usually answered in minutes!

Top Aprilia Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4535 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you an Aprilia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...