Motorsports Logo

Related Topics:

Charles Troutman Posted on Jan 30, 2014

Oil light 2006 hyundia sonota

Oil on engine noise oil light off no noise

1 Answer

jimsueness

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 3 Answers
  • Posted on Apr 27, 2014
jimsueness
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Mar 24, 2010
Answers
3
Questions
0
Helped
949
Points
5

The engine noise indicates that the oil light is not lying to you- there is a loss of oil pressure. Make sure the oil level is full. If the light comes on when making severe maneuvers or braking, the oil may be flowing away from the pickup tube in the oil pan. The oil pan may need to have a baffle in it to stop the oil slosh. Otherwise, if the light stays on for more than a few seconds, the pickup screen may be plugged with muck or sludge. If the oil light and noise happen after the car has gotten fully warm (like after freeway driving) it could be excessive wear in the oil pump or engine bearings.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Can the tappets be adjusted on a Hyundia Tucson 4 x 4 V6 ,2.7 petrol engine?

Not normally, if they are noisy you can try a heavier oil in the engine.

A 10-40 vrs a 10-30 and change the oil at 5000k religiously.

or you add an oil additive to knock down the noise.

eventually you will have to replace the tappets.
you may want to pull the valve covers and verify all valve rockers are torqued correctly -- looseness hear can create noise.
0helpful
1answer

What does code P1154 mean on a hyundia sontona 2002

You sure that's the right number?
For Hyundai, it shows codes 1151 and 1155, both referring to the electronic throttle system (ETS). I did not find a code P1154.

P1151: ETS Main Accel Position Sensor 2 Malfunction.
P1155: ETS Limp Home Valve.
P1174: Electronic Throttle System #1 Close Malfunction.
0helpful
1answer

Engine started making ticking noise, checked oil ....very low. added oil, same, added marvel mystery oil, same thing. need an engine job?? 2008 huyandi sonota 4 cyl.

the ticking noise could be the rockers and the clearance may need to be checked and possibly adjusted.you should get the oil pressure checked with a gage to make sure its not an oil pressure problem.and start getting your oil changed on a regular basis as this is the most common problem for engine problems and failure and its the cheapest most cost effective maintenance.
0helpful
1answer

2006 hyundia sonota - how many miles between oil changes would be recommended it has 63,000 miles on it.

It is recommended evey 3000 miles. It can go further though. I usually go 5000.
0helpful
1answer

My sonota is making a weird engine noise. Its not oil, i just changed it. What might be some possibilities?

Put some bar shop on the fan belt and the start it and let it run and see if it is still making the noise.
0helpful
2answers

Need engine oil capacities for a 2.7L Hyundia

Lubricants and capacities
Engine oil options
Ambient temperature range Cold climate
Engine oil grade SAE 5W/30
Engine oil classification API/ACEA SJ/A2
Ambient temperature range Moderate climate
Engine oil grade SAE 10W/30
Engine oil classification API/ACEA SJ/A2
Ambient temperature range Moderate climate alternative
Engine oil grade SAE 10W/50
Engine oil classification API/ACEA SJ/A2
Ambient temperature range Hot climate
Engine oil grade SAE 10W/40
Engine oil classification API/ACEA SJ/A2
Engine with filter(s) litres 4,5
0helpful
1answer

What type of engine oil is best for a hyundia sonata

Check you owners manuel, if you dont have one look on the oil fill cap, many will have it written on it, if its call your local dealership and get an owners manuel, and ask them what type of oil is recomended.
0helpful
1answer

Noises coming from th left frontwheel of my 2000 hyundia sonota could this be a hub and bearing noise

What kind of noises are you hearing? Most likely, you need to replace the brakes. It is very unusual for a 10 year old car to have wheel bearing problems, especially on the front wheels.

A squeal when you apply the brakes or a grinding/dragging noise while you are driving are signs that it is time to replace the brakes.
Not finding what you are looking for?

459 views

Ask a Question

Usually answered in minutes!

Top Motorsports Experts

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66931 Answers

Drerangula Siva...
Drerangula Siva...

Level 1 Expert

6 Answers

Are you a Motorsport Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...