Question about Yumbo Dakar 200 Motorcycles

1 Answer

Starter, starter switch and kill switch not working

.i am sorry to put it under this heading but i could not find it in the listing. the previous owner jump started the scooter with a car charger because of a bad battery. now you can only kick start it and the kill switch does not work. it turned over once using the remote starter button but the starter would not disengage. i installed a toggle switch to use as a kill switch. however the switch for the lights and accessories does work. they turn of with the key but the engine does not. thank you.................ron 2007 bashan 50cc moped i

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 132 Answers

When he jumped it with the charger he probably fan too much curent through the system witch made a relay stick so when you hit the start button it dosnt shut off the kill switch probably went bad because of it also trace the wires from the start button and find the relay that they go to and check it with a multimeeter how they work is it uses a little amount of curent to controle a big amount

Posted on Jun 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Nutral light only comes on when kill switch is up ..and starter is completely dead no noise or anything whats the problem ,fuses are good head lights come on show miles but no start ...help


starter died no noise on a key turn is ALWAYS the starter hit it with medal like a wrench that may do it if not get a starter its one of the easy parts to replace 3 bolts one plug and as long as its not under to many other parts bolts are long and take time to get out when putting bolts back in put all bolts in but dont make tight till all are in then take turns on all bolts until all bolts are tight
25816652-uqs4ujnx0j44oj3ly3bc21no-3-0.jpg

Aug 10, 2015 | Cars & Trucks

1 Answer

My craftsman 25cc leaf blower wont start


pull the plug, plug into wire, touch head of plug to metal on engine. hold by rubber boot while touching pull starter, see if you get a spark across the plug gap, its small but you can see it. if no spark check switch. if plenty of spark clean fuel system and check primer

Nov 04, 2014 | Garden

1 Answer

2004 grand vitara will not start and solenoid will not click, Battery is fine.


Sounds like the ignition interlock at the transmission switch is out of adjustment or faulty. Bypass the key switch, at the starter, if it now cranks, it's in the interlock switch or the ignition switch.

Feb 06, 2013 | 2004 Suzuki Grand Vitara

1 Answer

2007 TE510 electric start not working, kill switch on bars still working, starter motor still good and will crank, still able to kick start. Battery all good. All connections and fuses seem ok, but...


If you are talking about a remote starter ... with a key fob ... what were you thinking when you put this on a dirt bike?

If you are talking about the sart solenoid, jump it with a piece of heavy wire to see if that is the problem.

Oct 04, 2011 | 2007 Husqvarna TE 510

2 Answers

Sometimes it won't start, just clicks. replaced the starter and the battery. power gets to the starter, so don't think it's the ignition switch.


if your power going to starter from ignition switch ,your starter has to be faulty or main wires on starter has bad connection

Sep 07, 2011 | 2001 Suzuki Grand Vitara

1 Answer

1985 model. I replaced battery, was running, now wont start, turn switch hit starter button , get nothing , there is a click from the relay that the previous owner just installed last summer. Lights and...


Check that your Engine kill switch is in the Run position.

Bike must be in neutral (with neutral light showing) to crank starter, if you try starting in gear the clutch switch must be activated (lever in) and the sidestand must be up.

Apr 07, 2011 | 1985 Yamaha XJ 700 X Maxim

1 Answer

You have to jump start the vehicle and when you turn on the head lights it kills the vehicle and u have to jump it again. what could the problem be??? maybe the altenator or maybe the starter??? could it...


week battery or alternator or both. take to shop and get battery load tested ( should be free). if battery ok then its alternator ( test it's output with volt meter, should be over 12 V, more like 14V.

Oct 24, 2009 | 1995 Oldsmobile Silhouette

1 Answer

1982 Suzuki GS850 GL will only run with the starter button held


Obviously the CDI is picking up power from the starter button. Check the ignition key switch for proper operation. Chances are that whatever fried the loom also fried part of the switch. Alternate to that, trace the wire powering the CDI system, disconnect it at the source (starter button connection), then find a power source that is live only when the key is turned on and then hook the CDI wire up there.

an I get a “very helpful” rating on this answer?

Aug 18, 2009 | 1982 Suzuki GS 650 GT

1 Answer

No kill switch


but a photo and instructions would sure help.Are you sure you don't have a yellow? button on the top of the turn signal housing on the left handlebar ? Its kinda hard to press in. edit: sorry I was going from bad memory. Yellow is the horn. The kill switch is grey and on the top/backside of the same signal housing. It doesn't have a lot of off/on feel but if you push it hard enough it works.,,,

Nov 10, 2008 | 2006 Gas Gas EC 450 FSE

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

598 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yumbo Experts

kevin bulsara

Level 2 Expert

234 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Are you a Yumbo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...