Question about 2007 BMW K 1200 R

1 Answer

Replace Clutch I am looking for some instructions on replacing the clutch on my 2007 K1200R. Thanks

Posted by on

  • Z Laws May 11, 2010

    Can I ask for some info? Firstly, why are you replacing the clutch? Has it worn, is it broken?

    What are you looking to replace? The entire clutch assembly, the basket including plates, or just the plates?

    What brought you to the point where you decided replacing the clutch was the thing to do? I am asking because it isn't a procedure you are familiar with, yet you must be familiar enough to have diagnosed a faulty clutch to the point that it needs replacing...

    Can you see where I am going with this? :)

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 26 Answers

You can download an official BMW manual with all you need to know from here: http://www.tradebit.com/filedetail.php/5698630-bmw-k1200-k4x-reprom-factory-service-repair

Posted on Aug 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How can i fix the squeak on the clutch on 2007 crv


Most likely the it is a worn clutch. Replace it as soon as possible before the metal parts start to wear out which can be expensive to fix. All manual cars needs clutch replacement at some point.

Sep 05, 2014 | Honda CRV Cars & Trucks

1 Answer

2007 Chevy Cobalt (5 Speed) will shift through all gears, but won't engage in any.


Well either the clutch or clutch master and or clutch slave. Do you have brake fluid in the clutch master? You must pull out the plunger to look. If you don't, refill and try again. If that doesn't work, you may have to pull the tranny and replace the damaged part and while you are there replace the clutch anyway.

Dec 18, 2013 | 07-10 Chevrolet Cobalt 5 Lugs W Rear Discs...

1 Answer

Looking for a vidio showing how to remove and replace a clutch on a 2007 1200 sportster


It is best to get the manual and follow those instructions. You will need a special tool to compress the clutch spring plate as well. There are several kits out there that include the tool with the clutch plates.

Apr 19, 2012 | 2006 Harley Davidson XL 1200 C Sportster...

1 Answer

Noisey clutch on my 2007 BMW K 1200


Hi, Geoff I just loaned my brand new pair of listening ears to your local dealers chief technician so he could take your bike for a test ride and give you his professional opinion and estimate about your noise and repair cost. For more information about your issue, please visit the websites below. Good luck and have nice a day.
Clutch replacement on BMW K1200GT with wet clutch
BMW K1200R Clutch fluid change wymiana pyn hydraulicznego spr
Bmw K1200 RS GT REPAIR MANUAL
BMW Motorcycle Parts Fiche OEM BMW Motorcycle Parts online 1970 present BMW
http://www.k100.biz/pdf/UM/K1200GT_2007_UM_en.pdf

Nov 22, 2011 | 2007 BMW K 1200 GT

1 Answer

Hey I have a clutch drag problem ..... thoughts ? solutions ?


Hi, Andrew for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary, transport your bike to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.
BMW K1200R Clutch fluid change wymiana pyn hydraulicznego spr Clutch replacement on BMW K1200GT with wet clutch
Bmw K1200 RS GT REPAIR MANUAL
BMW Motorcycle Parts Fiche OEM BMW Motorcycle Parts online 1970 present BMW
http://www.k100.biz/pdf/UM/K1200GT_2007_UM_en.pdf

Nov 17, 2011 | 2007 BMW K 1200 GT

1 Answer

I drive a toyota corolla 2007 face lift model. My car has 61k mileage on it. Oil levels are fine and i done a 60k service on my car. But my clutch is extremely hard. Its the hardest clutch i ever felt. i...


If it has a cable,it may need lubed if it is hydraulic type, it may have binding likage in the bell housing! I,d rather think it has a cable. DOES IT HAVE 2 FLUID CHECKS UNDER THE HOOD,ONE BIGGER ONE, AND ONE SMALLER OR JUST ONE BIG DOUBLE LOOKING CAP, OR LONGER LOOKING RESERVOIR ON A CYLINDER WITH FRONT AND REAR TUBES! THIS IS FOR THE BRAKES! If you see one more then it is for the clutch.

Sep 06, 2010 | 2007 Toyota Corolla

2 Answers

How do i replace my clutch on my 2007 eclipse gt


Hi,

Pls use the below link to download the clutch overhaul guide for Mitsubishi Eclipse

http://tearstone.com/eclipsefsm/21B.PDF

Trust was really helpful to me.

Regards
Kanu

Sep 09, 2009 | 2007 Mitsubishi Eclipse

1 Answer

How do i replace my clutch kit. i burned it out


ello mate,,first drain the oil out,remove the right side lower fairing,,then remove the wot looks like a large circular engine casing,then remove the bolts with springs holding the clutch plates in,,take off the cover then u will see the plates and metal lookin clutch plates,, now take out the clutch plates one at a time,,,ie take one out then place on the bench,take a metal plate out and place that on top of the 1st plate u took out,and so on,, when u have the new fibre plates,,replace back in the bike as u took the old ones out,,ie, new fibre plate 1st then put a metal friction plate back in from your bench,,then a new fibre plate and so on,,each time u replace the new plate ,chuck away the old one,,wen u have done that ,on the clutch plate cover look at the face of the cover u will see a small arrow head or a dot stamped on the face of it,, that dot should line up with a dot thats stamped on the housing where the clutch plates are,put the plate casing on so that the dots line up ,,put the springs and bolts back on and do them up tight,,then replace the engine casing,,,put your oil back in,,if u have a hydrolic clutch u will have to remove the 3 screws and the clutch piston b4 taking the casing off ,,,to read this it will sound complicated m8,, but wen u start the job itl be quite easy,, take your time tho,,any probs m8 ,shout and il anserw u,, ok,, cheers now

Mar 30, 2009 | 2007 Suzuki GSX-R 600

1 Answer

Clutch fried on 2007 Hyundai Tuscon


Yes they are related. I had the same thing happened to me the forks got bend so I had to replace the whole clutch system, clutch cover where the forks are at and the clutch itself. When they replace the clutch plate they should also replace the clutch cover or vice versa. I don't think it's you it's probably just the car. I suggest you have the clutch plate and clutch cover replaced.

Jan 21, 2009 | 2005 Hyundai Tucson

Not finding what you are looking for?
2007 BMW K 1200 R Logo

Related Topics:

404 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Mike Gilbreath

Level 1 Expert

50 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...