Question about 1986 kawasaki ZL 900 A2 Eliminator

1 Answer

Bench start kv 550

I have a 1980 kv 550 and would like the basic wiring in order to start and run the motor on the bench for it is going into my go-kart

Posted by on

  • joeberg Jun 13, 2009

    bench starting a 1980 kv 550 kawasaki\r\nok comming of the crank on the right side we have a y r bl bk going into the ic ignighter

    left of the crank we have 3 yellow g witch is the neutral and bl/r witch is oil going into a rectifier with a black/yellow and brown? and a white/red
    solenoid we have a yellow/red and a black

    coils have a green a black and a yellow/red?

    i think that is all i need had it running but no power dont know how or why

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 24 Answers

Assuming it's a KZ550, first off, your gonna need the battery, ign module, rectifier/regulator, and ign. coils. There should be a wiring harness (5 wires or so) coming from the alt housing (on left crank end) with 2 yellows one pink(to rectifier),red/blk(ign power to cdi) & (light green is neutral light- not needed). Next, assuming there's no points, there should be a 2 or 3 wire harness (usually blue/brown) from ign triggers (on right crank end) these need to go to CDI module. Then make wires from CDI module to coils. Don't forget to ground everything to motor case. Also if it's electric start only, your gonna need the start solonoid ,too. If you want a detailed wiring diagram, let me know what color wires & how many there is on the rectifier/regulator and CDI and the motor and I can email you a diagram.

Posted on Jun 03, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Motor start capacitor burned and melted......


capacitors fail for no apparent reasons
they can last for ever or just days
basically they are two separated plates that energize with positive and negative electrons that form an energy source when the plates are connected switched on but recharge when switched off as in an ac current
quality has little bearing in the issue and the materials used in the construction are varied but they still crack and the insulation ( grey/ black material ) melts out the failure
The have to be in the right capacitance area for the motor they control
there are pages on the net that may help you if you go google and type in -- capacitor construction, application and failures for electric motors --

Nov 14, 2015 | Whirlpool Washing Machines

3 Answers

When you turn the ignition and it clicks but will not turn over and the lights still work what could it be


low battery, battery cables not making secure connection, battery terminals oxidized or needing cleaning/brushing .... failed starter .... tap the starter with a wrench, it can revive it :)

Feb 23, 2015 | 2004 Ford Freestar

1 Answer

Wire 253 holden boat motor starter alternator coil basic diagram


batter positive to one big terminal of the starter solenoid--large wire as in a car ( the other big terminal will have a wire from it going into the starter)
a wire from the start point of the ignition switch to the small terminal of the start solenoid .( This to energize the starter solenoid to start the engine.) a large wire ( 30 amp capacity ) from the positive terminal of the battery going to the BAT terminal of the alternator the plug in the back of the alternator will go to the battery light or ammeter.. wires from the start and run positions of the ignition switch to the coil. One to provide power when the starter is engaged and the other from the run position to provide power to keep the engine running
basic but it will work

Jan 25, 2015 | Holden Cars & Trucks

1 Answer

I have an B-6CB(KS) 6" buffalo grinder, the switch


The neutral line should never be switched--only the hot wire (black). If there are only two wires that went to the switch, you should be able to tie them together and the motor will run when plugged in. The switch should be a common SPST type either toggle or rocker to fit. Hope this helps!

Dec 26, 2010 | BUFFALO 10" Bench Grinder

1 Answer

It hums but won't turn. are there brushes? what is the black canister hooked to wiring going to motor? aloha, chip


Hi Chip , have you tried !!carefully!! turning the grinding wheels whilst the grinder is powered up and humming and does this start the machine , if it does your motor start capacitor ( a cylinder/tube with 2 wires or connectors on it ) will be deffective or the leads might have became detached from it , a replacement capacitor is quite cheap but you must replace it with the exact one ( a motor start/run capacitor of the correct Mfd or uF rating typically 30 uF/Mfd and at the correct voltage 110/220V )
if this dosent fix your problem most likely your motor start windings in the motor field coils are burnt out and the grinder is uneconomical to repair .
hope this helps .

Jan 22, 2010 | Delta Shopmaster 8" Bench Grinder

1 Answer

MinnKota Endura 50 Runs only in high speed in forward and reverse


the coil pack is likely bad especially since you changed the switch. call minkota and get the bench tast info (very simple) and then order and replace the coil pack about 26 dollars. be very careful how you put the magnet assembly back together and mark the position of the case on the outside before disassembly. order a new seal kit and use locktite on the shaft again when reassemling to seal the shaft tube for water. dont run motor uout of the water much as it uses the water to cool the shaft and you can damage the seals. good luck.

Jun 18, 2009 | Minn Kota Endura 30 Freshwater Transom...

1 Answer

Grinder starts and stops on startup


if this is a cap start motor and not a centrifugal start run motor then bad cap is good place to start

Nov 25, 2008 | Wilton 17202 8" Bench Grinder

2 Answers

Grinder won't stay running


The capacitor is easy to change and can be matched once you remove it by any electronics parts house.

Nov 24, 2008 | Delta 23 884 8 Inch Bench Grinder Wheel,...

1 Answer

Bench Test explorer 1998 rear wiper motor


power is wht/or & blk/blu. to make the wiper move both left and right across window, it alternates positive and negative polarity.

Jul 14, 2008 | 1998 Ford Explorer

Not finding what you are looking for?
1986 kawasaki ZL 900 A2 Eliminator Logo

312 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...