SOURCE: 2007 flhx.
The GY/BK wires from the 04 passing lamps plug into a two hole connector from the main harness. the GY/BK wires from that connector become one GY/BK wire that goes to the passing lamp switch. The other wire from the passing lamp switch is Yellow and is spliced in to the Yellow wire that goes to the headlamp bulb. This is not a diagram, but it is pretty simple layout. Hope this helps.
SOURCE: Where is the connector for
You have to put the connector on the battery. When you purchase the Battery tender, it comes with a "pig tail". You put the pig tail on the battery and run it to an inconspicous place. When you finish your ride, plug the battery tender in. Now, if you bought a bike with the tender already on it. Look closely around the edge of the seat for the connector. If you can't find it, you'll have to access the battery and follow the wires to the connector end.
Good Luck
Steve
Testimonial: "Thank you Steve. The bike did not come with a connector, so I will have to add, I appreciate your help"
74 views
Usually answered in minutes!
×