Question about 2005 Qianjiang QJ150

3 Answers

86 moto4 4 wheeler just clicks, won't start, battery full charged

My 86 yamaha moto4 250 4 wheeler will just click when trying to start. battery is fully charged

Posted by on

  • 1 more comment 
  • bradleybrook May 30, 2009

    the motor will not even turn over

  • bradleybrook May 30, 2009

    the motor will not turn over. It just clicks when you push the start button and the battery is fully charged

  • bradleybrook May 30, 2009

    I cann't even push start it

×

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,619 Answers

Hi

It could be rectifier/regulator or ECM (electronic ignition control module), the rectifier will probably be under the seat. It looks like it is made of "pot" metal and has cooling fins. It is usually attached to the frame by two bolts and has a couple of electrical wiring connectors. Disconnect and unbolt. Look at the back of it; it should be a shiny plastic type material. . If you can locate the rectifier on the bike, take it off and look at the back.99.9 % of the time, if it is bad, you will know by looking at the back. You will have to remove it to see this though. You probably won't be able to tell anything from looking at the front. If it looks ok, you may be able to find out how to check it with a ohmmeter/multimeter. If it is bad, it will be bulging, charred, maybe have a hole in it, and have that distinct burnt electrical smell. If so, it has let the "magic smoke" out. A new one will be pricey $200 - $400. Try EBay or used ATV parts websites. I would not think it was the stator. They seldom fail. I could be a bad connection somewhere or loss of good ground for the stator or rectifier. This is harder to find. Take a look at the back of the rectifier.

Please do accept the solution and revert for further assistance.

Thanks
Rylee

Posted on May 30, 2009

  • Rylee Smith
    Rylee Smith May 30, 2009

    Well then taking it to a mechanic will be a good option.



    Please do accept the solution and revert for further assistance.

    Thanks
    Rylee

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

If the starters clicking it should be getting voltage,can you remove the starter??if you can remove the starter and leave the wires on try starting it,if the starter spins off the engine you should try and turn the motor and see if its locked up,if the starter dosent spin off the engine with the wires hooked up you have a bad starter.

Posted on May 31, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 495 Answers

If it\'s a matter of a fuel problem, meaning it\'s turning over but not starting, it could be you need to put a teaspoon of fuel in the carberator.
It happens all the time for me. If I don\'t ride for a few weeks I have to take the compartment off under the seat. There will be a brass colored round cup covering the carberator. Remove the 2 screws holding it down. Pour a teaspoon of fuel in the carberator and try starting it. Sometimes it takes a few times to start. It works for me. Good Luck

Posted on May 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

124 CC four wheeler clicks motor, wont turn over


If the quad has an electric starter and you hear a loud click but the starter motor is not turning the engine there may be a couple of things going on. First charge the battery. Once charged try starting again, if the same symptoms take battery to a motorcycle dealer and ask them to load/drop test it. If they say it's okay, then you may have a mechanical issue such as a sized engine, hydrolically locked piston or other such problems. Most likely your issue is with the battery.

Apr 20, 2016 | Yamaha Breeze 125 Yfa1 Atv Air Intake Lid...

2 Answers

Yamaha 550 vison won't start only making a clicking noise I've had the battery changed full charged and when I hit start it gos dim and clicks once


Sounds like the starter is stuck. Sit on the bike put bike into gear without ignition on a lightly rock bike fowards and backwards you migh hear a loud click or clunk then try starting as normal

Jun 08, 2015 | Yamaha Motorcycles

1 Answer

Why02 yz 250 won't kick or pop start runs while pulling it but dies as it stop rolling?


Hi, Anonymous you may have a faulty cdi or charging coil issue for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Dirt Rider Magazine
98 YZ250 won run
YAMAHA YZ250 LC Owner Service Manual
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

May 16, 2014 | 2003 Yamaha YZ 250

1 Answer

I have a 89 quad runner 250 four wheeler I try to start it just makes clicking noise and also few times I was riding it would t would shut off COMPLETY..plz hlp


you battry is shot. or at least the connections are poor.
tighten the wires to the battery and charge it up.

Apr 17, 2013 | ATVs

1 Answer

Where do i find the alternator on my 1991 yamaha virago 250 i am having problems to me it seems as though the alternator is not charging the battery it is making a buzzing sound when i go to turn her...


Hi, Paula buzzing sounds like a starter relay for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.apriliaforum.com/forums/showthread.php?217303-Buzzing-starter-relay-bike-won-t-start-Relay-and-battery-are-ok-though
VSTAR Starter click then buzzing sound
http://www.groussin.com/multi/XV250.pdf
OEM parts for Yamaha
http://www.starmotorcycles.com/assets/service/manuals/2005/LIT-11626-18-21_1000.pdf

Oct 17, 2011 | 1991 Yamaha Xv 250 Virago S

1 Answer

What battery does my FZR 250 1988 Yamaha need? Ive just bought one without a battery and just wondering what size it needs etc.


Hi, Imabat2 the answer to this question is way above my pay grade for this situation, I would call or visit my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Yamaha FZR 250 Batteries
Yamaha FZR 250 86 94 Motorbike Motorcycle MF Battery CB10L A2 OEM Standard...
https://tisuckpullho.files.wordpress.com/2015/11/manual-fzr-250-exup.pdf
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-fz-owners-manuals

Aug 11, 2011 | 1988 Yamaha FZR 250

1 Answer

Four wheeler wont start. it just clicks


if the 4-wheeler is just clicking when you try and start -- this is a good indicator that the voltage is not high enough to activate the starter,, and the sound that you hear is the solenoid clicking.
try and jump the four wheeler battery with a car battery,, this should give it the power it needs to turn over. as soon as you have the ATV running - ride it around for awhile and let it run and charge the battery, there is also a chance that the battery is going bad and it may be time to buy a new one,, also make sure the generator on the ATV is charging the battery at a voltage of 13.6 to 14.4 volts DC. IF jumping the battery still does not start the machine and it still just 'clicks',, then the solenoid itself could be at fault -- replace it and then try and start..
(( use a bench charger to fully charge the battery and re-install into the ATV and you should be back on the trail in no time at all )).

c...

Jan 26, 2011 | Polaris ATV

1 Answer

Not starting


Hi, Shawnw662 before testing any electrical component in the Starting System it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead acid batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
4. Bank angle sensor needs a reset or is faulty.
5. FOB battery low or dead.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand, clutch, neutral safety switch.
9. Security alarm needs a reset.
10. Starter relay, solenoid, starter have failed or circuit wiring faulty.
11. Starter armature or field coils have failed.
12. Main fuse or circuit breaker may be blown or faulty.
13. The electric starter is working but starter clutch has failed.
14. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
TZR 250 WON START
What Do Check When My Motorcycle Won Start Honda Shadow Forums Shadow...
Yamaha TZR250 1987 Service Manual
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-tz-owners-manuals

Apr 29, 2010 | 1990 Yamaha TZR 250

1 Answer

Replaced starter relay and stater in yamaha 1100 2001 v star


Charge battery to full, start in neutral, still clicks? Bad ground, or bad connection. Jump starter solenoid with screwdriver,etc. if motor turns over the relay is bad. Chaz Moto DC

Jan 22, 2010 | 2001 Yamaha V Star 1100 Classic

3 Answers

Electric Start Wont Work (Four Wheeler)


Solenoid Faulty or loose connections, short out the solenoid on its contacts and see if this throws on the starter motor, other than that it could be brushes inside the starter motor itself. Good Luck , the eti

May 20, 2009 | 1979 Yamaha RD 250

Not finding what you are looking for?
2005 Qianjiang QJ150 Logo

Related Topics:

815 people viewed this question

Ask a Question

Usually answered in minutes!

Top Qianjiang Experts

TEKUSER
TEKUSER

Level 2 Expert

86 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

GQ-ROD

Level 3 Expert

635 Answers

Are you a Qianjiang Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...