Question about 2008 Cagiva Mito 125

1 Answer

Need parts but can't identify model - no markings.

Require to identify model with frame marked D6 M 52431 OM cagiva??

Posted by on

  • 4 more comments 
  • sally_mayall Jun 02, 2009

    no log book, no model markings but wish to restore -

    a cagiva 125cc, galardoni 2 engine. the engine is water cooled and label says 'liquid cooled' and 'electronic ignition'. engraved on headstock;

    D6 M 52431 OM. has twin exhaust from single port.

    RADIATOR, PETROL SENDER REQ'D AND MANUAL! bike blue, approx age 90-91.

  • sally_mayall Jun 22, 2009

    • I now have photos, sorry for the delay.

    • just need to make them smaller as post won't accept them!!

  • sally_mayall Jun 22, 2009


  • ediskrad May 11, 2010

    have you got any pictures of the bike for clarification.cheers darkside

  • ediskrad May 11, 2010

    what parts need replacing

  • Anonymous Mar 15, 2014

    my bisque head doll has the following markings on the back of her neck:
    10 DRGM WSK 1321 25
    What do these marking mean?


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to identify the vin # and OM parts for 1973 Shasta trailer, and/or an owners manual

most trailer numbers are near the hitch ball end of the front..a plate welded in the drawbar which should still have numbers inscribed on it..some trailers have a tag somewhere near the power input on the unit..the acess door where the cords, powerbox and trailer hardware are stored..some have a small plate mounted on the front of the passengers side of the body..did you get a title with it??most states require a title..

Dec 24, 2013 | Cars & Trucks

1 Answer

660 raptor negative battery cable frame end

Hi, Railrides1 doesn't matter anywhere it will reach just make sure the connection is clean and tight and use an external or internal tooth washer in between the cable and frame for more information about your issue and free downloads that you will need please visit the websites below. Good luck and have a nice day.
660 raptor negative battery cable frame end location Google Search
Free Cagiva Motorcycle Service Manuals for download

Jul 16, 2012 | 2002 Cagiva V-Raptor 1000

1 Answer

I have msi-motherbord n1996 -which vga drivers i my surposed to download?the below number is ms-7057 pc desk top

According to MSI official website, A C-Tick mark (see above) may also appear on MSI products that are required to comply with Australian electromagnetic compatibility requirements and radio-communications standards.
It signifies that the product may be legally sold in Australia. Now it requires EMC compliance must be marked with the C-tick logo and ACA supplier code number.ACA supplier code for MSI is N1996. The supplier (in this case is MSI) is responsible for holding a Compliance Folder that contains compliant test reports and a Declaration of Conformity.
This is more about ACA supplier code. According to ACMA (Australian Communications and Media Authority), Supplier Code Number means the number issued to a person by ACA or ACMA upon application for registration to use the compliance marks (A-Tick or C-Tick).
So now you know that N1996 is the FCC identifier code for MSI products. There is no way to identify the correct model number by just referring to N1996 alone. To find the exact MSI drivers, you need to find out the correct MSI model numbers, for example here are few of the correct MSI model numbers/codes, hope you can see the pattern here:
  1. K9N4 Ultra-F
  2. K8M890M2-V
  3. G965M-FIR
  4. NX7600GS-TD256
  5. S300-008US
  6. MP54GBT3
Alternatively, you can try the Free Driver Scanner.

Please copy and past the abo

Dec 15, 2010 | Intel Motherboard

1 Answer

When refitimg a new stator plate an flywheel does the engine have to be at tdc? an how do you know if it is with the head on? wre are the timing marks

Hi, Anonymous sorry you can't find the first and best tool you ever bought for your Cagiva despair not for a mere $0 you can download another one. For more information about your issue and free downloads that you will need please visit the websites below. Good luck and have a nice day.
Cagiva Mito Timing Issues
ignition timing
Free Cagiva Motorcycle Service Manuals for download

Jul 04, 2010 | 2003 Cagiva Mito 125 Evoluzione

2 Answers

I have just aquired an old Cagiva 125 off road bike

The engine number can proove what engine type it is but engines can be changed over the years ,your best chance of finding out more info on the bike is to finf the frame number ,this will give you all the history on the bike ,as its very unlikely the frame has been changed since the bike was made.

Mar 13, 2010 | 1991 Cagiva Mito 125 - Lawson

1 Answer

I have just aquired an old Cagiva 125 off road bike

Try contacting Piaggio who now own cagiva, directory enquires .Piaggio head office please.then give the frame number usually by the steering stem.

Mar 13, 2010 | 1992 Cagiva W 12

1 Answer

Timing belt needs changed

if I had engine number I could supply details,this is the eng model number that is usually on a tag the size of cig pkt,situated in the firewall or inside of bonnet,others are on door pillar. Failing that strip down to the cambelt,see if you can identify marks on cam,crank sprockets and corresponding marks that they align to on block and's good to paint mark the old belt to those marks so you can transfer those to the new belt,it will make timing easier as you have 2 self checks measures. nb:most belts have engine rotation direction printed on it. make sure that idler,tensioner pulleys arent noisey, if model has a silicone tensioner,these are more difficult to set if tensioner pulley swivels to to give more precise info i will really need engine spec/model no. IMPORTANT:when belt on,timed and tensioned,turn over in direction of engine crank 2 complete revolutions of crank pulley-that is 4 rotations of cam(s).all marks should be aligned(sprockets and marks)not always paint marks on belt though.if not aligned patience needed more than bent valves.

May 26, 2009 | 1994 Isuzu Pickup

1 Answer

Can't locate or identify timimg marks. Fitting new cam belt

take the rocker cover off and look om the cam bearing caos or for a flat slot on the end of the cam that has to be level with the heads

May 09, 2009 | 1993 Toyota Corolla

1 Answer

Identifying resistor

look at the location marking on the pc boaed and record the number of the resistor  and then we can find the value of it via schematic /parts list ,also require model #

Oct 04, 2007 | Panasonic PT-53TW53 53" Rear Projection...

Not finding what you are looking for?
2008 Cagiva Mito 125 Logo

Related Topics:

335 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cagiva Experts


Level 3 Expert

75797 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Steve P
Steve P

Level 3 Expert

3096 Answers

Are you a Cagiva Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides