Question about 1997 Yamaha YZF 750 R

1 Answer

Turning signal problems

I have a 1997 yahmaha xvz13A turning singnals in the back not working at all and front two are on all the time. no blinking or anything like that. it started by me having to turn on and off the blinkers two make them blink. the light on the tank does not work and i have noticed that the kick stand switch when it is wet wont start in gear with clutch ingaged. im thinking relay or bad ground in kick stand. what do you think. thank you

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 408 Answers

Kick stand switch does not have ground installed.It's 2 cables comes straight from the ECU.Sounds like rust in your harness plugs.Unplug the all one by one and spray them with penetrating oil.Also check the Flasher relay by turning on either one of your turnong signals and hit the relay lightly to see if it will work.

Posted on May 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1997 Buick Century,right rear turn signal


I had the same problem and my problem was the switch it self got one from the junk yard for $30

Jul 05, 2014 | 1997 Buick Century

1 Answer

My turn singnals wont blink but hazards work fine


That's a turn signal flasher. They are usually round and mounted on or near the fuse panel.

Sep 29, 2012 | 1996 Chevrolet Blazer

1 Answer

Right rear tran signal lamp does not work. changed light bulb still does not work. Front turn signal lamp blinks real fast


Please check the cables lead to your rear turn lamp for loose connection. Both turning lamps ( rear and front) should work to keep turning lights back to normal blink.
Regards

Feb 19, 2011 | 1997 Isuzu Hombre

1 Answer

The front turn signals do not blink and both bulbs are good. the back turn signals blink fast


not getting a good earth to fron lights, put a new earth lead to the front this should fix the problem,

Sep 29, 2010 | 1997 Buick Century

1 Answer

Both of my front turn signals will not work. The


Free wiring diagrams here http://www.bbbind.com/free_tsb.html
Enter vehicle info. year , make , model . Under system click on lighting ,then under subsystem click on exterior lighting .Then click the search button then the blue links . Looks to me like the daytime running lamps control module suppy's power to the front turn signals .

Jul 27, 2017 | 1997 Buick Century

1 Answer

Turn signal not flashing in front


you have a ground problem on the front socket.

Mar 21, 2010 | 1997 Buick.5 Regal

2 Answers

Turn signal is staying on continuously and brake light goes off


check the bulbs or the sockets for damage
or the wrong bulb
you are getting feedback through the wiring
and that lights up the dash

Jan 10, 2010 | 2000 Toyota Tacoma PreRunner

1 Answer

Left Turn Signal Flasing Very Fast


try replacing the bulb and make sure the new one is in the sock all the way push and twist good luck

Jun 27, 2009 | 2000 Volvo S40

2 Answers

Fast Blinker


Usually a fast turn signal means that there is a light out. You should probably check all of your lights, including back-up lights, and turn signals. If there is one out then replacing the burnt out bulb should fix the problem.

May 10, 2017 | 1997 Jeep Grand Cherokee

1 Answer

Brake lights work intermittently


It sounds like a wiring fault - an earthing problem. Have a look around the lights/inside the lights themselves.. rear and front lights, brake lights, etc ...check the wires for corrosion/splitting. In particular check any black earth leads where they attach to an earthing point.

Mar 26, 2017 | 1997 Chevrolet Lumina

Not finding what you are looking for?
1997 Yamaha YZF 750 R Logo

231 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...