Question about 1993 Yamaha YZF 750 R

1 Answer

Wont Start ...

Im having problem it dosent seem to be taking its gaz but there is something else wrong whit it also any idea ?!?

n could i posibly find another bike from 1994-1997 to fix this one ?!?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi and welcome to FixYa,

Initially, on your problem that "it won't start" determine if it is an electrical issue or a fuel issue.


  • does it crank (starter motor spins);
  • is there fuel when you loosen the drain screws at the bottom of the bowls of each carb;
  • is there spark? remove 1 plug, reconnect to wire, lay it against engine and crank. Note for sparks at tip.
Postback results of tests.

Good luck and thank you for using FixYa.

Posted on May 28, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Why wont my karcher window vac switch on even after a full charge any ideas ?

Take it apart and see what is stopping it (the motor) from turning .

Jun 23, 2014 | Karcher WV50 Window Vacuum

1 Answer


1pressure of the gaz(too low)
2valve gaz with problem
3maybe the thermostat

Dec 08, 2013 | Intertherm Heating & Cooling

1 Answer

Will not turn on complectly black screen

the lights are on? the cooler is on? if so try to conect it to a extenal monitor o lcd tv that got vga input.

if the image is on is posible that u got a problem whit display.

if no lights and no noise....u can try to take out batery and try just whit ac power

if is not working try to go to a center or something

i hope that help

Sep 22, 2011 | Computers & Internet

1 Answer

I've got a faema E91/A 3 group espresso machine. I'm testing the machine to see if all works. I've ran power by using a 10 gauge cord hooked up to 250v 30 amp. the cord is about 60ft long. Everything...

the original cord how many wire have? on the label what writes? if you have 5 wire (blue= null or neutral, green whit yelo= grounding, brown, black and grey= phases, is posible to have a red wire instead of grey, black or brown wire), on the blue wire whit one of the phases must have 220 V, on the brown whit another phase you must have 380V, if you had a bad conection is posible to damage something in electronic automatisation of the espresso machine, that machine must be conected in a water suply whitin a softner an befor use is posible to must be triggered manually. by the way, this machine must be proper instaled by a specilised personell beacause it is the risc of electric injuri and other bad things. your E1 is posible to be a temperature probe damaged or because of water mising and in 20-30 min. the machine was reaced a high temperature and safety thermostat has occurred. the best you can do is to call a repairman to solve this, if you try to repair your self it is posible to make worst.

Feb 21, 2010 | Faema FA60081

1 Answer

Problem whit my grafic card

Ok so does the pc turn on with the power out of the gfx card ?

The red dot means theres something wrong with card if theres no power to it the red light will come on .

Was this a new install of gfx card if so did you take a power connector from your hard drive or something

Oct 06, 2009 | XFX NVIDIA GeForce 8600 Graphics Card

1 Answer

It start whith that the suzuki was harder and harder start every day and one day it wont start att all. I have no Compression so i take the bike to a dealer ho fix the valve clearens, test and change the...

de decompressor as to be there....those four stroke need a good kickstart to fired ( without decompressor can broke you're kickstart pedal or hurt you badly..) i sugest you recheck valve clearance and make sure the timing is done when you are at top death center and you're exhaust cam is about to be open shortly after top death center.( that means you are in the right position to align the mark on both cam to each side of the head....also you can check out for fire problemme ( timing or firing at wrong time) you said it as fire then just put gaz into the spark plug hole (a spoon) then it should start right away or try to....then if it wont start you know carburation is not an issue because you by pass the carb by injected gaz right on top of piston...then only thing left is fire and compression...if you have all that one with care....let me know ill find away to make that things .....stephane.

Sep 03, 2009 | 2004 Suzuki RM-Z 250

1 Answer

Im Stuck In The Xbox 360 Dashboard And i Cant Get Out Of It

first off go to your system settings then console settings go down to locale if it dosent work after that u will have to create a new email and try again i would appreciate it if you could rate this solution

Dec 27, 2008 | Microsoft Xbox 360 Console

1 Answer

Ignititon switch

step on the brake hold the key all the way in and have some one at same time to top on the starter whit a little hamer if that does not work then try to start it in neutral and see what happen

May 28, 2008 | 1989 Ford F 150

Not finding what you are looking for?
1993 Yamaha YZF 750 R Logo

210 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts


Level 2 Expert

281 Answers


Level 3 Expert

936 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1147 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides