Question about 2004 Yamaha YZ 450 F

# Yz450 f stalls when you hit gas hard

If i give it gas smoth it runs good but if i gve it all iot stals not good in a race it all so backfires

Posted by on

• Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

• Contributor

It sounds like your main jet needs to be rejetted and tuned in it is sending to much gas and stalling out the bike

Posted on May 27, 2009

• Level 1:

An expert who has achieved level 1.

• Contributor

Boyesen makes a product called quick shot 2 that will fix your problem i have a 07 yz450f and that made a big difference no more hesitation and bogging thumpin hard

Posted on Jul 15, 2009

• Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Champion:

An expert who has answered 200 questions.

Governor:

An expert whose answer got voted for 20 times.

• Expert

Along with rejetting the carb you also need to adjust you air screw brass flat head screw strart a 3 quarters of a turn out and go from there a quater turn left rev and ride and repeat till you find your sweet spot to start turn all the right (in) gentaly not to damage then turn left 3/4 turn try and then a 1/4 turn at a time you might want change your plug first to eliminate the problem

Posted on Jun 24, 2009

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
Goodluck!

Posted on Jan 02, 2017

×

my-video-file.mp4

×

## Related Questions:

### When I ease into gas, it dies/or stalls. if I hit the gas no problem.

1 = Check between carb and head for vacuum leaks
2 = Float height could be set to low
3 = Needle height low

Give the carb a good clean with carb cleaner making sure all passages and jets are clear. Reset float height and make sure all flanges seal properly.

May 09, 2015 | GAS Motorcycles

### Car will not go when you press the gas

Try replacing the CTS coolant temperature sensor. Check for any vacuum leaks.

Apr 13, 2014 | 1985 Pontiac Firebird

### Car stalls out

check your pickup coil in the distibutor, if the wires are worn they can seperate causing the engine to stall, when the engine starts the vacuum advance moves the base plate where the p u coil is attached, when the advance starts to move the plate the wires can seperate causing it to stall out

Apr 13, 2014 | 1985 Pontiac Firebird

### Will not go

ck your pickup coil in distributor

Apr 13, 2014 | 1985 Pontiac Firebird

### When i give the car gas in wants to stal out and wont go

here are a few things that can do that to a car, the first and most important is the gas pump which could be breaking down, loosing psi. Secondly your plugs might need to be changed, etc plug wires. And the last thing is if your electrical wiring is damage it could cause current to break down while the veichle is driving causing it to stall .

Feb 25, 2013 | 1990 Chrysler New Yorker

### 04 crf450.hard start when cold(25deg).kick for 10min.once it

2. On cold start up twist about 15 times on your throttle, as you do that the accelerator pump in carb will shot gas in cylinder, I have a 2003 yx426 & 2005 yz450 have to do to both of them when cold out to get started

Feb 07, 2010 | 2005 Honda CRF 450 R

### The car is running poorly and missing when hitting the gas pedal

Give it a good tune up. Change the cap and rotor, plugs. Make sure that the plug wires are in good shape and not broken from heat.

Apr 14, 2009 | 1989 Chevrolet Corvette

## Open Questions:

#### Related Topics:

642 people viewed this question

Level 2 Expert

Level 3 Expert