Question about 1979 Harley Davidson XLH 1000 Sportster

1 Answer

Gear oir Where do u put gear oil in Iooked for the plug and cant find one.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 4 Answers

I dont own a harley and never have, but have had honda, and triumphs, your gear oil could possibly be your engine oil as well, the engine oil has dual purpose,,,,, no there no such thing as a dumb question,,, thats how you learn, ring a harley dealer, as to talk to spare parts and tell them year model of your bike and ask them if it has a seperate gear oil from engine oil, if it has ask them where your filler cap is, it might be under seat or under tank. my radiator cap for my daytona is under front tank cowl panel,,, ask dealer to be sure on everything with your bike

Posted on May 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have replaced all fluid in my 02 auto gear box but it won't go into gear do I have to bleed it


NO
when the engine is running the oil pump in the transmission immediately bpasses any oir out of the systems
what may have happened is that in removing the pan to drain the oil out for replacement, the wire harness and connections may be dislodged and the torque converter clutch solenoid is not getting signal to work

Jun 12, 2016 | Cars & Trucks

1 Answer

How to check trans.fluid on standard .cant find dip stick.


checking the gear oil on the Manual transmission requires you to get under the car, and about 1/2 to 3/4 way up the side of the transmission, there is an about 1/2" ***** in plug. remove the plug, and stick your finger in the hole. the gear oil should be up to the bottom of that hole to be full. most manual trans use 90 weight gear oil.

Apr 06, 2016 | 2007 Hyundai Accent GS Hatchback

1 Answer

How do i put in gearbox oil


hard to change gears is a clutch problem mainly so make sure that the clutch is operating properly ( makes no difference if hydraulic or cable)
Drain out the oil from the drain plug on the bottom of the box. clean the magnet on the plug. check for metal bits as this indicates bearings or gear problems. Replace the plug. About half way up the side of the box you will find another plug. Remove it. The oil you are using should be to makers specs but I prefer a 80-90 epw gear oil as the gears do a lot of work and need that extra tension in the oil to keep the teeth apart. Some makers recommend 30 grade straight mineral oil (not engine oil) but use what is recommended. You get the gear oil in 1ltre bottles ( pint or quart) and they now have an extendible plastic hose that you pull out. Put that in the plug hole and squeeze the bottle. Will probably use 2 and 1 half bottles depending on the box. Squeeze in oil until it flows back out the fill hole. Let it level out as that is the correct level of oil for the box. refit the plug tight

Dec 17, 2014 | Cars & Trucks

1 Answer

Oil pressure gauge


Oil sender unit possibly. Have seen problems with some of the Toyotas sender units before. Best to take the sender unit off and check the oil pressure to be safe so you do not cook the engine.

Mar 26, 2014 | 2002 Toyota Tundra

1 Answer

1992 Nissan Sentra E, 1.6 liter, 4 spd. manual trans., cant get filler plug loose for gear oil


Use more pressure, more elbow grease, put more force on it, use a bigger wrench or ratchet. Make sure its indeed the filler plug.

Dec 16, 2013 | Nissan Cars & Trucks

1 Answer

Black smoke tomach fuel eting


1) you engines has worn or damaged valve stem oil seats.
2) engine has plugged drain back hole
3) oil is being blown out past the intake manifold gaskets
4) punctured automatic transmissiono modulator diaphragm
5) worn piston rings.
6) worn cononecting rod bearign
7) oir visocity is too low.
God bless you

Jul 09, 2012 | 1988 Toyota Cressida

1 Answer

Transaxel gear oil leaking after five miles driving


If this is automatic you can be leaking at the banjo bolts,for manual the oil fill plug or oil drain plug,lift up the front wheels put the E brake on,do this all safetly,run the vehicle in gear wait and watch

Mar 09, 2012 | 1992 Acura Legend

1 Answer

Leaks oir or grease at shaft where beater attaches


eaking of oil in a stand mixer is not necessarily indicative of a large problem.

Kitchenaid stand mixers are overpacked with oil to last the lifetime of the motor. If the motor sits idle for some time (is not used), the oil may begin to drip from the gears and settle. Oil leakage may primarily be seen from around the beater shaft or planetary action.

A stand mixer can lose up to a 1/4 cup of oil before it needs to be serviced.

It is recommended to run the mixer on speed 10 for 2 minutes in order to redistribute oil back into the motor. In order to prevent future occurences, this is recommended to be done every 3 weeks if mixer is not being used.

If you still feel as though the mixer is in need of service, you may locate Kitchenaid certified repair centers through the following link: http://caservice.kitchenaid.com/

Jul 15, 2009 | KitchenAid K45SS Classic Stand Mixer

1 Answer

Gear oil level


There is no way to see the level in the gear box. There should be a small plug somewhere on the top the the gear box. You will need a very small funnel to put in. If the gears are crunching or grinding then try putting a little in. Just stanard auto gear oil will do.

May 19, 2009 | 2000 BMW 3 Series

1 Answer

Confirm entry point for "gear" oil gc 125 honda


the gear oil is the engine oil kept in the sump at th bottom of the engine

Feb 28, 2009 | 2001 Honda CB 125 T

Not finding what you are looking for?
1979 Harley Davidson XLH 1000 Sportster Logo

183 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...