Question about 2000 Harley Davidson FLSTC Heritage Softail Classic

1 Answer

15 minutes to fill up a 95 Heritage?

It takes 15 min to fill my 95 Heritage up.Obviously it is clogged somewhere along the bypass hose.I took the tanks off and flushed them out with gasoline and B.Bs.What came out wasn't rust like I expected but what put me to mind as paint flakes and good sized ones too.How can I resolve this problem without having to take my tanks off every time I get frustrated waiting on it to fill up?

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 150 Answers

95 heritadge has two tanks. you have gas caps on the right tank and the left tank you fill them seperately.

Posted on Jun 13, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have F32 in maytag 4000 series??

I seem to recall that this is a fault for the pressure sensor. Check your pressure hose by taking it off of the pressure sensor and blowing into it and making sure it's not clogged. If it's clear, change the pressure sensor along with the hose (just in case the hose has a small hole in it somewhere along the tube). That should do it.

Oct 23, 2014 | Maytag Washing Machines

1 Answer

Why does my Kenmore HE3t front load washer always take more time to finish then what it says on the timer?

Check the filters in both ends of the hoses. If they are clogged, it will throw the timer off. If it figures on 2 minutes to fill but it actually takes 6 or 7 minutes, the timer won't be accurate.

Jan 20, 2013 | Kenmore Elite 45986 Front Load Washer

1 Answer

I have a Saab 9-5 2001 sluggish take off when warm and fine take off when cold

I had the sane problem with my 2000 Saab Aero 2.3t at 135,000 mi. I took the black plastic cowl off from around the oil fill cap and intake to inspect vacuum lines and found a small line on the intake ( just beneath the clamp on the large rubber boot covering the intake facing me ) had come off. I replaced the line ( vacuum hose ) on the exposed fitting there on the front and test drove the car for 45 minutes with stops about every 15 min to park and shut off the motor. The problem was/is gone. I followed the line to the firewall area and a small vacuum canister that feeds the vacuum module on the air bypass tube next the radiator on the driver side. Don't know the technical terms for the parts but the problem surely has to do with that circuit which also has an electrical connection on the firewall intersecting canister. Hope this helps someone. I was lost.

Sep 17, 2012 | 2001 Saab 9-5

1 Answer

Cold water pressure poor in shower. Just had Rheem installed.

You might have clog in water lines.
If shower is only place where low pressure exists, then clog is probably at shower valve.
Disassemble valve and see if clog will flush out.
From there, you have to keep moving back along cold water line looking for pipe filled with sediment or elbow that has obstruction.

If pressure problem is bad at every cold tap, but doesn't affect Hot water, then clog is inside Cold line somewhere after water heater connects to cold line.
Buy a pressure gauge that connects to water hose.
Buy adapter that also fits pipe thread.
For example Brady BTG 100.
Test outdoor spigot for baseline pressure.
Open cold tap inside house and see how much pressure drops.
Close cold line and open hot tap and see how much pressure drops.

Next, move pressure gauge along cold water line.
Take apart pipes and inspect for obstruction at elbow or pipes filled with sediment.
Look for any place galvanized pipe connects to copper pipe, since this will be likely place for obstruction because of bi-metal corrosion.

Add a comment for more free help.
Also take advantage of fixya phone service.
For a price, fixya expert speaks with you over phone while you work on pipes.

Jan 05, 2011 | Rheem 40 Gallon FVR NATGAS Low WATER...

1 Answer

Lf code on washer.checked hoses and valve both ok unit will run after opening the lid and closing lid and pressing start again. takes 10/15 minutes for a load to start

LF means that it is taking too long to fill. (If the water fill time exceeds ten minutes, the water valves are turned off and LF is flashed.)

Supply hoses could be kinked or clogged(some have screens in the end).
This could be a supply water pressure/flow problem. Make sure you have good water flow though the hoses to the machine. (Take off and try running into a bucket)
The water fill valve may be failing to open all the way or it could be clogged.
I hope this helps.

Mar 20, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...

3 Answers

Ford Windstar 2001 Gas filling problem

The fule tank vent tube is blocked/clogged. It's the little hole next to the filler hose that invites spiders that clog it up. Blow out the tube and it fixes the problem.

Nov 24, 2008 | 2001 Ford Windstar

Not finding what you are looking for?
2000 Harley Davidson FLSTC Heritage Softail Classic Logo

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers


Level 3 Expert

4340 Answers


Level 3 Expert

76164 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides