Question about 2005 Suzuki Boulevard C90

2 Answers

Charging system failure suzuki c90 2005

I need to know the location of the fuse block and diagrams for charging system

Posted by on

  • Anonymous Mar 20, 2014

    attempting to locate the fuse panel


2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 20 times.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 16 Answers

My Clymer manual has good diagrams.
The 30 amp fuse that protects the charging system on my '07 C90T is located behind the left upper cover. Yours is the same.
You have to remove the steering head cover and the chrome speedometer section to get to it.
Yep. blow the fuse on a trip and you better have tools so you can get to it.

Posted on Sep 20, 2009

  • Robert Emerson
    Robert Emerson Apr 08, 2014

    You guys are the best. Not knowing where fuses exist means a lot. Thanks again


  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

30 amp fuse protects charging system located under speedo cover

Posted on Apr 08, 2014

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Diagram showing location of blower motor and installation for 2004 cadallic sedan 8 cyl

. How do you know you need one ? Did you do electrical circuit testing ? Is your HVAC - heater / A/C system automatic or manual ? Could need a blower motor control processor ! Electronic module . Did you check the blower motor fuse ? HVAC /BLO fuse 40amp in the rear fuse block ? Under the back seat ?

Apr 18, 2017 | Cars & Trucks

1 Answer

Need to locate what fuse goes to what on the compartment and under dash

Go to free wiring diagrams ! Enter your vehicle info. then under system click on engine , then under subsystems click on charging system . That should show what you need ! Do you know what fusible links are ? You can google it ,show you better then I can explain ! Hopefully ! Good luck !

Sep 03, 2016 | Cars & Trucks

1 Answer

Why doesn't charging system charge?

Did you check for B+ voltage at the wires connected to the alternator ? Could have a blown fuse or fusible link . Go to free wiring diagrams . Fill in your vehicle info .under system click on engine then under subsystem click on charging system . Look at diagram to see which wire has power an what fuse powers it etc. There are some good videos on youtube on checking charging system .

Mar 27, 2016 | Suzuki Grand Vitara Cars & Trucks

1 Answer

My blower motor fan quit working completely all at once.

In the power distribution panel (located in the engine compartment) are the main fuses and relays. When you pull off the cover, there is a diagram schematic identifying each one of them. Should you remove the relays out of the power distribution panel, be aware of their orientation before removing them so that you can put them back in the same location of orientation; since some relays have double terminal blocks that serve two distinct circuit components that are rated specifically to that circuit.

One side of the terminal block could be good while the other defective.

Or the relay could be sitting loosely in the terminal block; try wiggling or re-seating it.

Check the fuses and relays in the under dash fuse panel; the cover to this fuse panel will have a diagram identifying each fuse and relay and what component it controls.

In the absence of any diagram on either covers, consult with the owner's manual that came with your will have a detailed picture identifying the fuses and relays in the PDP and Fuse panel.

If everything checks ok, then you'll have to check the switch that controls fan speed, the motor resistor block, and the fan itself

Feb 27, 2015 | 2000 Suzuki Grand Vitara

1 Answer

Where is the horn fuse in silhouette 2001

First, there are two fuses and a relay that are part of your horn electrical circuit. I suggest you have someone with at least a bit of knowledge about auto electrical systems help you in this task. You can judge if you need help or not by asking yourself these questions and knowing the answers. Where are the two fuse blocks on my 2001 silhouette? and where is my owners manual that came with my van? If you knew that the fuse blocks were located-#1-under the front hood of the engine compartment, on the left side, jut to the left and above your radiator cap. If you know where your manual is....look near the back for diagrams of your fuse blocks. If "yes to both questions....continue to read....Unscrew the back plastic thumb nut on top of the fuse block case to access the fuses and relays. Relay #16, the furthest to the rear and dead center of the the horn relay.....relays are the larger, square shaped devices plugged into the fuse block. #36 fuse is the horn fuse in this block. It is located in the back right side of the block, in a cluster of 7 fuses. #36 is the furthest to the back of the two rows of fuses that comprise the cluster of 7. The second fuse block is located on the passenger side, in the side of the dash board. Access this fuse block by opening the passenger side front door then prying off the cover with your finger tips. You will have a fuse locator on the back side of the cover you pried off the side of the dash, the cover for the fuse block. find the "horn" fuse location diagram on the back of the cover. Each of the two fuse blocks have or had a fuse puller tool in each compartment to use to pull out the fuses. A relay will require you grab it with your fingers, wiggle it side to side to loosen it, then pull upward to remove. Make sure to replace it exactly as it was when removed. There are several relays, that are the same size as the horn relay, that can be removed and placed in the horn slot to test if your horn relay is bad or not. But first check the two fuses before moving to the relay. Fuses will show if they are bad or not by whether the metallic fuse link is still connected across the middle of the transparent fuse link. To view this link you have to remove the fuse. If the connection is broken, it's no good...replace it with a fuse of the same color or amperage. If your fuse continues to blow need to see a mechanic or electrician to find your short in the wiring causing the blow out. Again...if you couldn't answer "yes" to the two questions above....please get help from a friend or neighbor. In any case, be cautious when working on your car electrical system, and good luck.

Feb 16, 2015 | 2001 Oldsmobile Silhouette

1 Answer

Find a diagram for 2005 dodge durango interior fuse box

Download the owner's manual for free from the Dodge website here:
My Dodge Dodge Owners Service Manuals Dodge Cars Minivans SUVs
The interior fuse block diagram is located on pages 343 - 345.
(Location of the fuse block is on page 342.)

Dec 31, 2014 | Cars & Trucks

1 Answer

Engine fuse diagram

The O2 sensors are not connected through any relays. What is the problem that you are trying to solve. I do not believe the diagrams can assist you with O2 problems but I have included them. Please elaborate on your problem and I'm sure I can direct you to a solution.

Locations of fusible link, junction and relay block:

Fusible link block:

Junction block:
Relay block #2:

Relay block #3:

Aug 22, 2012 | 2004 Toyota Sequoia

2 Answers

Where located fuel sensor Suzuki Ario 2003

Component location diagrams for most 2003 Suzuki Aerio cars and light trucks sold in the U.S. from 1990+.
clsk2003aeri003.gifIgnition System Components Location Diagram for 2003 Suzuki Aerio 2.0 L4 GAS
Components on diagram:
  • TP Sensor
  • Ignition Coil
  • ECM
  • MAF Sensor
  • CMP Sensor
  • clsk2003aeri007.gifElectronic Shift Control System Components Location Diagram for 2003 Suzuki Aerio 2.0 L4 GAS
    Components on diagram:
  • Data Link Connector
  • Transmission Range Sensor
  • Throttle Position Sensor
  • Pressure Control Solenoid Valve
  • Battery
  • clsk2003aeri010.gifInstrument Panel For Connector Layout Diagram Diagram for 2003 Suzuki Aerio SX 2.0 L4 GAS
    Components on diagram:
  • Clutch Switch
  • Thermistor
  • Brake Light Switch
  • Blower Motor Relay
  • Heater Fan Motor
  • clsk2003aeri011.gifInstrument Panel Harness Diagram for 2003 Suzuki Aerio SX 2.0 L4 GAS
    Components on diagram:
  • Wiper Switch
  • Washer Switch
  • Data Link Connector
  • Turn Signal Relay
  • Radio
  • clsk2003aeri015.gifHeadlight System Location Diagram for 2003 Suzuki Aerio SX 2.0 L4 GAS
    Components on diagram:
  • Headlight Relay
  • Headlight
  • Clearance Light
  • Headlight Diode
  • Clearance Light Relay
  • clsk2003aeri022.gifFuel System Components Diagram for 2003 Suzuki Aerio SX 2.0 L4 GAS
    Components on diagram:
  • Fuel Pump Relay
  • Fuel Tank Pressure Sensor
  • EVAP Canister
  • Fuel Tank Pressure Control Valve
  • Fuel Filler Cap
  • clsk2003aeri027.gifFloor For Single Unit Parts Diagram for 2003 Suzuki Aerio 2.0 L4 GAS
    Components on diagram:
  • Wheel Speed Sensor
  • ABS Control Module
  • G Sensor
  • Air Bag Control Module
  • EVAP Canister Vent Valve
  • clsk2003aeri030.gifInstrument Panel For Ground Point Diagram for 2003 Suzuki Aerio SX 2.0 L4 GAS
    Components on diagram:
  • Instrument Panel Ground Points
  • clsk2003aeri036.gifEngine Compartment For Single Unit Parts Diagram for 2003 Suzuki Aerio 2.0 L4 GAS
    Components on diagram:
  • Throttle Position Sensor
  • Horn Relay
  • Radiator Fan Control Relay
  • Cruise Control Module
  • Condenser Fan Relay
  • clsk2003aeri037.gifEngine Compartment Components Diagram for 2003 Suzuki Aerio SX 2.0 L4 GAS
    Components on diagram:
  • MAP Sensor
  • Knock Sensor
  • Noise Suppressor
  • Heated Oxygen Sensor
  • Sep 18, 2011 | 2003 Suzuki Aerio

    1 Answer

    I'm replacing the radiator on 05 suzuki forenza and I need advise on how to disarm the airbags which I am told are near the radiator

    Actually the Airbag Sensors would be located Close to the Radiator and can be disabled by removing the Airbag Fuse. To locate the Airbag Fuse look for a diagram near you fuse panel sometime located on inside of fuse panel cover if not it will be located in your Owners Manual. In this Diagram there should be names attached to each fuse just locate the one that has Airbag System on it. An easier way to achieve this is to disconnect the Negative Battery Cable from the Battery and be sure it stays away from the battey far enough to ensure that no power is able to travel to the fuse box.

    Thumbs Up if Helpful!
    Feedback is Appreciated!
    Good Luck!!!

    Jun 18, 2011 | 2005 Suzuki Forenza

    Not finding what you are looking for?
    2005 Suzuki Boulevard C90 Logo

    1,062 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Suzuki Experts


    Level 3 Expert

    75051 Answers

    Arnie Burke
    Arnie Burke

    Level 3 Expert

    4514 Answers

    Ed Nelson
    Ed Nelson

    Level 2 Expert

    149 Answers

    Are you a Suzuki Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides