Question about Bajaj Motorcycles

1 Answer

After runnung 6 km my pulsar timing chain creat noise

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Bajaj Master
  • 44,769 Answers

Hi, Anonymous for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary transport your vehicle to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.How to adjust Timing Timing Chain Tension and Valves
how to replace timing chain on honda XL250 part 2 of 2 Davidsfarmison...
DOWNLOAD Bajaj Pulsar 135
http://www.marutibajaj.com/pdf/PULSAR%20135%20LS%20SPC%20.pdf
http://shahriary.staffcms.um.ac.ir/imagesm/1064/My_Pic/pulsar_135_ls.pdf

Posted on Dec 01, 2015

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
co7196
  • 3433 Answers

SOURCE: my pulsar 180 has noise engine . what to do

It could be a simple timing issue or even bad fuel. Check out your fuel.Mix or straight fuel? If mix, chk oil to fuel ratio. If straght gas, up the octane. Good luck, Ned

Posted on Sep 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My pulsar 150 ug2 engine is tik tik sound but timing chain is new


Hi, Dipjyoti I would love to help you with your engine or chassis noise but I just loaned my brand new pair of listening ears to your local dealer's chief technician so he could take your bike for a test ride and give you his professional opinion and estimate about your noise and repair cost. If you are a little short on "DRACHMA" and a Dealership is not on your list of fun places to visit then perhaps the list below will help soothe your worried mind so you can make an informed decision.
1. Bearings---SCREECH
2. Belts---CHIRP
3. Brake Rotors---BUZZ
4. Chains---RATTLE
5. Clutches---CHATTER
6. Cylinders---PING
7. Fronk Forks---Plunk
8. Gears---WHINE
9. Head Gasket---HISS
10. Hydraulic Lifters---TAP
11. Pistons---SLAP
12. Rear Shocks---SQUEAK
13. Shifting Trans---CLUNK
14. Solid Lifters---TICK
15. Starters---CLICK
16. Connecting Rods Go---KNOCK-KNOCK---who's there, it's me "*****"
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Thread DIY Get rid of that infamous TICK TICK noise
http://www.xbhp.com/talkies/help-me/25683-bajaj-pulsar-150-ug3-tick-tick-sound.html
Bajaj Pulsar 150 DTS User Manual
Shop At Bajaj Pulsar 150 DTSi UG2 Motorcycle Parts And Accessories Online...
Pulsar Workshop and Parts Manual Team BHP

Feb 04, 2017 | 2007 Bajaj Pulsar 150

1 Answer

I have noise rocam when is run what wrong with my car


  1. Timing Chain
  2. Timing Chain Guides
  3. Timing Chain Tensioner
  4. Timing Chain Camshaft Sprocket, Crank Shaft Sprocket
Alert Engine Parts sells the above kit for approx R680

Also change the oil pump when changing timing chain kit and sump gasket seal.

Oct 02, 2015 | 2005 Ford Bantam 1.3i

2 Answers

Bike vibrating in pickup time back side


Hi Pradip,
The reason for this problem may be because of you chain sprocket, check if its placed tightly, Also check your Bore Piston.

Apr 30, 2014 | 2005 Bajaj Pulsar 150

1 Answer

Bajaj discover 135 chain noise


Hi, Vinod I would love to help you with your engine or chassis noise but I just loaned my brand new pair of listening ears to your local dealer's chief technician so he could take your bike for a test ride and give you his professional opinion and estimate about your noise and repair cost. If you are a little short on "DRACHMA" and a Dealership is not on your list of fun places to visit then perhaps the list below will help soothe your worried mind so you can make an informed decision.
1. Bearings---SCREECH
2. Belts---CHIRP
3. Brake Rotors---BUZZ
4. Rear Chains---RATTLE
5. Cam Chains---CLICKIT
6. Clutches---CHATTER
7. Cylinders---PING
8. Fairing Panels---WHISTLE
9. Fronk Forks---Plunk
10. Gears---WHINE
11. Head Gasket---HISS
12. Hydraulic Lifters---TAP
13. Instrument Clusters---BUZZING
14. Kick Starter---GRINDS
15. Pistons---SLAP
16. Radiators---GURGLE
17. Rear Chains---RATTLE
18. Rear Shocks---SQUEAK
19. Relays---CLICK&BUZZ
20. Shaft Drives---WHIRR
21. Shifting Trans---CLUNK
22. Solid Lifters---TICK
23. Speedometers---bzzz
24. Starters---CLICK
26. Rods Go---KNOCK-KNOCK---who's there, it's me "*****"
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Pulsar Rouser 135 LS Timing Chain Noise Part 1
Pulsar Rouser 135 LS Timing Chain Noise Part 2
Repair manuals Manuals Bajaj
Shop At Bajaj DISCOVER135 CC Bike Parts And Accessories Online Store...
Owner Manual Bajaj Auto

Oct 15, 2017 | Bajaj Discover Motorcycles

1 Answer

My bike Pulsar chain and engine makes much more noise how can i solve this problem. while i have serviced it at it's proper time,however it makes much more noise.......and one more problem is that jab...


Usually the noice at this juncture is due to the chain. See if you can tighten the chain or get it replaced, which should make the bike flow smooth.

Jul 23, 2011 | 2011 Bajaj Pulsar 180

1 Answer

I hav pulsar 150dtsi model2004,nowadays i feel its firing very bad noise, n also its smoothness running is so minimised.wht will b this problem?


Replace your timing chain, mobil,& adjust tappit and keep a check on the mobil levels.. if it decreases top it up. Back firing is caused due to timing chain mismatch. Just do the same.. it will be fine..!

Sep 27, 2010 | 2005 Bajaj Pulsar 150

1 Answer

I got a pulsar 150, 2006 model the problem is that when run on high speed the handle shake a little bit and by the way it create great noise from the from handle in rusty road. second problem is that it...


Hi, Jehovajire19 and the usual suspects are:
1. Wheels and/or tires worn or damaged.
2. Engine/transmission/vehicle not aligned properly.
3. Primary chain badly worn or links too tight as a result of insufficient lubrication or misalignment.
4. Engine to transmission mounting bolts loose.
5. Upper engine mounting bracket loose.
6. Ignition timing incorrect/poorly tuned engine.
7. Internal engine problem/flywheels shift.
8. Broken frame.
9. Stabilizer links worn or loose.
10. Rubber mounts loose or worn.
11. Rear fork pivot shaft nuts loose.
12. Front engine mounting bolts loose.
For more information about your issue, please visit the websites below. Good luck and have a nice day.
https://www.tradebit.com/filesharing.php/search/0/bajaj+pulsar+150

Aug 07, 2010 | 2007 Bajaj Pulsar 150

3 Answers

My pulsar 180 has noise engine . what to do


It could be a simple timing issue or even bad fuel. Check out your fuel.Mix or straight fuel? If mix, chk oil to fuel ratio. If straght gas, up the octane. Good luck, Ned

Sep 09, 2009 | 2005 Bajaj Pulsar 180

2 Answers

Engine have a sound after ride of 6-7 Km,Switch of then Switch on


normally pulsar engine sound changes after 4000kms and the kind how you drive matters,if you have smooth handling til 5000kms initially then the engine,clutch,gear box sets to its maxim efficiency.. if ur a rough user then very soon u ll hav wear nd tear in clutch and gear box.. 4 ur problem ask ur service engg. to load up the SISSOR TEETH in gear box,this may reduce the engine noise...

Apr 29, 2009 | 2007 Bajaj Pulsar 150

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bajaj Experts

sachin sharma
sachin sharma

Level 2 Expert

171 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Are you a Bajaj Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...