Question about Motorcycles

1 Answer

Am going for long drive with pulsar 150 Is pulsar can do it or engine gets problem two people are going in this bike

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Welcome Back:

    Visited the website for 2 consecutive days.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Of course your Pulsar can do it but for this you have to keep your machine is in perfect condition, and for keeping it perfect you should consider daily inspection check up and Service your bike at recommended intervals at A.S.C. or before when you are heading to a long trip.
Remember if you don't maintain your steed then it will sure give you some serious problems whether it is Pulsar, Hondas or whatever, No bike is perfect.
Always Break in your bike according to the table mentioned in the User Manual.
Always Treat your Machine like your precious asset, Don't believe those guys who're hampering Brand image by making false claim or due to their ill maintenance.
Read thorougly Bike's Owner's manual.
Thank You.

Posted on Dec 31, 2014


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 12 Answers

SOURCE: rate of pulsar 150 engine

8000 rpm is the rate of pulsar 150cc

Posted on Jul 02, 2009

  • 12 Answers

SOURCE: Pulsar 150 CC headlight blown off severial times

This is problem cant be solved by changing head light. You need to replace wiring of your bike. This problem is occur because of short-circuit in wiring.

Posted on Jul 02, 2009

  • 7 Answers

SOURCE: what is the air pressure standard for the tyres of

front 28 back 32

Posted on Jul 10, 2010

  • 1183 Answers

SOURCE: my bike (bajaj pulsar 150

A 4-stroke engine on the pulsar should not produce blue smoke. The cause for the same could have been the engine got overheated. Blue smoke generally signifies oil burning, and if it does it immediately after start up, then goes away, that usually means valve seals are worn out. You would have to get to the engine , to see where the problem is.

Thanks for using fixya
Happy Reving


Posted on Aug 31, 2010

  • 11 Answers

SOURCE: noise coming from front shock absorbers in bajaj pulsar bike

I also agree with the above solution.

Posted on Oct 10, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2017 Bajaj Pulsar 150 how to get better fuel economy

Hi, Anonymous the following tips are low cost easy to apply/install and guaranteed to give you better gas mileage and a smoother running bike. The average motorcycle gets 56-64 KMPL. saving .2 Litre of gas could save you a 10 Kilometer walk. 125cc scooters have been known to get 185 KMPL.and more.
1. Proper tire inflation as per MFG. specifications wheels should be balanced and spokes tight.
2. Oil and coolant levels maintained at full marks, low levels produce excessive heat that causes the engine to work harder and reduces efficiency.
3. Keep extra weight to a minimum.
4. Take off from a dead stop should be smooth and easy throttle applied avoid excessive throttle snaps.
5. Smaller windshields get better KMPH than large ones, wind resistance increases as a square of the speed at which you're traveling. For example, at 112 KMPH, wind resistance is double what it is at 80 KMPH (70 squared is almost twice as much as 50 squared). That will dramatically reduce your mileage. Keep that in mind while biking.
6. Keep idle time to a bare minimum or turn off the engine.
7. Re-jet carburetor with a smaller main and mid-range jet.
8. Keep chain/belt properly adjusted.
9. Avoid quick braking, hasty acceleration, high-speed driving, try driving the speed limit and keep a constant speed.
10. On long trips use freeways or flat straight stretches of highways rather than city or rural routes avoid hills and mountains when possible.
11. Keep your engine clean, dirt and grease/oil hold in heat.
12. A full-face helmet is more aerodynamic than other types of helmets. Any other clothing that decreases your aerodynamic should be reconsidered.
13. Any unnecessary bling on your bike is going to decrease fuel efficiency.
14. Use high-quality fuel using low-quality fuel can cause sludge in your fuel injectors.
15. Keep warm up time to a minimum get off the choke ASAP.
16. Motorcycles run best when their engines are maintained, and that includes making sure the air filter is clean, the spark plugs are fresh, the fuel filter is free, and the timing/valves are adjusted.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the links below. Good luck and have a wonderful day.
Tips on How to Increase Bike Mileage
Bike Mileage Tips 10 Quick Tips to Improve Your Bike Mileage
Bajaj Pulsar 180 DTSi Workshop Manual
Bajaj Bike Spare Parts
Bajaj Pulsar 150 DTS User Manual

Jan 23, 2018 | 2011 Bajaj Pulsar 150

1 Answer

2006 Bajaj Pulsar 150 excessive vibration

Hi, Sophisticatedshit and the usual suspects are:
1. Wheels and or tires worn or damaged.
2. Engine/transmission/vehicle not aligned properly.
3. Primary chain is badly worn or links too tight as a result of insufficient lubrication or misalignment.
4. Engine to transmission mounting bolts loose.
5. Upper engine mounting bracket loose.
6. Ignition timing incorrect due to a poorly tuned engine.
7. Internal engine problem flywheels have shifted.
8. Broken frame.
9. Stabilizer links worn or loose.
10. Rubber mounts loose or worn.
11. Rear fork pivot shaft nuts loose.
12. Front engine mounting bolts loose.
13. Worn out or broken universal joint on shaft drive models.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Pulsar 150 classic Engine vibrates too much
Pulsar_DTSi_UG_III_Workshop Manual 1.pdf
Pulsar_DTSi_UG_III_Workshop Manual 2.pdf
Pulsar_DTSi_UG_III_Workshop Manual 3.pdf
Pulsar_DTSi_UG_III_Workshop Manual 4.pdf
Bajaj Pulsar 150 DTS User Manual
Bajaj Pulsar 150 ES DTS UG 2006
Bajaj Pulsar Wikipedia

Dec 18, 2017 | 2006 Bajaj Pulsar 150

1 Answer

My pulsar 150 engine is seized due to less oil what to do

Hi, Abhimanyu sorry to hear about your misfortune you will have to disassemble the engine and inspect for damage for more information about your question and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Bajaj Pulsar 180 Engine Work Required Suggestions Please
Bajaj Pulsar 180 DTSi Workshop Manual
Bajaj Pulsar 150 DTS Owner Manual

Jul 11, 2016 | Bajaj Pulsar 150 Motorcycles

1 Answer

Pulsar 150,1year, engine get heat quick, my afr ***** 2 turn anticlockwise. If any relation btwn the afr & the engine heat, bcz I drive mostly to long drives 500 to 750 kms if this causes any problem

Hi, Anil the air-fuel mixture scr*w only manages your idle circuit and nothing else and the usual suspects are:
1. Insufficient oil supply, or oil not circulating.
2. Insufficient air flows over the engine.
3. Heavy carbon deposits.
4. Ignition timing retarded due to faulty MAP, CKP, and/or CMP sensors.
5. Leaking intake or exhaust valve.
6. Water coolant low or pump failure.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
Bike engine getting heated up very quickly
Pulsar 200 engine noise over heating
Bajaj Pulsar 150 DTS User Manual

Apr 12, 2016 | Motorcycles

3 Answers

How can I properly tune the carborator for the good mileage in the Pulsar 150 DTSi ? I need to know the step by step process so that I can tune it myself. Please assist me

Hello, factory preset settings are recommended & are the best.
The engineers have tuned the bike for optimal power & economy. They have the equipment to monitor engine perimeters and exhaust emissions. This is something you don't have. I hope this helps.


Oct 12, 2011 | 2011 Bajaj Pulsar 150

1 Answer

Currently i have bajaj pulsar 150 recentely i had purchased 3 months ago but this time my bike is not give proper milage nd my bike is full of sound on each or every part is loose on my bike ...........

Get it serviced & the carburetor balanced. Tighten the main chain & get the timing chain adjusted. Clean the plugs & the gap adjusted. Change engine oil.

Dec 16, 2010 | 2007 Bajaj Pulsar 150

1 Answer

I hav 2 pulsar 15o but in worse condition

you have serious ignition timming problems. what you described is bad timming and fuel supply.may be module/computer

Jul 15, 2009 | 2006 Bajaj Pulsar 150

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers


Level 3 Expert

77514 Answers


Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides