Question about Nil Behringer TPK989 Tremolo Chorus and Digital Multi FX Pedals for Keyboards Including Cables

Open Question

Manual for behringer QX 1204 USB mixer - Nil Behringer TPK989 Tremolo Chorus and Digital Multi FX Pedals for Keyboards Including Cables

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I reduce white noise / hissing I'm getting over the mic on a Behringer Xenyx 1204 USB setup?


Hi, you didn't say if the mic actually passes sound? The C-1 is a condenser Mic & needs phantom power - switch on the rear of your mixer. If that's no help, what happens if you disconnect the mic, then turn the levels back up? Still hissing or gone? If it's gone then it's the Mic - must use a 3 wire cable, preferably XLR so it gets the phantom power. If the hiss is still there without the Mic then sounds like the mixer is faulty - try some of the other channels..... How loau is the hiss - just in the background or as load as a vocal "one, two" test? A few things to check anyway...... Good Luck!

Dec 01, 2016 | Behringer Music

1 Answer

How do I get driver updates to connect with pre sonus software


Not sure what your issue is, as long as you have the ASIO drivers installed you'll be able to get a decent copy of the main mix into and out of presonus. Even if not the standard windows sound drivers will recognise it as an external sound card and you can map this into / out of presonus so you don't actually need ANY drivers other than standard windows ones. If you were hoping to get access to the individual channels to do the mix in presonus forget it, this is not what what your mixer is designed for, get an X32 or other professional mixer.

Mar 15, 2016 | Behringer XENyX 1204 XENyX 1204 12 Channel...

1 Answer

I need driver update to connect with pre sonus artist one software


If you use the Behringer ASIO drivers (available from their web site) it will connect just fine, you should also be able to use the sound card drivers that came with the computer as they should pick up on the mixer (assuming it is a USB version) but you do not say if you have a Mac, PC or what operating system you are running so it is impossible to be precise

Mar 15, 2016 | Behringer XENyX 1204 XENyX 1204 12 Channel...

1 Answer

What causes my cd/tape input doesn't work anymore.


Make sure that the cable going to the left and right inputs is OK. Try another cable or test with a different recorder.

Oct 01, 2014 | Behringer XENyX 1204 XENyX 1204 12 Channel...

1 Answer

I want to set up my behringer fbq1502


It sounds as if you are not running in series. I assume you are in an insert on the mic channel. The insert send should go to the first item in the chain, then from the output of that to the input on the next item and so on until the output of the final item in the chain goes back to the return on the insert. This is applicable to the type of equipment you have detailed, in some cases however you may be running effects in parallel. Your case is definitely a series situation.

Mar 08, 2014 | Behringer FBQ1502 Ultragraph Pro Dual...

1 Answer

Behringer How To Use x1832 usb mixer


What is your question? A bit more information is needed before we can answer your question???
or
Read the manual: http://www.behringer.com/assets/X1622USB_X1832USB_X2222USB_X2442USB_M_EN.pdf

Aug 09, 2013 | Behringer XENYX X1832 USB Mixer

1 Answer

Owners manual for Behringer xenyx 1204 USB


Behringer has the documentation for the Xenyx X1204 USB Mixer on the product page: http://www.behringer.com/EN/Products/X1204USB.aspx . See the drop-down menu labeled Documentation on the left side of the page; it's below the list of stores that sell the unit. The owner's manual is at the bottom of the list in that menu.

The file is a PDF so you will need Adobe Reader or a similar program to display the 3.1 MB file.

I hope this helps.

Cindy Wells

Oct 24, 2012 | Behringer XENYX X1204USB/1204 USB...

1 Answer

Unit behringer xenyx 1204 fx does not work


i'm trying to find the circuit diagram for a xenyx 1204 mixer

Nov 08, 2008 | Behringer EUROPOWER EP2500 Amplifier

1 Answer

Connection


There are 2 ways to have an EQ in the system. If the mixer (1204) has inserts for the mains, you can use a set of insert cables to connect the EQ. If not, connect the Output of the mixer to the Input of the EQ and the Output of the EQ to the Input of the Amp.

The insert cables will allow you to electrically connect the EQ as described above only using a single set of cables. These cables are 1/4" balanced or stereo at one end (Tip-Ring-Sleeve) and dual XLR at the other. You will need 2 insert cables, one for right and one for left.

Hope this helps,
dan

Jun 19, 2008 | Audio Players & Recorders

Not finding what you are looking for?
Nil Behringer TPK989 Tremolo Chorus and Digital Multi FX Pedals for Keyboards Including Cables Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nil Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76682 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Nil Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...