Question about 2002 Suzuki GSX 1400
Posted by Anonymous on
Hi, Anonymous the answer to this question is way above my pay grade but I'll try average price on eBay is $950 also for this situation, I would call or visit my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Suzuki GSX1400 Service Manual
OEM parts for Suzuki
Suzuki GSX1400 Owner Manual
Suzuki GSX 1400 2002
Suzuki GSX1400 Wikipedia
Posted on May 31, 2017
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
no, its not the Aquaspeed 170, but Aquaspeed 150. i succeded to unwrap the housing, but did fail in disconnecting or dismounting the power cord terminal.i could not disassemble the Iron to reach the heater. to dismantle, step 1 unscrew 3 visible screws. step 2 lift the heel cover away, by unsnapping 1 hooks at the right and one at the left side of the heel cover. i used thumnbnail to deform the heel cover for not to wear out the snap-in hooks. step 3 remove the dischalk stick (don't know the right wording in english) step 4 lift the top cover (which covers the spray jet part), 2 hooks at both left and right, use thumbnail or flat screwdriver, start at the top hook. step 5 take off the spray and steam buttons, 1 hook at the front side, 1 hook at the outer back side step 6 take off 2 screws: one keeps the upper half of the handle, the other fixes the water container at the heater plate. Attention: when unmounting the container, and turning the iron upside down, a small (4mm diam, ~10 mm length) silicone cylinder part will fall out, some kind of actor of a bimetal thermo switch in the ground plate, which probably controls water flow (not the electric thermostate) so far so good, i got my problem solved, but would like to know how to disassemble the container from the ground plate and how to replace the cable?
Posted on Aug 22, 2007
SOURCE: My computer cannot detect my
sadly, if your computer is not recognizing the USB flash/pen drive at all when you plug it in then it's one of a couple of possible problems which can be separated into 2 distinct groups.
1) problems with your computer
--you said you tried multiple computers, and it would not recognize on any of them. i'm assuming they are systems which this or a similar drive has worked on before. therefore, it's 90% certain that there is NOT a computer configuration problem.
2) problems with the drive
--if the drive is being recognized by the computer, and you just can't retrieve the data on the drive then there's a couple of possible solutions. Tech Republic offers free membership and several "free to try" programs that could help recover the data on your drive. Click here for a link to Tech Republic
--If the drive is not being recognized by your system, then it is most likely physically damaged and there is not a high probability of recovery. If the connector is bent at all you could try straightening it out, but other than that there's not much you can do to recover your drive.
I hope my solution answered your question or helped out in some way. Please do not forget to rate my solution.
Posted on Jul 14, 2008
SOURCE: aprilia rs 125 starting problem
First check the battery to see its still fully charged. If it is do a voltage drop test between the battery and the starter to check for a bad relay or open circuit. If that checks out, you very likely have a bad starter/solenoid. I can explain how to do these tests if u need me to
Posted on Nov 26, 2008
If there is a clicking noise when you hit the starter button, then the relay should be fine.
If there is no sound, check the fuses before removing the starter.
Posted on Feb 14, 2009
Tips for a great answer:
Apr 05, 2017 | 2008 Suzuki GSXR1000
Jun 12, 2016 | 2000 Suzuki GSX-R 600
Dec 23, 2013 | Ducati 1098 S Motorcycles
Mar 09, 2011 | Capcom Street Fighter II Turbo
Jul 12, 2009 | Computers & Internet
Apr 29, 2009 | Nintendo Super NES Console
Feb 08, 2009 | Nintendo Super NES Console
19 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: