Question about 2006 Suzuki DL 650 V-Strom

1 Answer

Headlights don't work on start up

My headlights don't work when key is turned on-high or low beam. However, the momentary high beam button does activate the high beams. All other lights do work. Any suggestions?

Posted by on

  • Anonymous Mar 14, 2014

    low beam on headlight wont work

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 948 Answers

Energy must pass through your switch (hi/low or momentary), then to your headlight, and finally to ground. An interruption anywhere will cause the light to go out. Since both your hi and low beams are not working, I suspect a bad ground connection somewhere. Probably in your switch, but if it is easier to check the headlight socket I would check that too. Use a multi-meter, see if you have power to the switch. If you do, ground the negative lead coming to the switch and see if your headlight comes on. If it does, you know you have a bad ground.

Posted on May 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

While low beams on the left high beams stays on dim light but wen I turn high beams on they work fine


It could be driving lights mode instead of low beam. Check connections.

Jun 16, 2017 | Cars & Trucks

2 Answers

How do I fix HI beam headlights?


your switch is not good try to double check your switch.

Mar 09, 2015 | Kia Spectra Cars & Trucks

2 Answers

Replaced battery in crv and now headlights don't work


Check the low beam fuse in the fuse box, usually a 20A. If the fuse is blown/shorted during the replacement of the battery, your lights won't work. Replace the fuse if that's your case. Hope this helps.

More help: Moonlight Driving
replaced-battery-in-crv-now-headlights-zp00lepaloflvda1hbduq5xd-4-9.jpg

Dec 29, 2012 | 2006 Honda CR-V

1 Answer

2005 Dodge Magnum low beams do not work


Obviously you have a connector which has come partially apart somewhere between the Headlights and the Headlight Switch. Most modern vehicles have several connectors between the Headlight Switch and the Headlights, Start at the Firewall Connector and work forward toward the Headlights making sure all connectors are securely mated. Another remote possibility is that you have fractured the "Low Beam Filaments" in BOTH Headlights. You don't mention how hard you hit the Speed Bump but if it caused the car to "Bottom Out" the front suspension it was a hard enough impact to fracture the filaments. You can use a 12 Volt Test Light at the Sockets for the Headlight Bulbs and see if you are getting 12 Volt power there. If you are in Low Beam position you have fractured the filaments. Check with High Beam too.

Nov 18, 2011 | 2005 Dodge Magnum

1 Answer

Headlights If on low beams for a while, then switch to high beam, when i go back to low beams- NO headlights of any kind. Complete darkness. High beams will come on but low beams will not come on. If i...


on that year i did not find one either when i rsearched it . so i"am going to say that headlight switch and relay all in one . . but if you have a enigine type fuse box check it anyway or goto headlight swtich and follow the wiring down a bit and see if there is anything connected to it .

Oct 08, 2011 | 1994 GMC Sierra

1 Answer

I have a 2005 dodge caravan. the headlights have


On the van you have a high beam fuse and relay. On the low beam you also have a fuse and relay. Check the fuse/relay panel for a blown fuse controlling the low beam lights. If you do not find a blown fuse have some one to turn the key on and turn on the high beam lights> During this time locate the low beam headlight relay and place your finger on top of relay, have the other person to switch from high beam to low beam lights. You should feel a click in the relay when they make the switch from high to low beam. If not replace the relay and the problem should go away. Hope this will help you.

May 28, 2010 | 2005 Dodge Caravan

1 Answer

2001 Ford Focus - High beam / low beam problem with headlights


just replace the dimmer switch under the column its wore out on the low beam side

Jan 17, 2010 | 2005 Ford Focus

Not finding what you are looking for?
2006 Suzuki DL 650 V-Strom Logo

902 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...