Question about Motorcycles

Open Question

Drive shaft seal - Motorcycles

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace rear seal (drive shaft) on manual trans and started leaking badly


Drive shaft have only one seal and seal rear side on metal bush
1 jak up littil gear box because after shaft remov ing time oil no feldown
2 remove drive shaft rear bolt
3 mesher drive shaft seal touching area
4 mesher drive shaft Bush touching area this area damage want send machine Shoppe bush cover and drive shaft that time send seal also
Damege change that Bush also

Apr 25, 2016 | 1998 Isuzu Amigo

1 Answer

Front diff.seal leaks


Remove the front drive shaft remove the drive yoke off the pinion shaft remove the old seal install new seal install front drive shaft. PS check pinion bearing play before removing drive yolk. if it is loose then you might also need bearings

Oct 21, 2015 | Ford Explorer Cars & Trucks

1 Answer

How to pull auger drive shaft for Hobart 4346 mixer-grinder?


The oil seal is the resistance you feel. take a soft mallet or hammer with a soft drift and gently but firmly tap the stub shaft and it will drive out the oil seal in the hopper direction.The lower skirt of the tapered bearing is what contacts the seal so go slow.
Worked for me.

Jan 23, 2013 | Hobart 4346 Meat Grinder Mixer Chopper...

2 Answers

Rear axle leaks, want to replace seal where drive shaft connects to axle.


A continental is a front wheel drive car since 89. You must mean a town car. The pinion shaft seal is tricky because of a bearing preload issue that can be catastrofic if you get it wrong. I would recomend seeking the skills of a pro.

Jan 16, 2011 | 1997 Lincoln Continental

1 Answer

My drive shaft fell out, after the drive shaft was replaced I loose tramession floid from ware the drive shaft inserts into the tramession. Is this a seal problim and hpw dificult is to repair?


The seal was damanged when you lost the drive shaft. You need to inspect the transmission housing to insure it was not broken. Pull the drive shaft back out, Pry the seal out of the transmission housing and replace seal. Use a socket the same size as the new seal and lightly tap into place. Reinstall the drive shaft and you should be ready to go as long as the transmission housing is not damaged.

Aug 14, 2010 | 1995 Ford F150 Styleside Regular Cab

1 Answer

What is the seal called that is on the drive shaft that turns the front sprocket


It dependes on who you ask or which manual, you read but the main names are
counter shaft seal.
or drive axle oil seal
or drive shaft seal,
or sprocket shaft seal

the transmission shaft that the clutch is on is called main axle, the sprocket shaft is called drive axle\counter shaft

Jun 19, 2010 | 2004 Suzuki RM-Z 250

1 Answer

Leaking fluid from rear end


hello, fluid leaking out of rear end is probably the pinion shaft seal, its were the drive shaft hooks to the rearend, you have to drop drive shaft, take yoke off rearend, or if it is,more further towards the back,were wheels are, then you need axle shaft seal, you have one on both sides on the rearend, behind the drums, where the back brakes are, also look and see if its coming from back of transmission, where drive shaft goes into the transmission, see if you can tell what color fluid is, if its red, its probably rear transmission seal, where drive shaft goes into the transmission.

Apr 08, 2010 | 2003 Kia Sedona

2 Answers

Transmission leaking through drive shaft


the rear seal on the tail shaft must have gotten damaged when you removed the shaft. it is available at any good parts store, easy to change. you have to pull the drive shaft back out, then you can use a small hook / prybar to pull the seal out, then tap the new one into place. pay close attention to the install height of the old seal before you remove it, so you know how far to drive the new seal in. good luck!

Mar 27, 2010 | 1996 GMC Sierra

1 Answer

HOW DO YOU REPLACE THE REAR TRANSMISSON SEAL IN A FORD 2005 F250


Place vehicle on Jack stands, remove drive-shaft, remove old seal with a Seal Puller, place lubricant on inner lip of new seal, install new Seal carefully & do not damage the Output Shaft of Transmission with hammer etc. , reinstall Drive-shaft, lower vehicle, check fluid level, road test vehicle

Oct 28, 2009 | 2005 Ford F 250 Super Duty

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76682 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...