Question about BMW K 100 Motorcycles

1 Answer

Over fueling - K 100 BMW Motorcycles

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • BMW Master
  • 39,932 Answers

Hi, Anonymous for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary, transport your bike to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.
Free BMW Motorcycle Service Manuals for download
BMW Motorcycle Parts Fiche OEM BMW Motorcycle Parts online 1970 present BMW
http://www.bmw-motorrad.com/us/en/index.html?content=http://www.bmw-motorrad.com/us/en/services/manuals/manuals_main.html¬rack=1 http://www.k100.biz/pdf/FAQ/FAQ_K100_tips.pdf
Hints and advice for BMW bike motorcycle owners K1 K75 K100 K1100 bulb...

Posted on Jan 03, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to replace fuel pump on 2005 chevy monte carlo


The pump is in the gas tank, so the tank has to come out.

Apr 28, 2016 | Cars & Trucks

1 Answer

Need info on how to change a 2000 Cadillac


REMOVAL PROCEDURE
TOOLS REQUIRED
A J 34730-1A Fuel Pressure Gauge
A J 39765 Fuel Sender Lock Nut Wrench
CAUTION: Refer to Batterry- Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Relieve the fuel system pressure. Refer to the Fuel Pressure Relief Procedure. See:
Fuel Delivery and Air Induction/Fuel Filter/Fuel Pressure Release/Service and
Repair
3. Drain the fuel tank. Refer to Fuel Tank Draining Procedure. See: Fuel Delivery and
Air Induction/Fuel Tank/Service and Repair/Procedures
4. Remove the fuel tank.
5. Remove the fuel sender assembly.
6. Disconnect the fuel pump electrical connector (5).
7. Remove the fuel level sensor electrical connector retaining clip (6).
8. Disconnect the fuel level sensor electrical connector (7) from under the fuel sender
cover.
9. Remove the fuel level sensor retaining clip (4).
10. Squeeze the locking fangs and remove the fuel level sensor (3).
INSTALLATION PROCEDURE
1. Install the fuel level sensor (3).
2. Install the fuel level sensor retaining clip (4).
3. Connect the fuel level s ens oi electrical connector (7).
4. Connect the fuel level sensor electrical connector retaining clip (6).
5. Connect the fuel pump electrical connector (5).
6. Install the fuel sender assembly.
7. Install the fuel tank.
8. Refill the fuel tank.
9. Install the fuel filler cap.
10. Connect the negative battery cable.
11. Inspect for leaks.
11.1. Turn ON the ignition for 2 seconds.
11.2. Turn OFF the ignition for 10 seconds.
11.3. Turn ON the ignition.
11.4. Inspect for fuel leaks. 55dcc1df-120b-4a37-b63b-a35953989584.png

Aug 29, 2014 | Cars & Trucks

1 Answer

Fuel Rail Leak


Did did you change the o-ring at the fuel line to fuel rail connector? Do that before you change the fuel rail. According to an e-bay seller who is selling a used fuel rail from his salvage shop, the following fuel rails are interchangeable.
300 05-10 Fuel Injector; 2.7L and 3.5L
AVENGER 08-10 Fuel Injector; 2.7L
AVENGER 08-10 Fuel Injector; 3.5L
CARAVAN 08-10 Fuel Injector; 4.0L
CHALLENGER 09-10 Fuel Injector; 3.5L
CHARGER 06-10 Fuel Injector; 2.7L and 3.5L
JOURNEY 09-10 Fuel Injector; 2.7L
JOURNEY 09-10 Fuel Injector; 3.5L
MAGNUM 05-08 Fuel Injector; 2.7L and 3.5L
NITRO 07-11 Fuel Injector; 4.0L
PACIFICA 05-06 Fuel Injector; 3.5L
PACIFICA 07-08 Fuel Injector; 4.0L
SEBRING 04 Fuel Injector; Conv, 2.7L, from 07/30/03
SEBRING 04 Fuel Injector; Sdn, 2.7L, from 07/30/03
SEBRING 05 Fuel Injector; Conv, 2.7L
SEBRING 05 Fuel Injector; Sdn, 2.7L
SEBRING 06 Fuel Injector; (Conv, Sdn), 2.7L
SEBRING 07 Fuel Injector; (Sdn), 2.7L
SEBRING 07 Fuel Injector; (Sdn), 3.5L
SEBRING 08-10 Fuel Injector; (Conv, Sdn), 2.7L
SEBRING 08-10 Fuel Injector; (Conv, Sdn), 3.5L
STRATUS 04 Fuel Injector; Sdn, 2.7L, from 07/30/03
STRATUS 05 Fuel Injector; Sdn, 2.7L
STRATUS 06 Fuel Injector; (Sdn), 2.7L
TOWN & COUNTRY 08-10 Fuel Injector; 4.0L

Mar 04, 2014 | 2007 Chrysler Pacifica Touring

1 Answer

Location of and how to remove and replace - 2002 DeVille Sending Unit/Fuel Pump Module (4.6L engine)


These units are in the tank and must be dropped in order to replace.


WARNING Do not handle the fuel sender assembly by the fuel pipes. The amount of leverage generated by handling the fuel pipes could damage the joints.

  1. Relieve the fuel system fuel pressure, as outlined in the Fuel System Section.
  2. Drain the fuel tank to at most 3/4 of a tank full.
  3. Raise the vehicle.
  4. Remove the fuel tank.
    NOTE The modular fuel sender support assembly will spring-up when the locking ring is moved.
  5. Remove the fuel sender assembly using tool J39765 Fuel Sender Locknut Wrench or an equivalent.
  6. Note the position of the fuel sender strainer for installation.
  7. Support the reservoir with one hand and grasp the fuel sender strainer with the other hand.
  8. Pull the external fuel sender strainer off of the fuel sender.
  9. Inspect the fuel sender strainer. If the fuel sender strainer is contaminated, the fuel tank should be cleaned.
  10. Discard the fuel sender strainer after inspection.
  11. Disassemble the electrical connectors from the fuel level sensor assembly of the fuel pump and cover assembly.
  12. Disassemble the fuel level sensor assembly.

    0996b43f802054cc.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. Fuel level sending unit on fuel sender (fuel pump) module.


To install:
  1. Assemble the fuel level sensor assembly.
  2. Assemble the electrical connectors to the fuel pump and cover assembly.
  3. Position the new fuel sender strainer on the modular fuel sender and push on the outer edge of the fuel sender strainer until the fuel sender strainer is fully seated on to the sender assembly.
  4. Install the fuel sender assembly into the fuel tank using tool J39765 Fuel Sender Locknut Wrench or an equivalent.
  5. Reinstall the fuel tank.
  6. Lower the vehicle.
  7. Add fuel to the fuel tank.
  8. Connect the negative battery cable.
  9. Reinstall the fuel tank filler pipe cap.
  10. Inspect for fuel leaks.
  11. Turn the ignition switch ON for 2 seconds.
  12. Turn the ignition switch OFF for 5 seconds.
  13. Turn the ignition switch ON .
  14. Check for fuel leaks.

Oct 26, 2010 | 2002 Cadillac Deville

1 Answer

How do I change a fuel pump on a 2002 yukon


Need to know the size of the engine but this is a picture of what it is....


Posting the rest of the directions for you:


1cf4b2b.gif
Illustrating fuel pump and sending unit sensor (3) on 2000-2004 4.8L, 5.3L, 6.0L Engines

Removal & Installation
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Remove or disconnect the following:
    • Negative battery cable
  3. Relieve the fuel system pressure.
  4. Drain the fuel tank.
  5. Remove or disconnect the following:
    • Fuel tank

    WARNING Do not handle the fuel sender assembly by the fuel pipes. The amount of leverage generated by handling the fuel pipes could damage tool Joints.

  6. Disconnect the fuel and evaporative emission (EVAP) lines from the fuel tank module.
  • Fuel sender assembly retaining ring using a fuel tank sending unit wrench. Remove the fuel sender assembly and the seal. Discard the seal.
  • Note the position of the fuel strainer on the fuel sender. Support the fuel sender assembly with one hand and grasp the strainer with the other hand. Pull the strainer off the fuel sender. Discard the strainer after inspection. Inspect the strainer. Replace a contaminated strainer and clean the fuel tank.
  • Fuel pump electrical connector
  • Electrical connector retaining clip from the fuel level sensor
  • Sensor electrical connector from under the fuel sender cover
  • Fuel level sensor retaining clip
  • Squeeze the locking tangs and remove the fuel level sensor.
  • Remove the fuel pressure sensor.
  • To install:
    1. Install or connect the following:
      • Fuel pressure sensor
      • Fuel level sensor
      • Sensor retaining clip
      • Electrical connector to the fuel level sensor
      • Electrical connector retaining clip to the fuel level sensor
      • Fuel pump electrical connector

      NOTE Always install a new fuel strainer when replacing the fuel tank fuel pump module.

      • New fuel strainer in the same position as noted during disassembly. Push the strainer on the bottom of the fuel sender until the strainer is fully seated.
      • New seal on the fuel tank

      NOTE The fuel pump strainer must be in a horizontal position when the fuel sender is installed in the tank. When installing the fuel sender assembly, assure that the fuel pump strainer does not block full travel of the float arm.

      • Fuel sender assembly into the fuel tank
      • Fuel sender assembly retaining ring
      • Fuel tank. Install the fuel tank strap attaching bolts. Tighten the bolts to 30 ft. lbs. (40 Nm).
    2. Refill the fuel tank. Install the fuel filler cap. Connect the negative battery cable.
    3. Turn the ignition ON for 2 seconds.
    4. Turn the ignition OFF for 10 seconds.
    5. Turn the ignition ON.
    6. Inspect for fuel leaks.

    Sep 13, 2010 | 2002 GMC Yukon Denali

    2 Answers

    How to change the fuel filter on a suzuki grand vitara 2.0td with RHZ engine


    Fuel FIlter - Removal
    1. Relieve fuel system pressure.
    2. Remove or disconnect the following:
      Negative battery cable Fuel lines from the fuel filter Fuel filter
    To install:
    1. Install or connect the following:
      Fuel filter and tighten the bracket bolt. Note the fuel flow directional arrow. Fuel lines to the fuel filter. Negative battery cable
    2. Start the engine and inspect the fuel filter connections for leaks.

    1. Before servicing the vehicle, refer to the Precautions section.
    2. Relieve fuel system pressure.
    3. Remove or disconnect the following:
      Negative battery cable Fuel lines from the fuel filter Fuel filter
    To install:
    1. Install or connect the following:
      Fuel filter and tighten the bracket bolt. Note the fuel flow directional arrow. Fuel lines to the fuel filter. Negative battery cable
    2. Start the engine and inspect the fuel filter connections for leaks.
    Fuel filter is incorporated in fuel pump assembly in fuel tank.

    Hope this help.

    May 15, 2010 | 2003 Suzuki Grand Vitara

    1 Answer

    Where do I find the fuel pressure regulator and how to change it on a 2001 hyundai xg300


    The fuel pressure regulator is built in to the fuel pump

    f89c7c1.gif
    Fuel tank and fuel pump assembly—XG 300

    1. Before servicing the vehicle, refer to the Precautions section.
    2. Relieve the fuel system pressure.
    3. Drain the fuel tank.
    4. Remove or disconnect the following:
      • Negative battery cable
      • Fuel supply, return and vapor lines
      • Fuel fill and vent hoses
      • Fuel pump module connector
      • Fuel level sender connector
      • Fuel tank straps
      • Fuel tank
      • Fuel pump module
    To install:
    1. Install or connect the following:
      • Fuel pump module and torque the mounting bolts to 12–24 inch lbs. (1–3 Nm)
      • Fuel tank
      • Fuel tank straps
      • Fuel level sender connector
      • Fuel pump module connector
      • Fuel fill and vent hoses
      • Fuel supply, return and vapor lines
      • Negative battery cable
    2. Fill the tank with fuel and check for proper fuel pump operation.

    Jan 10, 2010 | 2001 Hyundai XG300

    1 Answer

    REPLACEMENT of a fuel filter on a 1997


    cd7cd12.gif
    The fuel filter (1) is mounted next to the fuel pump module (2), on top of the fuel tank (3)


    The fuel delivery system uses quick-connect fittings. The fuel filter mounts to the top of the fuel tank.
    1. Properly relieve the fuel system pressure.
    2. Disconnect the negative battery cable.
    3. Raise and safely support the vehicle.
    4. Place a drain pan underneath the fuel filter to catch any spilling fuel that will result from disconnecting the fuel lines.
    It may be necessary to support the weight of the fuel tank with a block of wood and a floor jack. Once this is accomplished, loosen, but do not remove, the fuel tank strap bolts. Allow the fuel tank to lower just enough to access the fuel line fittings at the fuel pump module.

    6036176.gif

    Disengage the fuel line quick-connect fittings from the fuel pump module

    02627d0.gif
    Be sure to place a drain pan underneath the filter line fittings to catch all fuel spillage

    Locate the fuel filter in its mounting on top of the fuel tank. Detach the quick-connect fittings from the chassis fuel supply tube and fuel pump module by squeezing the quick-connect fitting retainer tabs together and pulling the fitting assembly away from the fuel line nipple. The retainer will remain on the fuel tube.

    df40422.gif
    Using a 10mm socket, remove the fuel filter mounting bolt ...

    e9542f8.gif
    ... then remove the fuel filter from the top of the fuel tank

    1. Remove the fuel filter mounting bolt and remove the fuel filter from the fuel tank.
    To install:
    1. Install the fuel filter on the top of the fuel tank and tighten the mounting bolt.
    2. The fuel supply tube (to chassis fuel line), return tube (to pump module) and fuel supply (to fuel filter) tube are permanently attached to the fuel filter. The quick-connect fitting ends of the fuel supply and return tubes are of different sizes.
    3. Apply a light coating of 30W engine oil to the nipples of the fuel filter.
    4. Push the quick-connect fitting over the fuel line until the retainer seats and clicks into place. Be sure the retainer tabs have locked into the case of the fitting.
    5. If necessary, raise the fuel tank and tighten the fuel tank strap bolts.
    6. Lower the vehicle. Start the engine and check for leaks.

    Nov 30, 2009 | 1997 Chrysler Town & Country

    1 Answer

    Replace fuel pump for 2002 gmc sierra 2500


    First...this is where the pump is (gas tank) on the engines listed:

    6f9f9d7.gif

    Illustrating fuel pump and sending unit sensor (3) on 1999-2005 4.8L, 5.3L, 6.0L Engines


    Removal & Installation
    1. Before servicing the vehicle, refer to the Precautions section.
    2. Remove or disconnect the following:
      • Negative battery cable
    3. Relieve the fuel system pressure.
    4. Drain the fuel tank.
    5. Remove or disconnect the following:
      • Fuel tank
    8e4564e.gif
    WARNING Do not handle the fuel sender assembly by the fuel pipes. The amount of leverage generated by handling the fuel pipes could damage the joints.

    • Fuel sender assembly retaining ring using a fuel tank sending unit wrench. Remove the fuel sender assembly and the seal. Discard the seal.
  • Note the position of the fuel strainer on the fuel sender. Support the fuel sender assembly with one hand and grasp the strainer with the other hand. Pull the strainer off the fuel sender. Discard the strainer after inspection. Inspect the strainer. Replace a contaminated strainer and clean the fuel tank.
    • Fuel pump electrical connector
    • Electrical connector retaining clip from the fuel level sensor
    • Sensor electrical connector from under the fuel sender cover
    • Fuel level sensor retaining clip
  • Squeeze the locking tangs and remove the fuel level sensor.
  • Remove the fuel pressure sensor.
  • To install:
    1. Install or connect the following:
      • Fuel pressure sensor
      • Fuel level sensor
      • Sensor retaining clip
      • Electrical connector to the fuel level sensor
      • Electrical connector retaining clip to the fuel level sensor
      • Fuel pump electrical connector
      NOTE Always install a new fuel strainer when replacing the fuel tank fuel pump module.

      • New fuel strainer in the same position as noted during disassembly. Push the strainer on the bottom of the fuel sender until the strainer is fully seated.
      • New seal on the fuel tank
      NOTE The fuel pump strainer must be in a horizontal position when the fuel sender is installed in the tank. When installing the fuel sender assembly, assure that the fuel pump strainer does not block full travel of the float arm.

      • Fuel sender assembly into the fuel tank
      • Fuel sender assembly retaining ring
      • Fuel tank. Install the fuel tank strap attaching bolts. Tighten the bolts to 30 ft. lbs. (40 Nm).
    2. Refill the fuel tank. Install the fuel filler cap. Connect the negative battery cable.
    3. Turn the ignition ON for 2 seconds.
    4. Turn the ignition OFF for 10 seconds.
    5. Turn the ignition ON.
    6. Inspect for fuel leaks

    Oct 25, 2009 | 2002 GMC Sierra 1500

    Not finding what you are looking for?
    Motorcycles Logo

    Related Topics:

    73 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top BMW Experts

    Arnie Burke
    Arnie Burke

    Level 3 Expert

    4514 Answers

    yadayada
    yadayada

    Level 3 Expert

    74945 Answers

    phil cuzins
    phil cuzins

    Level 2 Expert

    79 Answers

    Are you a BMW Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...