Question about Motorcycles

Open Question

Fit new wire in aldus handy 200

The problem is that the trimmer wire did not stay on the spool

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 313 Answers

SOURCE: Can't find spool replacement AF-150-04

not sure but .065 maybe

Posted on Jul 09, 2008

  • 3 Answers

SOURCE: Black & Decker Grass Hog Electric Trimmer

How do you replace the white lever, and how do you know if it is broken?

Posted on Jul 14, 2008

SOURCE: Worx WG150 Cordless Grass Trimmer spool nut keeps falling off

Thanks for update. Glad you got some resolution.

Would you mind rating my response?

thanks...

Charlie

Posted on May 30, 2009

#1 Taper
  • 1040 Answers

SOURCE: adding trimmer line to spool on husqvarna trimmer-two strings

Cut two separate pieces of string, about 7 ft. each.

Stick the end of the line in the hole on the inside of spool.

Wind clockwise onto spool, putting the line that is closest to the ground on first.

Once you have winded this piece on, lock the last 4 inches of line through the slits on spool.

Repeat process for second piece of line, locking the last 4 inches in slot opposite the other locked in piece.

Put the spool on the trimmer, feeding the end of lines through either hole on trimmer.

Before you push the spool all the way on, pull the strings out of the locked position. Put cap on and GO CRAZY!

Jim

Posted on Jun 19, 2009

thydzik
  • 86 Answers

SOURCE: How do you fit a new spool?

refer to here for generic instructions of replacing the wire/string on a trimmer.

http://wiki.answers.com/Q/How_do_you_replace_a_weed_eater_trimmer_line

have a read through, it may help assist you.

Posted on Jul 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I NEED A SPOOL COVER WHERE CAN I GET IT ?


How to make a spool cap cover for an American Gardener YS24 (Weedeater XLT24) Trimmer

If you've tried to buy parts lately for your trimmer, you've noticed they are harder and harder to find. In fact, I was unable to find a spool cap cover, so I came up with this work-around.

Before you start this project, it's important to save any parts from the old spool cover-especially the top, if you can. The top is needed to make a spacer for the new cover that will still allow you to "bump" out the string.

I used a Craftsman 71-64215 replacement spool retainer to make my new spool cover cap. It fits the Craftsman C3 19.2 volt 74381 String Trimmer (CRAC06540 spool cap). I found this cap at a local Ace Hardware, but apparently it is also getting hard to find-I googled the Ace Hardware number to find it on the web-"7314644 cap." I bought a couple extra from HardwareDistributors.com. Note that the diameter of the cover at the tabs is the same diameter of the old cover-although the diameter of the cap is slightly larger.

Take the old cover, and using the tab from the old cover, mark a line on the new tabs the same width as the old. Make sure you center the old tab on the new tab so you will remove the same amount of plastic from each side of the new tab. I used a dremel tool with the cutoff wheels to cut the tabs on the new cap to the same size as the old cap.

If you look at the new cap, there is a round plastic circle ridge on the bottom of the cap. If you look closely you can see a slight indention, or discoloration on the top of the new cap matching the circle on the bottom. You need to cut the plastic out of the new cap matching the plastic circle. I used a dremel tool with a metal cylindrical grinder to do that.

Once you get everything cut, put the old cap into the new cap so that the spokes face down toward the similar spokes on the top of the spool. You may have to trim the old cap so it fits into the new cap.

Finally, snap everything together into your trimmer-don't forget the spring. Note that the new cap has about a 1/8 inch gap above the spool. However, this doesn't seem to affect the trimmer-and you can still "bump" the head to eject the string.

Apr 27, 2015 | American Gardener Get the lower price on...

1 Answer

Toro tb65ss upper string head removal


  1. Pull the spark plug wire from the top of the spark plug. Bend the wire to the side to prevent accidental starting.
  2. Place trimmer on its side with the trimmer spool head facing you. Press the two tabs on the side of the spool head with your fingers.
  1. Hold side of the head and slowly allow the head cover to push away from the inside of the spool head. There is a spring between the spool head housing and the spool that pushes out when releasing the cover.
  1. Pll the knob and spool out of the spool head. The spring should come out on the back of the spool.
    Electric Trimmer
  1. 1 --> Unplug the Toro trimmer power cord from the electrical outlet.
  2. 2 --> Lay the trimmer on its side. Hold the spool housing tight in one hand and twist the cap counterclockwise with your fingers. If necessary, use a pair of large slip joint pliers to start turning the cap. The cap is the center piece of the spool.
  3. 3 --> Pull the cap off the spool and remove the spool from the housing.

Apr 26, 2014 | Garden

1 Answer

Need parts for American Gardner Yardstick model YS24. Specificly the line head assembly.


How to make a spool cap cover for an American Gardener YS24 (Weedeater XLT24) Trimmer

If you've tried to buy parts lately for your trimmer, you've noticed they are harder and harder to find. In fact, I was unable to find a spool cap cover, so I came up with this work-around.

Before you start this project, it's important to save any parts from the old spool cover-especially the top, if you can. The top is needed to make a spacer for the new cover that will still allow you to "bump" out the string.

I used a Craftsman 71-64215 replacement spool retainer to make my new spool cover cap. It fits the Craftsman C3 19.2 volt 74381 String Trimmer (CRAC06540 spool cap). I found this cap at a local Ace Hardware, but apparently it is also getting hard to find-I googled the Ace Hardware number to find it on the web-"7314644 cap." I bought a couple extra from HardwareDistributors.com. Note that the diameter of the cover at the tabs is the same diameter of the old cover-although the diameter of the cap is slightly larger.

Take the old cover, and using the tab from the old cover, mark a line on the new tabs the same width as the old. Make sure you center the old tab on the new tab so you will remove the same amount of plastic from each side of the new tab. I used a dremel tool with the cutoff wheels to cut the tabs on the new cap to the same size as the old cap.

If you look at the new cap, there is a round plastic circle ridge on the bottom of the cap. If you look closely you can see a slight indention, or discoloration on the top of the new cap matching the circle on the bottom. You need to cut the plastic out of the new cap matching the plastic circle. I used a dremel tool with a metal cylindrical grinder to do that.

Once you get everything cut, put the old cap into the new cap so that the spokes face down toward the similar spokes on the top of the spool. You may have to trim the old cap so it fits into the new cap.

Finally, snap everything together into your trimmer-don't forget the spring. Note that the new cap has about a 1/8 inch gap above the spool. However, this doesn't seem to affect the trimmer-and you can still "bump" the head to eject the string.

Sep 01, 2013 | Weedeater Garden

1 Answer

Stihl fs trimmer line fitting how to fit line to trimmer can you help anyone


If it is a duel line trimmer then:

Cut two separate pieces of string, about 7 ft. each.

Stick the end of the line in the hole on the inside of spool.

Wind clockwise onto spool, putting the line that is closest to the ground on first.

Once you have winded this piece on, lock the last 4 inches of line through the slits on spool.

Repeat process for second piece of line, locking the last 4 inches in slot opposite the other locked in piece.

Put the spool on the trimmer, feeding the end of lines through either hole on trimmer.

Before you push the spool all the way on, pull the strings out of the locked position.

If it is a single line trimmer: Then just wind a single piece of string clockwise onto spool. This may need to be longer than 7ft.

If you need more help, let me know.

Jim

Nov 20, 2009 | Garden

2 Answers

Where can i buy a replacement spool


do you mean the spool or the trimmer 'wire'? the wire itself can be bought at most DIY shops and then fitted to your spool, which is removable. if you need the spool, contact the maufacturer, or do a web search.

Sep 12, 2009 | Garden

1 Answer

725r trimmer


You can buy new Line to re-spool on your existing head

Aug 17, 2009 | Ryobi 30 Cubic Centimeter Curved Shaft Gas...

1 Answer

How do you fit a new spool?


refer to here for generic instructions of replacing the wire/string on a trimmer.

http://wiki.answers.com/Q/How_do_you_replace_a_weed_eater_trimmer_line

have a read through, it may help assist you.

Jul 21, 2009 | Black & Decker Garden

1 Answer

How do you fit the nylon line to the strimmer part.is there a diagram or a video somewhere.my line keeps coming out everytime i turn it on.thanks


try taking off the spool at the end of the trimmer and wineing the line around the spool and putting the spool back on the end of the trimmer

Apr 06, 2009 | Garden

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...