Question about Harley Davidson FXDWG Dyna Wide Glide Motorcycles

1 Answer

No front brake preasure - FXDWG Dyna Wide Glide Harley Davidson Motorcycles

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 503 Answers

Hi you need to check fluid level. Then check the system for lesks and for air. Did you loose pressure suddenly??

Posted on May 07, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When i come to a stop it feels & and sounds like the abs is kicking in. both front & and rear shoes & and rotors are like new


Was the Brakes just changed, and if so was they bled. If the ABS is messing up the light would be on in the dash. If your getting back preasure when your stepping on the Brakes you could have air in system,they need bled. sometimes to reset there is a ( I call a little Nil) on brake cylinder just below where you put oil in, while someone steps on brakes you take something with a flat edge andpush the nil in at same time. It sets the equal Preasure of front to back of brake s.

Dec 05, 2014 | 2003 Chevrolet Silverado 1500

1 Answer

New master cylinder and brake line on 2002 wide glide no brake preasure wheel turnes no brake preasure what next


First thing, is the bleeder valve on the caliper at the wheel in the high position?
If it's on the lower part of the caliper, air will be trapped above it.
Sometimes, a brake vacuum bleeder works better than the traditional way:

http://www.harborfreight.com/brake-bleeder-and-vacuum-pump-kit-69328.html

After bleeding all the air you can, leave it overnight with the pedal/lever (you didn't state if the front or rear brake) tywrapped in the ON position overnight.

IF it's the rear brake, make sure there's a slight amount of play before the rod to the pedal engages the master cylinder piston (if not, it won't allow the piston to fully return).

Jan 01, 2014 | 2002 Harley Davidson FXDWG Dyna Wide Glide

1 Answer

No front brake preasure 2002 wide glide


Sounds like you need to bleed the brake system.

Jan 01, 2014 | 2002 Harley Davidson FXDWG Dyna Wide Glide

1 Answer

No front brake preasure on 2002 wide glide


Sounds like the master cylinder is defective or you need to bleed the system. Did you possibly add in the wrong type of brake fluid and destroy all rubber components in the sytem???

Jan 01, 2014 | Harley Davidson FXDWG Dyna Wide Glide...

1 Answer

No preasure at rear brakes


You either have a bad master cylinder or you have a LOT of air in the lines to your rear brakes.

Feb 19, 2012 | 1997 Dodge Dakota

1 Answer

88 t-bird non abs. the front brakes drag. i have replaced all rubber lines also new master cyl. new front brake calipers. rear brake hose preasure will bleed of after it has set for 15 to 20 min.can...


This is bizarre... I'm suspecting dirt in line(s). Are you bleeding correctly? Starting w/ Right rear, left rear, right front, then left front. You might try using a power bleeder also. A possible long shot, is brake proportioning valve sticking.

Mar 21, 2011 | Ford Thunderbird Cars & Trucks

1 Answer

Front brakes no preasure ??


Sounds like air in the master cylinder, bleed the front brakes till there is no air and try them. If there is still no pressure then more then likely, you need to replace the master.

May 02, 2009 | 1996 Suzuki VS 1400 Intruder

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

Mike

Level 3 Expert

4339 Answers

yadayada
yadayada

Level 3 Expert

76051 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...