Question about Honda Motorcycles

Open Question

Honda wave dash clutch problem - Honda Motorcycles

Posted by Anonymous on

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:


Make your HOnda Wave/C70/C90/C100 Faster!!

A great and simple way to improve the performance it to super size the barrel and get a big piston.

These bikes will take a bore that can accomodate the Wave 125, CBR 150, Kawasaki 150 pistons. For a 110 wave you can simply over bore the barrel at a machine shop if you give them the piston and they can measure it.

This is a cheap and effective mod. I suggest you also upgrade to a Honda Dash Carb. its better suited to the new swept volume. Removing baffels from the Exhaust will help too.

These are the simplest mods for more power!

on May 02, 2010 | Motorcycles

1 Answer

Clutch lining symptoms for wave dash?

When a clutch wears out, the plate and the pads don't meet and you get slippage, this results in loss of acceleration and soon they wont meet enough to move the unit at all. You can also smell the pads burning from heat

Nov 19, 2016 | Honda Cars & Trucks

1 Answer

85 Honda Gold wing 1200 in neutral light and motorcycling have to have clutch pulled in to start

I always pull in the clutch as a matter of habit :) but check the wiring path from the neutral sender switch on the clutch; one part goes to the dash light but the other goes to the starter circuit. Pulling in the clutch sends the "safe to start" signal that the neutral switch fails to send.

Nov 02, 2016 | Honda Motorcycles

1 Answer

How to engage ac clutch on a 2004 honda accord

Clutch is controlled by dash board switches and a relay. If the clutch does not engage it could be due to low freon. You can get a recharge kit with a gauge at your local auto parts store.

Aug 19, 2012 | 2004 Honda Accord

2 Answers

Honda wave 100 transmission oil change

Honda recommend changing the oil after the first 1000km and at 4000km therafter every 4000km
If you do not have a manual you can get some tips here

Jul 05, 2012 | 2005 Honda NF 100 Wave

1 Answer

Where is the clutch valve located on a 95 honda accord

clutch master cylinder is located drivers side firewall,right next to brake master cylinder. it has small shot glass size fluid resevoir mounted above it,fluid is fed through hose down into clutch master. clutch master cylinder has a rod mounter on ft of it that goes through firewall and attaches to clutch pedal under dash . clutch slave cylinder is mounted on ft passenger side of transmission assy. most common leak is from master cylinder,you would be able to look under dash ,follow clutch pedal up to where it attatched to clutch master pushrod.follow that rod to wear it meets up to a small 1 1/2" or so rubber boot.fluid will be leaking from that boot if master is leaking.

Jul 03, 2009 | 1995 Honda Accord

1 Answer

1996 honda accord clutch goes all the way to the floor

check the slave and clutch master cylinder for leakage. look under the dash , at the clutch master) push rod attached to the clutch pedal) . try to see if there are any leaks around it. if so have it replaced and have the system bled to remove all fluid and air stuck in the system.

Apr 04, 2009 | 1996 Honda Accord

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers


Level 3 Expert

75077 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides