Question about 2006 BMW K 1200 S

1 Answer

Rear wheel removal k1200s 2006

Rear wheel removal

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • BMW Master
  • 48,692 Answers

Hi, Anonymous I am sorry you can't find the first and best tool you ever bought for your BMW but despair not for a mere $0 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.
MAX BMW Garage R1200RT Rear Wheel Removal
BMW Service Rear Wheel Removal Installation
2005 2008 BMW K1200R K1200RS Service Manual Moto Data Proj
BMW Motorcycle Parts Fiche OEM BMW Motorcycle Parts online 1970 present BMW
http://www.bmw-motorrad.com/us/en/index.html?content=http://www.bmw-motorrad.com/us/en/services/manuals/manuals_main.html¬rack=1

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Posted on Jan 03, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Change front wheel bearing on 2006 volkswagon jetta statonwagon


Remove wheel. remove the drive shaft. remove the break caliper and set to the side. Remove the break disc and the backing plate. At the rear of the hub there are 4 size 16 multi inhex bolts, remove these and the wheel bearing assembly will come out( may need a small tap to loosen). assemble in reverse order.

Oct 15, 2014 | 2006 513253 VW Jetta Front Wheel Bearing &...

1 Answer

How to remove 2008 rear wheel fatboy


To remove a 2008 Softail rear wheel FIRST block motorcycle underneath the frame so that theweight of the motorcycle is off of the rear wheel, remove saddlebags if equipped, remove the belt guard and the debris deflector from the rear fork, inspect the wheel bearing end play and service the bearings if and as necessary, label the wheel spacers for left or right locationand orientation i.e. fork side or wheel side, remove the rear brake caliper from the caliper mount and support it using an elastic cord or such,For the FXCW/C modelsthe nut retainer will remain in the axle nut and does not need to be removed and if it is removed it must be replaced. For all but FXCW/C remove e-clip, remove the rear axle nut, and for FXCW/C remove the rear axle nut, loosen both axle adjuster screws an equal number of turns to remove tension from drive belt, with a suitable drift or other tool tap the axle towards the right side and remove it, remove the spacers and the caliper mounting bracket, move the wheel forward and slip the belt off of the sprocket, raise the motorcycle to allow enough clearance for removal of the rear wheel and pull the wheel with the belt sprocket from the rear fork.

To install a 2008 Softail rear wheel FIRST apply a light coat of wheel bearing grease to the axle, to the bearing bores and to the bore of the inner sleeve, roll the wheel into place in the rear fork and slide the drive belt over the drive sprocket, position the left bearing spacer between the wheel and the fork, from the right side carefully insert the axle (with its washer for FXCW/C models) through the right rear fork, the short spacer, the rear caliper mounting bracket, the long spacer and into the bearing bore, continue sliding the axle through the wheel hub sleeve, the left side spacer and the left rear of the fork, install the washer, the axle nut, and the retainer, verify correct axle alignment and the check belt deflection, check the wheel bearing end play after tightening the axle nut to the specified torque because excessive end play can adversely affect stability and handling and insufficient end play can cause bearing seizure, tighten the axle nut to 95-105 ft-lbs (128.8-142.5 Nm), install the belt guard and the debris deflector, install the brake caliper and pads, install the saddlebags, if equipped, pump the brake pedal to move the pistons out until they contact both brake pads, verify the piston location against pads, verify the position of the brake pads against the brake disc, rotate the wheel to check for any interference(s) or misalignment(s) and test the brakes for proper operation.

May 12, 2014 | 2004 Harley Davidson FLHTCUI Electra Glide...

1 Answer

Rear wheel on 2006 k1200s stuck on hub


you may have to use brute force and pull it off. Check the reason for the problem but I suspect that the hole in the rim is too small for the hub

Dec 31, 2013 | Cars & Trucks

1 Answer

Remove rear wheel


You need an air ratchet gun to remove the wheel's bolt but alternatively you can use your rear brake to hold the wheel still and use a plain ratchet.After you have loosen the wheel's bolt, remove the exhaust and the rear brake caliper and the wheel is out.

Feb 05, 2012 | 2006 Kymco Bet and Win

1 Answer

2006 Honda Pantheon how to remove the rear wheel


Hi, Elizabeth for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
How to remove the rear wheel on Honda PANTHEON
Removing the Rear Wheel from Honda PCX125i
http://www.family-motorsports.net/GY6-50cc-150cc.pdf
https://www.partsfish.com/page/oem-parts-for-honda
Honda PCX125 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Oct 03, 2011 | 2006 Honda Pantheon

1 Answer

Need instructions on installing an indicator #7l2z2c182a for 2006 Ford Explorer


SECTION 206-09: Vehicle Dynamic Systems 2006 Explorer/Mountaineer Workshop Manual REMOVAL AND INSTALLATION Procedure revision date: 11/03/2007 Wheel Speed Sensor Ring - Rear adobe.gif Printable View (134 KB)
Special Tool(s) st2132a.jpg Installer, Wheel Speed Sensor Ring
206-084/1 st1515a.jpg Installer, Wheel Speed Sensor Ring
206-084/2
n0078683.jpg
Item Part Number Description 1 2C182 Wheel speed sensor ring 2 4K138 Halfshaft Removal
  1. Remove the rear halfshaft. For additional information, refer to Section 205-05.
  1. Using a suitable driver, remove the ABS wheel speed sensor ring.
Installation
  1. Install the new ABS wheel speed sensor and the Wheel Speed Sensor Ring Installers on the halfshaft as shown.
    n0078685.jpg
  1. Using the Wheel Speed Sensor Ring Installers, install the ABS wheel speed sensor ring as shown.
    n0078686.jpg
    n0078691.jpg

Sep 28, 2011 | 2006 Ford Explorer

1 Answer

Procedure for replacing rear whl brgs on a 2003 escape awd


4-Wheel Drive
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Remove or disconnect the following:
    • Negative battery cable
    • Rear wheel
    • Rear brake shoes
    • Rear halfshaft nut and loosen the halfshaft from the hub
    • Wheel hub and place it in a vise
    • Inner wheel bearing race from the hub
    • Antilock Brake System (ABS) sensor bracket and move the sensor aside, if equipped
    • Parking brake cable from the steering knuckle
    • Brake line from the wheel cylinder and support the knuckle
    • Lower shock absorber nut
    • Lower ball joint by holding the ball joint stud
    • Upper ball joint
    • Coil spring while noting the location of the insulator
    • Steering knuckle cam
    • Steering knuckle
    • Snapring and press out the outer wheel bearing race from the knuckle
      06017-esca-g92.gif

      Rear hub and bearing
      Click to Enlarge

To install:

  1. Install or connect the following:
    • New wheel bearing into the steering knuckle
    • Snapring to the knuckle
    • Wheel hub
    • Steering knuckle cam and hand tighten the bolt
    • Coil spring
    • Shock absorber lower nut. Torque the nut to 85 ft. lbs. (115 Nm) for 2002-04 models; 129 ft. lbs. (175 Nm).
    • Upper ball joint. Torque the nut to 76 ft. lbs. (103 Nm).
    • Lower ball joint. Torque the nut to 76 ft. lbs. (103 Nm). Align the steering knuckle cam and torque the bolt to 85 ft. lbs. (115 Nm).
    • Brake line to the wheel cylinder. Torque the brake line bracket bolt to 15 ft. lbs. (20 Nm) and the brake line fastener to 11 ft. lbs. (15 Nm).
    • Parking brake cable to the backing plate. Torque the bolt to 16 ft. lbs. (22 Nm).
    • ABS sensor bracket. Torque the bolt to 80 inch lbs. (9 Nm), if equipped
    • Halfshaft nut. Torque the nut to 214 ft. lbs. (290 Nm).
    • Brake shoes
    • Rear wheel
    • Negative battery cable
  2. Fill and bleed the brake system.
  3. Check and adjust the wheel alignment as needed.

2-Wheel Drive
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Remove or disconnect the following:
    • Negative battery cable
    • Rear wheel
    • Rear brake drum
    • Wheel hub nut
    • Wheel hub
    • Inner wheel bearing race from the hub
    • Snapring
    • Wheel bearing outer race from the knuckle
      06017-esca-g92.gif

      Rear hub and bearing
      Click to Enlarge 06017-esca-g93.gif

      Rear hub removal
      06017-esca-g94.gif

      Inner wheel bearing removal-rear hub/bearing
      06017-esca-g95.gif

      Rear wheel bearing removal-2wd
      06017-esca-g96.gif

      Rear wheel bearing removal-4wd

To install:
Install or connect the following:

  • Wheel bearing in to the knuckle
  • Snapring
  • Wheel hub into the wheel bearing
  • Wheel hub nut. Torque the nut to 214 ft. lbs. (290 Nm).
  • Brake drum
  • Rear wheel
  • Negative battery cable
    06017-esca-g97.gif

    Rear wheel bearing installation
    06017-esca-g98.gif
    hope this helps if so send testimonial comment or even any other questions you have

Jan 16, 2011 | Ford Escape Cars & Trucks

1 Answer

Removal of rear wheel on Suzuki VL800 to repair puncture


In order to remove the rear wheel assembly, you are going to need a motorcycle lifting jack stand or similar device.

1. Stand the bike on the side stand

On the left side of the rear wheel:

2. Remove the 2 froward facing bolts.
3. Remove the allen head bolt with the wide head.

On the right side of the rear wheel:

4. Remove the brake adjuster nut on the end of the actuating lever.
5. Remove the Toque link nut at the bottom of the wheel assembly.
6. Remove the axle nut (castle nut and cotter pin).

7. Place the motorcycle jack under the swing arm or chassis tubes to stabilize the rear end.
8. Remove the axle.
9. Remove the axle from the splined drive gear and place the wheel assembly on the ground.
10. Pull the wheel assembly rearward.

Reverse the process to replace the wheel.

Jan 03, 2011 | Suzuki VL 800 Volusia Motorcycles

1 Answer

Removal of rear wheel to repair puncture


In order to remove the rear wheel assembly, you are going to need a motorcycle lifting jack stand or similar device.

1. Stand the bike on the side stand

On the left side of the rear wheel:

2. Remove the 2 froward facing bolts.
3. Remove the allen head bolt with the wide head.

On the right side of the rear wheel:

4. Remove the brake adjuster nut on the end of the actuating lever.
5. Remove the Toque link nut at the bottom of the wheel assembly.
6. Remove the axle nut (castle nut and cotter pin).

7. Place the motorcycle jack under the swing arm or chassis tubes to stabilize the rear end.
8. Remove the axle.
9. Remove the axle from the splined drive gear and place the wheel assembly on the ground.
10. Pull the wheel assembly rearward.

Reverse the process to replace the wheel.

Jan 03, 2011 | 2001 Suzuki VL 800 Volusia

1 Answer

What is the proper procedure to remove the rear wheel from the 2002 Intruder 800 without damage to the driveline?


In order to remove the rear wheel assembly, you are going to need a motorcycle lifting jack stand or similar device.

1. Stand the bike on the side stand

On the left side of the rear wheel:

2. Remove the two forward facing bolts.
3. Remove the allen head bolt with the wide head.

On the right side of the rear wheel:

4. Remove the brake adjuster nut on the end of the actuating lever.
5. Remove the Toque link nut at the bottom of the wheel assembly.
6. Remove the axle nut (castle nut and cotter pin).

7. Place the motorcycle jack under the swing arm or chassis tubes to stabilize the rear end. Lift the motorcycle until the rear tire is just off the ground.
8. Remove the axle.
9. Remove the wheel from the splined drive gear and place the wheel assembly on the ground.
10. Pull the wheel assembly rearward.


Reverse the process to replace the wheel.

Sep 03, 2010 | Suzuki VS 800 Intruder Motorcycles

Not finding what you are looking for?
2006 BMW K 1200 S Logo

Related Topics:

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4995 Answers

Mike Gilbreath

Level 1 Expert

50 Answers

yadayada
yadayada

Level 3 Expert

80637 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...