Question about 2003 Yamaha YZ 250

2 Answers

Shifting problems i have an 07 yz250f. the clutch handle has to be nearly all the way out for the gear to engage. i can shift through the gears, but when i get on the gas, it just revs up, but no speed. is this just a clutch or tranny?

Posted by on

  • clive pearson
    clive pearson May 11, 2010

    Hi I am Vortash sorry to say it sounds like clutch if the clutch lever is almost right out when it engages and you get no power and probably some spin then your clutch plates have worn out , Rockitman is correct if it was your transmission ie: gearbox then you would have far more sounds and rattlings going on .. Regards Vortash

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,623 Answers

Your clutch is slipping and needs to be adjusted. Continued use will result in a burnt clutch and will require replacement, if it dosen't already.

Posted on May 19, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,559 Answers

Just replace the clutch,If it was the tranny,You would hear grinding and other metal to metal noises.

Posted on May 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My gear is stiff and experiencing a difficulty when engaging second gear. other gears seems to be fine but the shifting is not smooth.


I suspect that it will be in the shift mechanism
If it is a cable shift then replace the cable
If it levers or other linkages check and adjust or lubricate as required
I doubt it is in the clutch as you haven't mentioned difficulty in selecting first gear only shifting from 1 to 2nd.

Jun 21, 2015 | Opel Corsa Cars & Trucks

2 Answers

How do I fix my car having problems shifting into first gear?


I'm assuming that this is a manual transmission.
Old truck drivers trick...... Push in the clutch just as you try to put it into gear. If you do it too soon, it may make a grinding noise. Practice..... Thr trick is to have the transmission just barely rotating as you're grabbing the gear. Older vehicles can develop shifting issues as the synchro rings get worn. Pretend you're a trucker and feel the shift happen.

Mar 19, 2015 | 2009 Ford Focus SE

1 Answer

My KTM 125 EXC doesen`t go smoothly to first gear but will go fine to the other gears


Will start with the easy stuff first. How is your clutch adjustment? If the clutch isn't fully disengaged when you go into first, it will be very hard shift. If clutch adjustment is good then, you may have hard parts issues, like a bent shifting fork, or bent shift rod,

Dec 06, 2014 | KTM 125 EXC Motorcycles

3 Answers

I have a 2001 elantra. What would make it stay in reverse and 1st gear.it is a manual transmission


when you put it in reverse,first thing you feel a spring.after tthat you lift,
a security plate,this plate prevent you from going reverse into 1 gear.
cause the axel turn a little further when you allreddy has stop the car.
this takes two sec.thats why when putting it in reverse after you feel the spring you wait two seconds,then puch al the way in reverse.

Jul 26, 2014 | 2001 Hyundai Elantra

1 Answer

Noise when shifting gears


transmission synchronizers most common cause of transmisson noise in certain gears, and not others, might want to check the gear oil level. Transmission rebuild required. To read about them and what they actually do, then here is a good read:
When you shift gears in your standard shift car, you move a rod that moves a fork that engages the gear. Depending which gear you're shifting to, a different fork does the job. The fork moves the collar to the desired gear, and dog teeth on the collar mesh up with holes on the gear in order to engage it. You engage reverse gear through a separate, small idler gear. The reverse gear always turns in the opposite direction of the other (forward) gears.
In years past, double-clutching was common in order to disengage a gear, allow the collar and next gear to reach the same speed, and then to engage the new gear. To double-clutch shift, you pushed the clutch pedal to free the engine from the transmission. Then the collar moved into neutral. You released the clutch and revved the engine to get it to the right rpm value for the next gear so the collar and the next gear spun at the same rate to allow the dog teeth to engage the gear. When the engine hit the right speed, you depressed the clutch again in order to lock the collar into place on the next gear.
Modern cars use synchronizers in order to avoid the need for double-clutching. A synchronizer, or "synchro," lets the collar and gear synchronize their speeds while they're already in contact but before the dog teeth engage. Each manufacturer's synchro is slightly different than the others, but the basic idea is the same. For instance, a cone on one gear will fit into a cone-shaped depression on the collar. The gear and collar synchronize their speeds thanks to the friction between the cone and collar. Then the outer part of the collar moves out of the way so that the gear can be engaged by the dog teeth.

Dec 16, 2013 | Chevrolet Silverado 2500HD Cars & Trucks

1 Answer

Clutch problems gear plates


get your clutch plate checked or adjust clutch play

Nov 25, 2013 | 2007 Hero Honda Passion Plus

1 Answer

1987 saab 9000 turbo transmission


bad pressure plate or stuck throw out bearing.

Jun 06, 2012 | Saab 9000 Cars & Trucks

1 Answer

Shifting solenoids on 2002 Lancer.


For Automatic transmission problem,click the link below:---- Automatic transmission troubleshooting:----

http://howtobyme.blogspot.com/2011/11/automatic-transmission-will-not-go-into.html

---------
Automatic transmission shift lever issues?-------

http://technoanswers.blogspot.com/2012/01/automatic-transmission-shift-lever-hard.html

-----------
AUTOMATIC TRANSMISSION FLUID LEVEL? --

http://schematicsdiagram.blogspot.com/2011/07/how-to-check-automatic-transmission.html

--------------

AUTOMATIC TRANSMISSION FLUID AND FILTER?

http://schematicsdiagram.blogspot.com/2011/07/how-to-change-automatic-transmission.html

-----------
Transmission fault light on car dash?

http://schematicsdiagram.blogspot.com/2011/12/transmission-fault-light-on-car-dash.html

--------
Transmission shifting problem?

http://schematicsdiagram.blogspot.com/2012/01/transmission-shifting-problem-on-toyota.html

--------
Transmission Slips out of 2nd gear?

http://repairhelpcenter.blogspot.in/2012/02/transmission-slips-out-of-2nd-gear.html

-----------
OD light flashing and transmission fluid leaking?

http://repairhelpcenter.blogspot.in/2012/02/od-light-flashing-and-transmission.html

----------
Why Transmission fluid leaks near radiator?

http://repairhelpcenter.blogspot.in/2012/02/transmission-fluid-leaks-near-radiator.html

----------
Transmission fluid leaking?

http://technoanswers.blogspot.in/2012/02/ford-windstar-transmission-fluid.html

-------------
****** wont go in reverse?

http://technoanswers.blogspot.in/2012/02/dodge-neon-wont-go-in-reverse.html

-------------
Automatic transmission will not go into reverse?

http://technoanswers.blogspot.in/2012/02/dodge-automatic-transmission-will-not.html

----------
Transmission is making buzzing noise?

http://technoanswers.blogspot.in/2012/02/transmission-is-making-buzzing-noise.html

-----------

This will help.

Thanks.

Feb 08, 2012 | 2002 Mitsubishi Lancer

3 Answers

2002 Yamaha R1 shifting problem


sounds like your clutch plates are worn or theres not enough gear oil which is making it hard to engage while at running temperture

Jul 14, 2009 | 2001 Yamaha YZF-R1

2 Answers

Engaging 1st gear the gear grinds an clunks into


Often the transmission will clunk when first starting up and shifting into 1st. gear. To help alleviate this, hold the clutch lever in for thirty seconds or so before making that first shift into gear. This should make shifting into first much quieter.
This situation occurs on most of the FJRs, even when new.

Mar 05, 2009 | 2003 Yamaha FJR 1300 A

Not finding what you are looking for?
2003 Yamaha YZ 250 Logo

247 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...