Question about Motorcycles
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
YOU CAN ADJUST FLOATS WITHOUT SPECIAL TOOLS. ALL YOU NEED IS A FOOT LONG PIECE OF CLEAR TUBING, SIZED TO FIT THE BOWL DRAIN. SET FLOATS AS CLOSE TO WHAT THEY WERE WHEN YOU REPLACED IT. INSTALL THE BOWL AND PUT THE TUBE ON THE DRAIN. OPEN THE BOWL DRAIN SCREW WHILE HOLDING THE TUBE UP BESIDE THE CARB. WHEN YOU GET THE TUBE BESIDE THE CARB ASSY., THE GAS IN THE TUBE SHOWS YOU THE EXACT LEVEL OF FUEL IN THE BOWL. FROM THIS YOU CAN MAKE ANY ADJUSTMENTS NECESSARY FOR CORRECT LEVEL. THE LEVEL SHOULD BE RIGHT BELOW THE PLANE WHERE THE BOWL MEETS THE CARB BASE.
Posted on Oct 22, 2009
Hi,what I do is just bend the flange that dose the top of the float is level with the top of the float bowl,then put then screw the bowl back on hold the carb level put the fuel line on and see if the fuel is comeing out,if not job done,if there is fuel still comeing out then adjust by about a ml and try again,all the best.
Posted on Sep 16, 2015
Hi, Garth for more information about your question and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Float heights and how to adjust them
Mikuni VM34 Float Adjustment
Posted on May 24, 2016
Tips for a great answer:
Nov 13, 2016 | ATVs
Nov 13, 2016 | Mikuni Motorcycles
May 24, 2016 | Motorcycles
May 05, 2016 | Piaggio Motorcycles
Jan 11, 2016 | UM Motorcycles
Sep 11, 2015 | Suzuki Motorcycles
Jul 13, 2014 | 1981 Yamaha XS 650 H
Dec 02, 2013 | Motorcycles
Nov 03, 2013 | 1989 Yamaha FZX 750
64 people viewed this question
Usually answered in minutes!