Question about 2000 Yamaha XJ 900 S Diversion
I cannot get my bar ends to move on my XJ900S Diversion
Posted by Anonymous on
Hi, Anonymous for this scenario you will need your service/owners/ manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $ you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
How to put on take off scooter grips with bar ends
OEM parts for Yamaha
Yamaha diversion 900 XJ900S Owner Manual
Posted on Dec 18, 2016
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Fuel tank parts
Don't get a new one!!! If you're anyway handy, drain the tank, slip it off the bike & turn it upside down. Scribe a mark on the body of the unit to the tank to ensure you get it lined up again rebuilding. Unscrew the 4 retaining screws holding the sender unit in place. The rubber seal can be used again but examine it first. Carefully remove the sender unit, it's crooked in parts so you need to twist it at strange angles to get it out. Once it's out you will see the float/metal rod attached to a black bakealite holder. There is a tiny star shaped washer holding it in place, very easy to lose. Prise off the washer. Keep it safe. Upon inspection of the bakealite holder(potentiometer) you will see the metal rod has elongated the hole and thus sends a wrong signal to the fuel gauge on the dash. To counter this, get yourself some plumbers tape, the very thin stuff, and wrap it round the metal bar where it goes through the potentiometer, the part that is most worn. The trick is to get the metal rod to sit evenly & square to send the correct signal to the gauge. You may have to add or deduct some tape but make sure the float/rod moves freely before you rebuild it. This sounds gimmicky but in essence it's really handy and you save £50 on a new sender unit. Before you refit the little washer, gently squeeze it between a flat pair of pliers to tighten the little gripper teeth, then refit it. Press it home with pointy nose pliers. To test it you can attach it to the multiplug on the bike and move it manually with your hand whilst watching the dash. You should have a working fuel gauge. Mines been repaired like this for 4.5 years and it's as accurate as it was before it went wonky. Hope this helps.
Posted on Jun 01, 2009
SOURCE: tip of pilotscrew is broken
spot weld a screw to it using a MIG welder, make sure you take the carb off the bike 1st, and that its free from fuel, or vapours, else it will catch fire, once a screw is welded to it, use that screw to undo your other, as they are now classed as a complete screw, it should come out with ease.
Hope this helps!
Posted on Apr 30, 2011
Tips for a great answer:
Oct 21, 2017 | 2000 Yamaha XJ 900 S Diversion
Jun 02, 2017 | 1995 Yamaha XJ 600 Diversion S-N
Apr 14, 2017 | Yamaha XJ 900 S Diversion Motorcycles
Mar 02, 2014 | 1987 Yamaha XJ 900 F
Dec 28, 2013 | Yamaha Motorcycles
Oct 23, 2012 | 2003 Yamaha XJ 900 S Diversion
Sep 30, 2012 | 2000 Yamaha XJ 900 S Diversion
Apr 09, 2011 | 2000 Yamaha XJ 900 S Diversion
Feb 28, 2011 | 2003 Yamaha XJ 900 S Diversion
May 17, 2010 | 2000 Yamaha XJ 900 S Diversion
39 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: