Question about 2003 Yamaha YZ 125

1 Answer

Rear brake fluid replacement - 2003 Yamaha YZ 125

Posted by Anonymous on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.

  • Yamaha Master
  • 47,836 Answers

Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
How To Change Brake Fluid
Yamaha R1 Rear Brake Flush
YAMAHA YZ125 Owner Service Manual
OEM parts for Yamaha

Posted on Jul 15, 2016


2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 87 Answers

SOURCE: I have replaced rear brake

it should be right behind the foot brake on right side you can follow the rear brake line to it should be under that side cover

Posted on Aug 01, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

What is problem when rear wheel is leaking brake fluid ?

Probably the wheel cylinder is leaking, I would also check the brake
line going to the wheel cylinder as well.

Sep 26, 2014 | Vehicle Parts & Accessories

1 Answer

How do i replace brake fluid in 98 prism

In this situation, most likely there was a break-down in the brake system. Usually you only have one reservoir that services both front and rear brake systems. But to replace the fluid, obtain a Hayne's Repair manual. They go over brake fluid replacement.

May 05, 2012 | 1998 Chevrolet Prizm

1 Answer

1990 Reatta. Replaced all calipers and hoses. Cannot get fluid to rear brakes. Porportioning valve is OK. No fluid coming to it. Is there a way to cycle the master cylinder valves to cycle fluid...

I would try replaceing the master clylender and rebleed the brakes start at the right rear have some one help you press the brake paddle down and hold it open bleeder its where the brake line connects to the brakes looks like a greese fitting open the bleeder then close it let brake paddle back up repeat until you have fluid comeing out of bleeder go to the left rear do the same then right front to left front

Aug 23, 2011 | 1990 Buick Reatta

2 Answers

1995 buick lesabre. brakes are gone! fluid leaking from left rear brake.

If they are drum brakes then it is most likely the wheel cylinder. these are not expensive but you will need to replace the rear brake shoes and clean all the parts with brake clean. I recomend replacing the other cylinder while your at it.

Nov 22, 2010 | 1995 Buick Regal

1 Answer

How do i bleed rear brakes on 2006 heritage classic

First, remove the top cover from the rear brake master cylinder. Check the fluid level height. Make sure you're using the correct type of brake fluid. It's written what type to use right on the reservior top cover. Do NOT allow the reservior to run dry during the brake bleeding process and be careful with the brake fluid, it can damage your paint. Check the fluid level and temporarily replace the top cover on the master cylinder by just laying it on top of the reservior.

Now, to bleed the brakes you must do the following steps in this exact sequence.
  1. Depress the rear brake pedal and hold it down
  2. Open the brake bleeder valve on the rear caliper
  3. Allow air and brake fluid to bleed out
  4. Close the bleeder valve
  5. Release the brake pedal and allow the cylinder to refill for a short time.
  6. Check fluid level
  7. Repeat if the brake pedal is not high and firm.
Good Luck

Sep 23, 2010 | Harley Davidson FLSTC Heritage Classic...

1 Answer

I have replaced rear brake pads on a 2003 yamaha v star silverado and now I need to replace lost brake fluid. Where is the reservoir for rear brake fluid?

it should be right behind the foot brake on right side you can follow the rear brake line to it should be under that side cover

Aug 01, 2010 | Yamaha V Star Silverado Motorcycles

1 Answer

Rear brake not working on Buick Regal 2004

open the bleeder with someones foot on the pedal. If brake fluid sprays out, replace the caliper. If fluid doesn't spray out, replace the brake hose.

Mar 15, 2009 | 2004 Buick Regal

2 Answers

Brake light displays

Look at the master cylinder fluid level. If it is low, the red brake lamp will come on. Note that as the front brake pads wear, the brake fluid level will drop proportionally. If the fluid level is indeed low, you may need front brake pads, Unless you have a lot of miles on it, I doubt that you will need rear brake shoes. Also, if the fluid is low, don't add any. When you DO have to replace the pads, the additional fluid will be forced out of the cylinder and get all over your engine compartment under the master cylinder area . Brake fluid will eat the paint. Check the brake pads, replace them if the pad material is worn.

Sep 15, 2008 | 2007 Toyota Yaris

Not finding what you are looking for?
2003 Yamaha YZ 125 Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts


Level 2 Expert

314 Answers


Level 2 Expert

281 Answers


Level 3 Expert

1214 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides